• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.1
• /
• pp.8-17
• /
• 2003

Fracture behaviors of pipes with local wall thinning are very important for the integrity of nuclear Power Plant. In Pipes of energy Plants, sometimes, the local wall thinning may result from severe erosion-corrosion (E/C) damage. However, the effects of local wall thinning on strength and fracture behaviors of piping system were not well studied. In this paper, the monotonic bending tests were performed of full-scale carbon steel pipes with local wall thinning. A monotonic bending load was applied to straight pipe specimens by four-point loading at ambient temperature without internal pressure. From the tests, fracture behaviors and fracture strength of locally thinned pipe were manifested systematically. The observed failure modes were divided into four types; ovalization. crack initiation/growth after ovalization, local buckling and crack initiation/growth after local buckling. Also, the strength and the allowable limit of piping system with local wall thinning were evaluated.

• Journal of Korean Society for Quality Management
• /
• v.40 no.3
• /
• pp.278-285
• /
• 2012

Purpose: Weapon systems have the long life cycle unlike the consumer product. Thus, the reliability of weapon system is improved during the life cycle through the steady technical change. In this paper, we deal with the method of evaluating the reliability of weapon system with the field failure data. Methods: Especially, we present how to gather the field failure data and evaluate the reliability through the case of K-series weapon system. To evaluate reliability, the reliability growth model is used and the result is discussed. Results: It is steadily improved the reliability of K-series weapon system deployed from 2000 to 2004. The frequency of the failures that affect the mission is largely reduced and MTBMF(mean time between mission failure) is also improved. Conclusion: We can guess the trend of the reliability of weapon system with the field data through this study. Furthermore, it can be used to improve the reliability and make maintenance policy.

• Korean Journal of Materials Research
• /
• v.15 no.1
• /
• pp.54-60
• /
• 2005

Recently a lots of problems have observed in high densified and high integrated electronic components. One of them is ion migration phenomena, which induce the electrical short of electrical circuit. ion migration phenomena has been observed in the field of exposing the specific environment and using for a long tin e. This study was evaluated the generation time of ion migration and was investigated properly test method through water drop test and high temperature high humidity test. Also we observed direct causes and confirmed generation mechanism of dendritic growth as we reproduced the ion migration phenomena. We utilized PCB(printed circuit board) having a comb pattern as follows 0.5, 1.0, 2.0 mm pattern distance. Cu, SnPb and Au were electroplated on the comb pattern. 6.5 V and 15 V were applied in the comb pattern and then we measured the electrical short time causing by ion migration. In these results, we examined a difference of ion migration time depending on pattern materials, applied voltage and pattern spacing of PCB conductor.

• Childhood Kidney Diseases
• /
• v.9 no.1
• /
• pp.102-107
• /
• 2005

With the advent of hemodialysis, the success of renal transplants in the 1960s and the wide use of continuous ambulatory peritoneal dialysis at the end of the 1970s, children with renal failure now enjoy an extended life span. As a result, several children experience renal osteodystrophy and growth retardation. Renal osteodystrophy is induced by phosphorus retention, hypocalcemia, low vitamin D levels and hyperparathyroidism. The pharmacologic interventions are used to prevent bone deformities and to normalize growth velocity. But surgical intervention is required sometimes whorl osteodystrophy is severe and poorly controlled. We report an eight-year-old boy with ctironic renal failure who developed severe bone deformities and needed osteotomy.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.3 s.192
• /
• pp.84-90
• /
• 2007

As a result of vehicle maintenance of rocker arm shaft for 4-cylinder SOHC engine, failure stress analysis of rocker arm shaft is needed. Because more than 30% of vehicles investigated have been fractured. Failure stress analysis is classified into an naked eyes, microscope, striation and X-ray fractography etc. Failure stress analysis by using striation is already established technology as means for seeking cause of fracture. But, although it is well known that striation spacing corresponds to the crack growth rate da/dN, it is not possible to determine ${\sigma}_{max}\;and\;{\sigma}_{min}$ under service loading only from striation spacing. This is because the value of striation spacing is influenced not only by ${\Delta}K$ but also by the stress ratio R. In the present paper, we determine the stress ratio using orthogonal array and ANOVA, and propose a prediction method of failure stress which is combined with FEM and striation.

• The Journal of Pediatrics of Korean Medicine
• /
• v.21 no.1
• /
• pp.155-171
• /
• 2007

Objectives : The aim of this study was to investigate the treatment of failure to thrive in current Traditional Chinese Medical Journals. Methods : To figure out the failure to thrive, Chinese Medical Journals from China National Knowledge Infrastructure(CNKI) which was published in 1994 to 2005 were analyzed. 矮(小)-whae(so) was searched. Results : Eleven articles were selected. 5 of them were used herbal medicine, and were showed that the total improvement rate was higher than 70% in failure to thrive. 2 of them were used acupuncture, and the last of them were used a therapy of combining Traditional Chinese Medicine with western medicine. Conclusions : The Oriental medical treatments for failure to thrive were presumed to be effective in most articles. But we think that the more studies are needed.

• Asian Journal of Innovation and Policy
• /
• v.9 no.3
• /
• pp.308-338
• /
• 2020

The entrepreneurial journey is not short of challenges, and about 90% + tech start-ups experience failure (Startup Genome, 2019). The magnitude of the challenges varies across the tech start-up lifecycle stages, namely emergence, stability, and growth. This opens the research question, do the profiles of a start-up and its co-founder impact start-up success or failure across its lifecycle stages? This study aims to understand and identify the profiles of tech start-ups and their co-founders. We gathered primary data from 151 start-ups (Status: 101 failed and 50 successful ones), and they are across different lifecycle stages and represent six major start-up hubs in India. The chi-square test on status and start-up's lifecycle stage indicates a noticeable correlation, and they are not independent. The Kruskal Wallis test was used to distinguish statistically significant profile attributes. The parameters distinguishing success and failure are identified, and the need to deliver customer experience is emphasized by the start-up profile attributes: Product/service, high-tech nature of a start-up, investor fund availed, co-founder experience, and employee count. The importance of entrepreneurial experience is ascertained with entrepreneur profile attributes: Entrepreneurial expertise, the number of prior and current start-ups, their willingness to start again in the event of failure, and age of co-founder, which is a proxy to learning and experience. This study has implications for entrepreneurs, investors, and policymakers.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1999.04a
• /
• pp.321-326
• /
• 1999

In this study, fatigue crack propagation problem of plate under multi-axial loading is mainly considered To analyze this special problem, recently developed technique called EFGM(Element-Free Galerkin Method), one of the Meshfree Methods, and general fatigue crack growth raw herein Paris law are used Using the Implemented scheme, paths of fatigue cracks by constant-amplitude load fluctuation and multiple-crack growth behavior are examined. The failure mechanism of steel plate due to crack propagation is studied. As a result, an algorithm that treats multiple fatigue crack problems is proposed. A numerical example shows that the prediction of growing paths can be achieved successfully and efficiently by proposed algorithm.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.11a
• /
• pp.173-176
• /
• 2005

This study look into the mechanisms of growth and magnification in the cracks and delamination on the beams repaired with CFS. The experimental parameters was a loading type, loading speed and pre-crack. In the experiments, it was confirmed that the failure of beams began with development and propagation of the delamination in the below the loading point due to magnification of cracks, but it was not concerned with loading type, loading speed and pre-cracks. Particularly, in the case of beams having the pre-cracks, growth of crack concentrated at the special crack below the loading point and led to failure of the beam by delamination due to magnification of crack.

• Journal of the Korean Ceramic Society
• /
• v.28 no.9
• /
• pp.712-720
• /
• 1991

The effect of cyclic compressive stress on fracture responses of Al2O3 was investigated under uniaxial stress cycling. Experimental data were obtained for Al2O3 tension specimens under uniaxial tension-unloading and tension-compression cyclic loading conditions. To investigate the effect of compressive stress on the crack growth, theoretical results from the crack growth rate were compared with measured stress vs. failure relations. At low stress level in tension-compression cycling, residual tensile strains were also observed about failure time.