• 대한소아치과학회지
• /
• 제29권1호
• /
• pp.51-56
• /
• 2002

러셀-실버 증후군(Russell-Silver syndrome)은 출생시 저신장, 편측성 비대칭과 성기관 발육의 다양성 및 그 외 cafe-aulait 반점, 만지증 등의 특징과 태아기부터 발현되는 성장지연을 보이는 질환이다. 이 신드롬과 관련된 안면 특징은 작고 삼각형의 얼굴과 짧은 안면고경, 구각부가 아래로 쳐진 입모양(shark's mouth) 작은 하악골과 흔히 좌우 비대칭이 있는 것이다. 현재까지 보고되고 있는 러셀-실버 증후군의 주요한 구강내 소견은 높은 구개궁(high-arched palate), 맹출 지연, 왜소치와 총생이다. 현재까지 세계적으로 약 150 증례가 보고되고 있으나 치의학적으로는 극히 드물다. 본 증례는 출생전 성장지연, 저신장, 저체중 등 임상소견을 통해 러셀-실버 증후군으로 진단받았고 성장호르몬 치료를 받았고, 현재 치료 중이다. 이 두 증례를 통해 러셀-실버 증후군의 구강내 특징을 보고하고, 관련 문헌을 고찰해 보고자 한다.

• 한국산림과학회지
• /
• 제62권1호
• /
• pp.87-95
• /
• 1983

솔잎혹파리가 소나무 생장(生長)에 미치는 영향(影響)을 그 발생경과년수(發生經過年數)가 서로 다른 충청남도(忠清南道) 서천군(舒川郡), 보령군(保寧郡), 홍성군내(洪城郡內) 9개(個) 지역(地域)에서 조사(調査), 비교(比較)하였다. 이 조사(調査)는 피해허용한계(被害許容限界)를 알기 위한 첫 단계(段階)로 소나무피해(被害)의 개황(槪況)을 본 것으로 얻어진 결과(結果)는 다음과 같다. 1) 솔잎혹파리가 발생(發生)된 소나무의 피해(被害)는 4~5년간(年間) 지속(持續)되는데 2~3년차(年次)에 가장 심(甚)하였다. 2) 솔잎혹파리의 충영형성(蟲廮形成)은 소나무의 직경생장(直径生長)과 수고생장(樹高生長)의 저해(沮害)를 동시(同時)에 일으킨다. 3) 소나무의 직경생장(直径生長)과 수고생장간(樹高生長間)에는 밀접(密接)한 상관관계(相關關係)가 있었으며 솔잎혹파리 피해(被害)에도 불구하고 이 관계(關係)는 교란되지 않았다. 따라서, 주신초(主新梢)의 생장저해(生長沮害) 상황(狀況)을 가지고 직경생장(直径生長)의 저해정도(沮害程度)를 추정(推定)할 수 있을 것이다. 4) 솔잎혹파리의 충영율(蟲廮率)은 북향(北向)에서 월등(越等)하게 높아 소나무의 고사(枯死)도 북향(北向)에서 높았다. 5) 솔잎혹파리로 인(因)한 13년생(年生) 소나무의 재적생장손실(材積生長損失)은 수확표와 비교(比較)할 때 75~85% 이상(以上)이 되고 이 피해(被害)는 정상적(正常的)인 생장(生長)을 되찾아도 복구(復舊)되기 어려울 것 같다.

• 한국자동차공학회논문집
• /
• 제9권4호
• /
• pp.204-213
• /
• 2001

This paper develops the compliance approach to the problem of load sharing between a cracked plate and a cover plate used to bridge the crack. The theory is validated by using calculated stress intensity factors for the covered and uncovered cases and by using stop hole method to reduce experimentally observed growth rates to a common base. Calculations are then made on the effect of cover plate width on fatigue crack retardation in order to demonstrate the predictive capability of the technique.

• 대한기계학회논문집
• /
• 제14권5호
• /
• pp.1193-1199
• /
• 1990

본 연구에서는 가공경화지수 (n)가 서로 다른 몇가지 재료를 선택하고 과대하 중의 비 (%PL)를 달리하는 단일 과대하중 피로 시험을 행하여 재료의 가공경화지수가 피로 균열 진파의 지연거동에 미치는 영향과 아울러 균열닫힘현상과의 관계를 구명하였다.

• 한국안전학회지
• /
• 제7권2호
• /
• pp.47-56
• /
• 1992

The retardation effect of fatigue crack propagation after cyclic overloading seems to be affected by strain hardening exponent. Namely, for the material with high values of n, the delay effect is found to be severe. We proposed a modified crack retardation equation which may apply the retardation of fatigue crack growth after a cyclic overloading, as (da/dN)'$_{cyc}$=($\mu$n＋λ)B $\Delta$ $K^{q}$ /[(1－ $R_{eff}$) $K_{cf}$ －$\Delta$K]. where, $R_{eff}$ is effective stress ratio [＝( $K_{min}$－K, os)/( $K_{max}$－ $K_{res}$)] The constants $\mu$＝－0.5 and λ＝0.6, and the values are found to be identical for materials such as aluminum (A 1060), steel (SS 34), brass ( $B_{s}$ SIB) and stainless steel (SUS 304) used in this investigation. (SUS 304) used in this investigation.ation.n.n.

• Clinical and Experimental Pediatrics
• /
• 제61권7호
• /
• pp.226-230
• /
• 2018

Purpose: This pilot study assessed changes in the growth plate and growth rates in children during a 6-month period. Methods: The study included 31 healthy children (17 boys, 14 girls) under evaluation for growth retardation. Height, weight, bone age, insulin like growth factor-1 (IGF-1), and insulin like growth factor binding protein 3 (IGF-BP3) were measured at baseline and after 6 months. In addition, the diameter, thickness, and volume of the femoral and tibial growth plates were measured using magnetic resonance imaging. Results: The mean bone age in boys and girls was 11.7 and 10.7 years, respectively. In boys, height (z score) (-0.2 vs. 0.0), weight (z score) (0.8 vs. 1.1), body mass index (BMI) (z score) (1.27 vs. 1.5), IGF-1 (ng/mL) (343.6 vs. 501.8), and IGF-BP3 (ng/mL) (5,088.5 vs. 5,620.0) were significantly higher after 6 months. In girls, height (z score) (-1.0 vs. -0.7), weight (z score) (-0.5 vs. 0.1), BMI (z score) (-0.02 vs. 0.3), IGF-1 (ng/mL) (329.3 vs. 524.6), and IGF-BP3 (ng/mL) (4,644.4 vs. 5,593.6) were also significantly higher after 6 months. In both sexes, the mean diameter and volume of the femoral and tibial growth plates were significantly increased 6 months later. Conclusion: No significant correlation was found between changes in the growth plate and clinical parameters in children with growth retardation in this study, other than correlations of change in femoral diameter with weight and BMI. A larger, long-term study is needed to precisely evaluate the correlation between change in the growth plate and growth.

• Food Science and Biotechnology
• /
• 제17권4호
• /
• pp.734-738
• /
• 2008

The physicochemical and in vitro physiological properties of soluble dietary fiber (SDF) from wax gourd (Benincasa hispida) pulp and peel were investigated. The pulp was composed of 11.4% SDF and 24.3% insoluble dietary fiber (IDF), while the peel contained 3.2% SDF and 43.3% IDE The predominant sugar in the SDF of the wax gourd pulp and peel was uronic acid, followed by galactose and rhamnose. The SDFs from the wax gourd pulp and peel gave similar elution patterns, with 4 main neutral sugar and uronic acid peaks eluted by 0.4, 0.5, 1, and 2 M ammonium acetate buffer. The pulp SDF had a much higher glucose retardation index (GRI) than the peel SDF for all measurement times. The pulp SDF showed strong growth-inhibiting activity against Escherichia coli and Clostridium perfringens, whereas the peel SDF produced strong growth-promoting activity against Bifidobacterium longum, Bifidobacterium infantis, and Lactobacillus brevis when compared to glucose.

• Journal of Genetic Medicine
• /
• 제17권2호
• /
• pp.83-88
• /
• 2020

Silver-Russell syndrome (SRS) is a rare genetic disorder characterized by intrauterine growth restriction, poor postnatal growth, relative macrocephaly, a triangular face, body asymmetry, and feeding difficulties. It is primarily diagnosed according to a clinical scoring system; however, the clinical diagnosis is confirmed with molecular testing, and the disease is stratified into the specific molecular subtypes. SRS is a genetically heterogeneous condition. The major molecular changes are hypomethylation of imprinting control region 1 in 11p15.5 and maternal uniparental disomy of chromosome 7 (UPD(7)mat). Therefore, first-line molecular testing should include methylation-specific approaches for these regions. Here, we report an extremely low birth weight (ELBW) infant with intrauterine growth retardation, postnatal growth retardation, and dysmorphic facial appearance-characteristics consistent with the clinical diagnostic criteria of SRS. Methylation-specific molecular genetic analysis revealed UPD(7)mat, while the loss of heterozygosity was not detected on chromosomal microarray analysis. We present a case of SRS with suspected uniparental heterodisomy of chromosome 7 in an ELBW infant.

• 산업기술연구
• /
• 제26권A호
• /
• pp.69-73
• /
• 2006

Mach peening treatment is one of the various kinds of techniques to improve the fatigue properties. The mach peening process gives high-level work hardening and compressive residual stress near the surface layer, improving the fatigue strength. In addition, this treatment reduces slip bands that initiate the fatigue cracks near the surface. During impingement, a plastic indentation surrounded by a plastic zone is formed. Mach peening treatment characteristic is less energy consumption and is an environmental friendly processing methods that is not accompanied by pollution. It is machining process that can prevent fatigue fracture beforehand in structure using already as well as process of production. The test results showed that fatigue crack propagation delay appeared by drilling type 43%, mach peening type 110%.

• 한국정밀공학회지
• /
• 제18권10호
• /
• pp.109-115
• /
• 2001

The compliance approach to the problem of load sharing between a cracked plate and multiple plate used to bridge the crack. The theory is validated by using calculated stress intensity factors for the multiple load path plate to reduce experimentally observed growth rate to a common base. Calculations are them made on the effect of multiple load path plate width on fatigue crack retardation in order to demonstrate the predictive capability of the technique.