• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.12
• /
• pp.1131-1135
• /
• 2003

In the sintering of YIG, abnormal grain growth phenomena were observed. This abnormal grain growth is related to the sintering temperature in this experiment. In the sintering below 1450$^{\circ}C$, the sintered body showed narrow size distribution. However, in the sintering at 1450$^{\circ}C$, a few grains grew rapidly with respect to other grains, and bimodal size distribution was appeared. From the observation of the microstructure, liquid phase was not observed far from the abnormally grown large grains, but only near the large grains. This means that the abnormal grain growth was caused by the nonuniform distribution of liquid phase which promote the grains growth. Because the growth rate of grains near the liquid phase is much higher than that of the other grains, a few grains grow rapidly. This nonuniform distribution of liquid phase was thought to be due to the nonuniform mixing of the calcined powders. This abnormal grain growth was suppressed by enhancement of the compositional uniformity by multiple calcination.

• KSBB Journal
• /
• v.25 no.2
• /
• pp.193-198
• /
• 2010

Cell cultures of Taxus wallichiana Zucc. were made to enhance the production of anticancer agent paclitaxel. In suspension cultures, the maximum cell growth rate in exponential growth phase was 0.14 $day^{-1}$ which was correlated to 4.96 days of cell doubling time. The production of paclitaxel was non-growth associated. The paclitaxel production was started after the exponential growth phase and increased to declined phase where the maximum concentration was observed. Various elicitors were tested to enhance the production of paclitaxel. The combination of two elicitors of jasmonic acid and cellulase increased the production of paclitaxel 1.8 and 3.1 times compared to paclitaxel production by individual elicitor respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.466-469
• /
• 2002

In the sintering of YIG, abnormal grain growth phenomena was observed. This abnormal grain growth is related to the sintering temperature in this experiment. In the sintering below 145$0^{\circ}C$., the sintered body showed narrow size distribution. However, in the sintering at 145$0^{\circ}C$, a few grains grew rapidly with respect to other grains, and bimodal size distribution was appeared. Liquid phase was not observed far from the abnormally grown large grains, but only near the large grains. This means that the abnormal grain growth was caused by the nonuniform distribution of liquid phase which promote the grains growth. This nonuniform distribution of liquid phase was thought to be due to the nonuniform mixing of the starting materials. This abnormal grain growth was suppressed by enhance the compositional uniformity by multiple calcination.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1998.09a
• /
• pp.33-33
• /
• 1998

Invisible charged clusters are suggested to form in the gas phase and to become the growth unit in the thin film process. Similar suggestion had been made by Glasner el al. in the crystal growth of KBr and KCL in the solution where the lead ions were added. The charged cluster model, which was suggested in the diamond CVD process by our group, will be extended to the other thin film processes. It will be shown based on both the theoretical analysis and the experimental evidences that the charged clusters are formed in the gas phase and become the growth unit of the crystal in the thin film process.

• Journal of the Korean Ceramic Society
• /
• v.27 no.5
• /
• pp.677-683
• /
• 1990

Melt-textured growth of the YBa2Cu3O7-x phase from a supercooled melt created locally aligned, barshaped grains of the orthorhombic 1-2-3 phase. Based on all the observed phenomena, the gross mechanism of the melt-textrued growth of YBa2Cu3O7-x on the (100) plane of MgO was delineated by three basic patterns of reactions. These are : (ⅰ) formation of the aligned 1-2-3 phase and the Y-rich 2-1-1 phase at the bulk region away from the (100) plane of MgO ; (ⅱ) formation of the Cu-richprecipitates at the interfacial region by the selective interface-induced precipitation of the liquid phase ; (ⅲ) condensation reaction of the entrapped Cu-rich vapor with Mg atoms during the initial stage of rapid cooling from 130$0^{\circ}C$ to 98$0^{\circ}C$.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.8
• /
• pp.1150-1157
• /
• 2004

This experiment was conducted to investigate effects of phase feeding and sugar beet pulp (SBP) on growth performance, nutrient digestibility, nitrogen excretion, blood urea nitrogen (BUN) concentration and carcass characteristics in finishing pigs. A total of 128 pigs were allotted at 53.9 kg BW to 8 replicates in a 2$\times$2 factorial arrangement in a randomized complete block (RCB) design. The first factor was phase feeding (2 or 3 phase feeding) and SBP (SBP: 0% or 10%) was the second factor. Ten percent SBP supplement groups showed lower average daily feed intake (ADFI) than 0% SBP supplement groups (p<0.05). However, there were no significant difference in average daily gain (ADG) and feed:gain ratio among treatments during overall experimental period. Nutrient digestibility was not affected by phase feeding or SBP supplementation. Urinary nitrogen excretion in 10% SBP supplement group was lower than that in 0% SBP supplement group (p<0.05) and total nitrogen excretion was lower in SBP supplement group than in the group without SBP. Urinary and total nitrogen were numerically decreased in three phase feeding compared to two phase feeding. The BUN concentration in three phase feeding groups was lower than two phase feeding groups at 47 and 63 day (p<0.05). Consequently, results of this experiment demonstrated that three phase feeding was more acceptable than two phase feeding for finishing pigs. And sugar beet pulp could be supplemented in finishing pig diet for decreasing urinary nitrogen excretion without retardation in growth performance of pigs.

• Animal cells and systems
• /
• v.8 no.4
• /
• pp.313-317
• /
• 2004

A study was conducted to determine growth and survival rates of snakehead (Channa striata) larvae. Live foods such as Artemia salina nauplii, Moina micrura and bloodworm and artificial diet were given to larvae from 1-15 days after hatching as the 1st phase and from 15-30 days as the 2nd phase. In the 1st phase, the growth and survival rates of larvae fed with Artemia nauplii were significantly different from larvae fed with Moina (p < 0.05) with values of 28.5 mg, 49% and 26.7 mg, 31%, respectively. Meanwhile, all larvae fed with bloodworm (Chironomus sp.) or artificial diet (49% protein) died within 10 days of experiment. For the 2nd phase, growth of the fry fed with Artemia or Moina differed significantly from that fed with bloodworm or pellet (200.1, 187.7, 109.6 and 8.2 mg, respectively). Specific growth rate (SGR) of larvae fed with Moina was higher than that of larvae fed with Artemia (17.9 and 17.4% day$^{-1}$, respectively) in the 1st phase. In the 2nd phase, SGRs of larvae fed with Artemia (12.7% day$^{-1}$) or Moina (11.5% day$^{-1}$) were significantly higher than those of larvae fed with bloodworm (8.3% day$^{-1}$) or dry diet (6.1% day$^{-1}$). Generally, Artemia and Moina were suitable food for snakehead larvae during the first month of their life, and artificial diet was much less acceptable and resulted in poor growth and survival.

• Journal of the Semiconductor & Display Technology
• /
• v.10 no.3
• /
• pp.29-33
• /
• 2011

Film growth rate and composition variation are numerically analyzed during the selective area growth of InGaN on the GaN triangular stripe microfacet in this study. Both the vapor phase diffusion and the surface diffusion are considered to determine the In composition on the InGaN surface. To obtain the In composition on the surface, flux of In atoms due to the surface diffusion is added to the concentration determined from the Laplace equation which is governing the gas phase diffusion. The solution model is validated by comparing the growth rates from the analyses to the experimental results of GaN and InN films. The In composition and resulting wave length are increased when the surface diffusion is considered. The In content is also increased according to the increasing mask width. The effect of mask width to the In content and wave length is increasing in the case of a small open region.

• Korean Journal of Materials Research
• /
• v.12 no.4
• /
• pp.304-307
• /
• 2002

A zinc oxide (ZnO) single crystal was used as a substrate in the hydride vapor-phase epitaxy (HVPE) growth of GaN and the structural and optical properties of GaN layer were characterized by x- ray diffraction, transmission electron microscopy, secondary ion mass spectrometry, and photoluminescence (PL) analysis. Despite a good lattice match and an identical structure, ZnO is not an appropriate substrate for application of HVPE growth of GaN. Thick film could not be grown. The substrate reacted with process gases and Ga, being unstable at high temperatures. The crystallinity of ZnO substrate deteriorated seriously with growth time, and a thin alloy layer formed at the growth interface due to the reaction between ZnO and GaN. The PL from a GaN layer demonstrated the impurity contamination during growth possibly due to the out-diffusion from the substrate.

• Journal of the Korean Ceramic Society
• /
• v.43 no.11 s.294
• /
• pp.728-733
• /
• 2006

The equilibrium or growth shape of ceramic materials is classified largely into two categories according to the thermodynamic conditions imposed. One is a polyhedral shape where the surface free energy is anisotropic, and the other a spherical shape where the surface free energy is isotropic. In the case of grains with a polyhedral shape of anisotropic surface free energy, socalled abnormal grain growth usually takes place due to a significant energy barrier for a growth unit to be attached to the crystal surface. In the case of grains with a spherical shape of isotropic surface free energy, however, normal grain growth with a uniform size distribution takes place. In this contribution, the state-of-the-art of our current understanding of the relationship between the crystal shape and the microstructure evolution during the sintering of ceramic materials in the presence of a liquid phase was discussed.