• Journal of Korea Foundry Society
• /
• v.17 no.4
• /
• pp.379-384
• /
• 1997

Al-15Cu-lMg alloys have been directionally solidified in 3mm diameter alumina tubes under the conditions of $760^{\circ}C$ of furnace temperature and 12 cm/hr of furnace moving velocity(V). By analyzing the evolution of the temperature profiles along the alloy length, the position of the solid/liquid interface, temperature gradient(G) and local growth velocity (R) were determined. These growth characteristics were compared for 6, 10, 14 cm length alloys. Steady state growth region was obtained in 15 cm length alloy, not in 6, 10 cm.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.39 no.5
• /
• pp.410-418
• /
• 2006

Sexual maturity and growth characteristics of Octopus minor were investigated in 796 individuals from mud flats in Goorori, Muan-Goon, Korea. Gonadosomatic index (GSI) peaked between June and July in females and between November and January in males. The discrepancy in the index peaks between females and males might result from the earlier sexual maturation of males. The sex ratio was biased toward females (68%) in April and toward males (78%) in September, although the differences were not significant (p>0.05). In females, about 50% of individuals with a mantle length of 70.6 mm were sexually mature versus 100% of individuals with mantle lengths over 80 mm. In females, fecundity was also related to size, ranging from 44 eggs in individuals with a mantle length of 54 mm to 179 eggs in the female with a mantle length of 100.5 mm. The relationship between mantle length (ML) an body weight (BW) was BW=0.008 ML$^{2.2797}$ (n=389, r$^2$=0.83, p<0.01) in males and BW=0.029 ML$^{2.2797}$ (n=407, r$^2$=0.74, p<0.01) in females. Analysis of co-variation showed that the difference in the slopes of the two regression lines was significant (p<0.01). Analysis of mantle length-frequency for each month revealed 1 to 3 normal distribution modes. The growth parameters obtained by fitting the modal progression to the seasonalized von Bertalanffy growth function (VBGF) were ML$\infty$= 112.38 mm, K=1.9, C=0.90, and WP=0.1. The results indicate that the seasonal growth oscillation of the stock is very strong and winter is the season when growth is the slowest.

• Journal of Soil and Groundwater Environment
• /
• v.26 no.5
• /
• pp.1-8
• /
• 2021

A series of pot experiments were conducted to quantitatively estimate inhibitory effects of reclaimed soil on the growth of Lentil (Lens culinaris) with two soils remediated by land farming (DDC) and low temperature thermal desorption(YJ), respectively. After cultivation in a growth chamber for 8 days, plants were harvested for the analysis of 8 indices including chlorophyll-a and carotenoid in leaves, shoot fresh weight, root dry weight, root length, number of later roots, specific root length (SRL) as well as germination rate in comparison to control experiment conducted on nursery soil. Root length was estimated by SmartRoot program from the digital images of the roots. The results showed germination rate on YJ and DDC soil decreased 29 and 71%, respectively. In comparison to the control, the averaged value of the 8 indices for YJ and DDC soil showed overall growth inhibition was 48 and 68%, respectively. When the same experiment was conducted with 25% (W/W) vermiculate amended soil, plant growth on each soil was comparable to that of the control. The results implies reclaimed soils requires additional processes and/or amendments to reuse for plant growth.

• Journal of Acupuncture Research
• /
• v.22 no.2
• /
• pp.141-146
• /
• 2005

Objectives: To investigate the effect of Ginseng herbal acupuncture at GB39 and ST36 on growth in mice. Methods: Mice were divided into four groups (n=10); G-ST36 group treated with Ginseng Radix herbal acupuncture at right ST36, G-GB39 group treated with the same at GB39, Control-ST36 group and Control-GB39 group injected with saline at right ST36 and GB39 respectively. The saline injection and herbal acupuncture were performed 3 times a week for 3 weeks. The length( total height, body length and tail length), weight and the protein efficiency ratio were measured as well as IGF-I level in serum Results: The weights of Ginseng herbal acupuncture groups were not significantly increased compared to the control groups but the protein efficiency ratios were significantly higher in Ginseng herbal acupuncture groups compared to the control groups. The increases of the total length, body length and tail length were significantly higher in Ginseng herbal acupuncture groups than the control groups. The serum IGF-I level of G-GB39 was significantly increased compared to control-GB39, not that of G-ST36 compared to control-ST36. Conclusions: Ginseng herbal acupuncture at GB39 and ST36 are both effective to promote growth in terms of height and weight. GB39 may be effective for growth by way of increasing IGF-I, and more closely related to growth in height than ST36.

• Korean Journal of Environmental Agriculture
• /
• v.42 no.4
• /
• pp.297-310
• /
• 2023

M.7 rootstock is moderately resistant to fire blight. However, M.7 is generally too vigorous for high-density apple systems, but it can be grafted onto cultivars that exhibit weak tree growth, such as 'Sansa'. This study investigated the vegetative growth, yield, and fruit quality of 'Sansa' apple trees grafted on M.7 or M.9 rootstocks to assess the feasibility of establishing domestic high-density apple systems using M.7 and to determine the optimum exposure length for rootstocks. Trees were planted with exposed rootstock lengths of 5, 10, and 15 cm. The vegetative growth of apple trees grafted onto M.7 was greater than that of M.9 and vegetative growth tended to decrease as the exposed length of rootstock increased. However, the differences in yield per tree, average weights, soluble solids contents, and titratable acidity due to the rootstock and its exposure length varied. The accumulated yield over a 10 year period and the yield efficiency of M.7 were lower than that of M.9 and the yield efficiency tended to decrease as the exposed length of rootstock increased. When apple trees were grafted onto M.9, biennial bearing and tree vigor weakening occurred if the exposed length of the rootstock was over 10 cm. Conversely, when apple trees were grafted onto M.7, vegetative growth was excessive if the exposed length of rootstock was below 10 cm. Based on the results from this study, the optimum M.7 and M.9 exposure lengths for 'Sansa' were 15 cm and 5 cm, respectively.

• Horticultural Science & Technology
• /
• v.30 no.1
• /
• pp.13-20
• /
• 2012

This study was carried out to examine the effect of cutting condition on the growth of rooted cuttings and their subsequent growth of cut flower in plug cutting of Dendranthema grandiflorum 'Baekma'. The more leaves were attached to the cutting, the higher shoot growth of rooted cutting was observed. Cutting with two to six leaves was effective in shoot growth and rooting than any other treatment. Shoot growth of rooted cutting was not affected by cutting length, but rooting was better in 5 to 7 cm long cutting. Shoot growth and rooting of rooted cutting was promoted by increasing the cutting diameter, and rooting was better in 3.6-4.2 mm thick cutting than 3.1 mm thick cutting. As the treating concentration of NAA increased, shoot growth was inhibited and root length shortened in rooted cutting. Soaking with $100mg{\cdot}L^{-1}$ ${\alpha}$-naphtalene acetic acid (NAA) for 1 h was effective in shoot growth and rooting. Root growth such as root number, root length, and root weight was better in rooting medium mixed with 2:2 of peatmoss:perlite than the other treatments. When rooted cutting produced from cutting with four or six leaves was planted, better length, weight, and leaf number of cut flower was observed. In rooted cutting produced with 7-9 cm long cutting, growth of cut flower such as length, weight, and ray flower number was more effective than the others. Therefore, it is recommended that the 7 cm long and 3.6 mm thick cutting with four to six leaves is used to improve their rooting and subsequent growth of cut flower in plug cutting of Dendranthema grandiflorum 'Baekma'.

• Korean Journal of Medicinal Crop Science
• /
• v.18 no.1
• /
• pp.51-55
• /
• 2010

This study was conducted to investigate the effect of planting position on the growth characteristics, yield and ginsenoside content in Panax ginseng C.A. Meyer at different growth stages. Referring to shoot growth characteristics, stem length, stem diameter and leave area were higher at front than rear, increasing as the proceeding of growth stages. But a lower chlorophyll contents was caused at front compared to rear and decreased as the proceeding of growth stages contrarily. According to root characteristics, root length and main body length were higher at front, with a positive correlation to growth stages, which was also shown on fresh root weight and dry root weight with the maximum in August. Meanwhile, the effect of planting position on ginsenoside content could also be definite by the highest content at front showing high light intensity, increasing as the proceeding of growth stages as well.

• The Korean Journal of Ecology
• /
• v.6 no.2
• /
• pp.106-113
• /
• 1983

The growth of Korean axolotl., Hynobius leechii, was analyzed in natural water as control group and in six copper ion groups contaminated by 0.1, 0.2, 0.3, 0.4, 0.5, 0.6 ppm of copper ion. The copper ion checks the growth of the axolotl. The axolotl was not survived during 30 days in the copper ion of 0.3ppm, and, in the 0.4ppm the axolotl was not survived during 10 days after hatch. The growth of head width and body length show a convexing increase pattern, while that of hind leg shows a concaving increase pattern. The copper ion checks the development of hind leg. In the growth quantity of head width, body length and hid leg, that of natural water show the most rapid increase pattern, and copper ion groups of 0.1, 0.2, 0.3ppm follow in that order. The coefficient of relative growth($\alpha$) of control group is the greater value, and the copper ion groups of 0.1, 0.2, 0.3ppm follow in that order. The contaminated groups show the negative allometry in the relative growth of the containated groups to the natural water. Body length shows positive allometry, while hind leg shows negative allometry in the relative growth to head width.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.43 no.3
• /
• pp.223-230
• /
• 2010

To compare seed collection and the growth of Anadara subcrenata in Suncheon and Boseong Bays, environmental factors and the growth of larvae and spats were investigated from August 2008 to July 2009 in commercial farming sites in both bays. The variation in water temperature in both bays was similar, but the salinity was lower in Suncheon Bay than in Boseong Bay. The chlorophyll-a content was higher in Suncheon Bay due to the large inflow of freshwater. The density and shell length of A. subcrenata larvae did not differ significantly between the two bays. However, the relative growth of shell height to shell length was significantly higher in Suncheon Bay (P<0.05). The growth of A. subcrenata spats attached to a collector was significantly faster in Suncheon Bay (P<0.05). The spats in Suncheon and Boseong Bays grew to 24.3 and 21.0 mm in shell length, respectively, within 1 year after spawning, and the shell length reached 35.6 and 34.8 mm, respectively, within 2 years of spawning. The initial spats density was higher in Boseong Bay, but the growth of spats was better in Suncheon Bay. The faster growth of A. subcrenata in Suncheon Bay can be explained by the high chlorophyll-a content in this bay. Based on the low survival (%) and slower growth rate of spats in Boseong Bay, the commercial culture density of A. subcrenata in Boseong Bay should be reduced to the optimum level of the carrying capacity.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.35 no.5
• /
• pp.72-79
• /
• 2003

Nalita wood (Trema orientalis), one of the fastest growing woods in the world, is characterized anatomical, morphological and chemical properties at annual growth ring level in order to investigate as papermaking raw material. The proportion of fibers and vessel was increased with an increase of growth ring (from pith to bark). The fiber length of Nalita was increased with increasing growth ring, and an average fiber length was about 817 um. The average basic density of Nalita was about 0.38 g/cc. The total lignin & holocellulose in Nalita were increased and ash & alcohol-benzene extract decreased from pith to bark. These values were about 23.5 - 24.4 ％, 78.1 - 80.1 ％, 1.04 - 0.92 ％ and 2.1 - 1.8 ％, respectively. The xylan was the predominant sugar in the hemicellulose of Nalita.