• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.9
• /
• pp.1254-1262
• /
• 2021

Recently, the agricultural environment in Korea is rapidly changing due to the aging and decline of the agricultural population, and in order to solve these problems, it is urgently required to improve the agricultural productivity and reduce the labor force. To solve this problem, a smart farm fused with ICT technology is being proposed as an alternative. In Korea, smart farms are currently mainly used in greenhouses. In this paper, this smart farm technology is to be applied to the cultivation of sprouted ginseng. To this end, we use seedlings (about 1.0g) to grow a solid medium and bed for cultivating sprouted ginseng, a fresh ginseng that is produced in a short period of time (2~3 months) with a clean environment management technology that does not use chemical pesticides and hydroponics in a greenhouse developed. In addition, an IoT-based growth environment management system was developed to monitor the growth process of sprouted ginseng in such an environment and to control driving devices.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.4
• /
• pp.343-350
• /
• 2003

Using Bi$_2$Sr$_2$Ca$_2$.$_2$Cu$_3$ $O_{x}$ powders prepared by solid state reaction and spray drying method, the nucleation and growth behaviors of superconducting and second phases were investigated during isothermal heat treatment. When the spray drying power was used in contrast with solid state reaction powder, Bi$_2$Sr$_2$Ca$_2$.$_2$Cu$_3$ $O_{x}$ (2223) phase could be formed at the relatively shot time and second phases were much bigger. Quantitative analysis showed that as the heat treatment time increased, more Bi$_2$Sr$_2$Ca$_2$.$_2$Cu$_3$ $O_{x}$ (2212) changed to 2223 and the major second phase was changed from (Sr,Ca)$_{14}$Cu$_{24}$ $O_{x}$(14:24) to (Sr,Ca)$_2$Cu$_1$ $O_{x}$ (2:l). The superconducting phase formed at the relatively short time 14:24 phase. Following the Bi-free phase of 14:24 Phase, but long time was needed in places far from the 14:24 phase. Following the formation of the 2212 phase near the 14:24 phase, the 2223 phase nucleated preferentially at the interface between the 2212 and 14:24 phases. The preferential nuclcation of 2223 was explained by its structural similarity and low Interfacial energy with both the Bi-free and 2212 Phases.12 Phases.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.203-203
• /
• 2015

Gallium Oxide (Ga2O3) has been widely investigated for the optoelectronic applications due to its wide bandgap and the optical transparency. Recently, with the development of fabrication techniques in nanometer scale semiconductor materials, there have been an increasing number of extensive reports on the synthesis and characterization of Ga2O3 nano-structures such as nano-wires, nano-belts, and nano-dots. In contrast to typical vapor-liquid-solid growth mode with metal catalysts to synthesis 1-dimensional nano-wires, there are several difficulties in fabricating the nano-structures by using sputtering techniques. This is attributed to the fact that relatively low growth temperatures and higher growth rate compared with chemical vapor deposition method. In this study, Ga2O3 nanowires (NWs) were synthesized by using radio-frequency magnetron sputtering method. The NWs were then coated by Au thin films and annealed under Ar or N2 gas enviroment with no supply of Gallium and Oxygen source. Several samples were prepared with varying the post annealing parameters such as gas environment annealing time, annealing temperature. Samples were characterized by using XRD, SEM, and PL measurements. In this presentation, the details of fabrication process and physical properties of branched Ga2O3 NWs will be reported.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.3
• /
• pp.269-277
• /
• 1995

Ultrafine TEX>$Al_2O_3$ powders were prepared from $AlCl_3$ and $Al_2(SO_4)_3$3 by using inductively coupled plasma (lCP) of ultrahigh temperature (above 5000 K) in heat source. The prepared $Al_2O_3$ powders had ${\alpha} - group ({\alpha}, {wdelta} ;and; {\theta})$ phase, a narrow size distribution and around 20 nm in meansize. It could be suggested that gas - solid reaction growth and interparticle sintering occured at the center of ICP tail flame (X = 500 mm) through the results of deposited aggregates - flock, whisker and platy on MgO polycrystal plate. And the formation mechanism of $Al_2O_3$ powders In spray - ICP reactor were described from upper results.

• Journal of Sensor Science and Technology
• /
• v.16 no.3
• /
• pp.234-239
• /
• 2007

Crystallographically {h00}-oriented $0.94(Bi_{0.5}Na_{0.5})TiO_{3}-0.06BaTiO_{3}$ (0.94BNT-0.06BT) ceramics was prepared by the Reactive Templated Grain Growth (RTGG) method using the $Bi_{4}Ti_{3}O_{12}$ template. The sheets prepared by tape-casting of slurries containing the templates and starting materials are cut, laminated, and pressed. Then burn-out and sintering was conducted. Also, to compare with the 0.94BNT-0.06BT ceramics prepared by the RTGG method another 0.94BNT-0.06BT ceramics was prepared by the solid-state method. In the optimum of this experiments range, the degree of orientation of the 0.94BNT-0.06BT ceramics prepared by the RTGG method was texture fraction${\approx}92%$ and the piezoelectric constant($d_{33}$) and coupling factor($k_{p}$) was obtained to $d_{33}{\approx}205{\;}pC/N$, $k_{p}{\approx}0.33%$, respectively.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.3
• /
• pp.503-507
• /
• 1998

Sintering behavior and dielectric peroperties of $xCaTiO_3-La(Zn_{1/2}Ti_{1/2})O_3$ system were investigated for better understanding of the microwave dielectric materials. In $xCaTiO_3-(1-x)La(Zn_{1/2}Ti_{1/2})O_3$ systems, solid solution type was focused as a function of composition(x=0.4-0.6) and sintered density. With increasing the sintered density, the relative dielectric constant was decreased and Q value was increased and then saturated. In solid solution type, dielectric constant was increased with increasing $CaTiO_3$ content. In $0.5\;CaTiO_3-0.5\; La(Zn_{1/2}Ti_{1/2})O_3$ case, dielectric constant(=48) and temperature coefficient of resonace frequency$(=-1 ppm/^{\circ}C$) were obtained.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.1
• /
• pp.74-79
• /
• 1999

Langasite($La_3Ga_5SiO_14$) is a new piezoelectric material which is similar to quartz, LN($LiNbO_3$) and LT($LiTaO_3$) in its acoustic behavior. In this study, pure Langasite and Lagnasite family groups were synthesized by the solid state reactions in air. The diffusion species for synthesis were investigated and the sintered body was studied on dielectric property to comparison of characteristics. Also, Langasite single crystals were grown by self-designed Czochralski system and characterized.

• Journal of Plant Biotechnology
• /
• v.35 no.1
• /
• pp.75-80
• /
• 2008

In vitro culture of shoot tip of garlic (Allium sativium L. cv. Seosan) was carried out to find medium condition of the induction of multiple shoots and bulbing for muliproduction of virus-free seed bulbs. For this work, tank culture was introduced. In shoot tip culture on MS solid medium the induction of multiple shoots and bulbing were better by adding 3% sucrose than 8%. Supplementation with 2mg/L 2ip and 0.2 mg/L IAA in this medium was effective. Three point three shoots including 2.7 bulbs were formed from a shoot tip after cultivation for 30 days on this medium. Bulbing of garlic in liquid culture with plastic water tank of 20L supplied air at the side of the lower part was better by adding 3% sucrose than 8% by subculture for 45 days with shoots obtained from shoot tip culture for 30 days on soid MS medium. Shoot growth was vigorous at 3% sucrose however bulb growth was more effective on the medium of 8% sucrose. Because of the effectiveness on solid medium added 3% sucrose, 2 mg/L 2ip and 0.2 mg/L IAA for initial production of multi-shoot in stem tip culture and the effectiveness in liquid culture with water tank for growth of bulbs, the method of two-step culture could be introduced for the multiple production of seed bulb of high quality. It was more desirable by supply of 0.2 mg/L BA and 0.02 mg/L NAA at tank culture time. But growth of the bulbs became poor by increasing concentration of NAA of the medium.

• Horticultural Science & Technology
• /
• v.29 no.6
• /
• pp.531-538
• /
• 2011

This study was carried out to investigate the influence of defoliation by Marssonina blotch (Diplocarpon mali Harada et Sawamura) on vegetative growth and fruit quality in 'Fuji'/M.9 apple tree. Soluble solid contents decreased when the defoliation percentage by Marssonina blotch was over 10% before the end of September, and fruit weight decreased when percentage of defoliation was over 30%. Fruit red color and starch contents tend to decrease as percentage of defoliation near the fruit increased. Return bloom, fruit weight, and shoot growth the following year tend to decrease as percentage of defoliation increased. Photosynthetic rate of healthy leaves in bourse shoot during the end of September was maintained about $10{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, effects in increasing fruit growth and soluble solid contents after the end of September. Photosynthetic rates for the damaged leaf, damaged area was over 50% on the leaf surface, while 30% of the photosynthetic rates of healthy leaf are without damage applied with Marssonina blotch at the end of September. The results show that the decrease of fruit quality in defoliation treatments may be caused by the decrease of starch contents in fruit, and that was caused by the photosynthetic rates of leaves near fruit was decreased by Marssonina blotch in the wake of August.

• Korean Journal of Clinical Laboratory Science
• /
• v.51 no.2
• /
• pp.177-184
• /
• 2019

Mycobacteria grow slowly. Therefore, a solid medium should be used for eight weeks and a liquid medium for six weeks. The purpose of this study was to find the growth factors that can grow Mycobacterium rapidly and to help develop a solid medium for rapid identification. Three types of Mycobacterium growth factors were evaluated with 10 Mycobacteria by adding activated charcoal, defibrinated sheep blood, and L-ascorbic acid to $Difco^{TM}$ Mycobacteria 7H11 agar (Becton, Dickinson and Company, Sparks, MD, USA). The time to detection and the distinguishability of a colony were compared with that of the current method. In the rapidly growing Mycobacterium, the difference in detection time between the new media and conventional media confirmed that the new media was faster. M. kansasii and M. intracelluare grew faster in 7H11 C than in 7H11 medium. MTB grew faster than the other media in 7H11 C. This study confirmed that the two growth factors affect fast-growing Mycobacteria and slow-growing Mycobacteria. 7H11 C showed better distinguishability than the conventional media in all 10 Mycobacterium due to the color contrast. In particular, when the MTB was grown, the size of the colonies was larger than with other media, so visualization was easy.