The Use of Compliance to Investigate Fatigue Crack Retardation by Cover Plates and Stop Hole Expansion

컴프라이언스를 이용한 보강판재와 균열선단 구멍확장의 피로균열 진전 지연효과 규명

  • 한문식 (계명대학교 기계ㆍ자동차공학부)
  • Published : 2001.07.01

Abstract

This paper develops the compliance approach to the problem of load sharing between a cracked plate and a cover plate used to bridge the crack. The theory is validated by using calculated stress intensity factors for the covered and uncovered cases and by using stop hole method to reduce experimentally observed growth rates to a common base. Calculations are then made on the effect of cover plate width on fatigue crack retardation in order to demonstrate the predictive capability of the technique.

Keywords

References

  1. 일본경영간부 세미나 교재 기기구조물의 피로파괴와 방지 Uchino
  2. Boiler and Pressure Vessel Code(Addenda) ASME
  3. Structural Failure, Product Liability and Technical Insurance Fracture Control by Periodic Inspection with Fixed Comulative Probability of Crack Detections D.Brock;Rossmanith(Ed.)
  4. Eng. Fract. Mech. v.5 Residual Strength of Cracked Stiffened Panels H.Vlieger
  5. Rep MLR TR-70029 The Repair of Fatigue Cracks in Low Alloy Steel Sheet H.P.Van Leeuwen(et al.)
  6. Mater. Sci. Technol. v.4 Use of Adhesives in Repair of Cracks in Ship Structures R.C.Allan;J.Bird;J.D.Clarke
  7. Expl Mech. v.29 Stress-Intensity Factors in Plates with a Partially Patched Central Crack R.Chandra;A.Subramanian
  8. Theoret. Appl. Fract. Mech. v.5 Fracture Mechanics of Multiple Load Path Structure D.Rhodes
  9. Engineering Fracture Mechanics v.67 Calculation of Stress Intensity Factor using Weight Function Method for a Patched Crack with Debonding Region J.H.Kim;S.B.Lee
  10. Compendium of Stress Intensity Factors D.P.Rooke;D.J.Cartwright
  11. The Practical Use of Fracture Mechanics David Broek
  12. Summary of 12 Lecture Course Fracture Mechanics R.A.Smith