• 터널과지하공간
• /
• 제19권2호
• /
• pp.95-106
• /
• 2009

암석파괴역학과 파괴인성 이하의 응력상태에서 균열이 발생하고 성장하는 특성을 고려하여 암반사면의 진행성 파괴를 검토하였다. 굴착이 종료된 암반사면은 응력이 거의 변하지 않은 조건이지만, 시간이 경과함에 따라 절리면 내 미소한 접점에서 파괴가 발생하고 파괴된 접점의 수효가 증가함에 따라 절리면이 파괴되고, 파괴된 절리면이 많아져 사면이 파괴되는 진행성파괴 현상을 수치해석적으로 확인하였다. 따라서 암반사면의 진행성 파괴는 파괴인성보다 낮은 응력상태에 있는 암반 절리면 내 미소한 접점에서 시간의 경과에 따라 발생한 균열이 성장하여 사면을 파괴시키는 것으로 분석되었다.

• Clinical and Experimental Pediatrics
• /
• 제60권3호
• /
• pp.64-69
• /
• 2017

Purpose: The goal of nutritional support for very-low-birth-weight (VLBW) infants from birth to term is to match the in utero growth rates; however, this is rarely achieved. Methods: We evaluated postdischarge growth patterns and growth failure in 81 Korean VLBW infants through a retrospective study. Weight and height were measured and calculated based on age percentile distribution every 3 months until age 24 months. Growth failure was defined as weight and height below the 10th percentile at 24 months. For the subgroup analysis, small-for-gestational age (SGA) and extremely low birth weight (ELBW) infants were evaluated. The growth patterns based on the Korean, World Health Organization (WHO), or Centers for Disease Control and Prevention (CDC) standard were serially compared over time. Results: At postconception age (PCA) 40 weeks, 47 (58%) and 45 infants (55%) showed growth failure in terms of weight and height, respectively. At PCA 24 months, 20 infants (24%) showed growth failure for weight and 14 (18%) for height. Growth failure rates were higher for the SGA infants than for the appropriate-weight-for-gestational age infants at PCA 24 months (P=0.045 for weight and P=0.038 for height). Growth failure rates were higher for the ELBW infants than for the non-ELBW infants at PCA 24 months (P<0.001 for weight and P=0.003 for height). Significant differences were found among the WHO, CDC, and Korean standards (P<0.001). Conclusion: Advancements in neonatal care have improved the catch-up growth of VLBW infants, but this is insufficient. Careful observation and aggressive interventions, especially in SGA and ELBW infants, are needed.

• International Journal of Quality Innovation
• /
• 제5권1호
• /
• pp.110-121
• /
• 2004

There is a new trend of incorporating software coverage metrics into software reliability modelling. This paper proposes a coverage-based software reliability growth model. Firstly, the failure rate function in coverage is analytically derived. Then it is shown that the number of detected faults follows a Nonhomogeneous Poisson distribution of which intensity function is the failure rate function in coverage. Practical applicability of the proposed models is examined by illustrative numerical examples.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• 제12권sup1호
• /
• pp.41-45
• /
• 2009

Optimal nutrition in infancy and early childhood is the success behind good health, growth, and development of children. Failure to thrive may be the end point of any combination of a nutritional disorder, poor growth, and psychosocial deprivation. Hospital admission is rarely necessary and may be counterproductive. Day attendance, for investigation and observation of child-parent interaction, may be more valuable. Nutritional supplementation, together with nutritional counseling, can improve food intake and growth in children with failure to thrive.

• Nuclear Engineering and Technology
• /
• 제39권2호
• /
• pp.129-132
• /
• 2007

It is generally known that software reliability growth models such as the Jelinski-Moranda model and the Goel-Okumoto's non-homogeneous Poisson process (NHPP) model cannot be applied to safety-critical software due to a lack of software failure data. In this paper, by applying two of the most widely known software reliability growth models to sample software failure data, we demonstrate the possibility of using the software reliability growth models to prove the high reliability of safety-critical software. The high sensitivity of a piece of software's reliability to software failure data, as well as a lack of sufficient software failure data, is also identified as a possible limitation when applying the software reliability growth models to safety-critical software.

• 산업경영시스템학회지
• /
• 제36권4호
• /
• pp.100-108
• /
• 2013

In aerospace industry, MTBF (Mean Time Between Failure) and MFTBF (Mean Flight Time Between Failure) are generally used for reliability analysis. So far, especially to Korean military aircraft, MFTBF of avionic equipments is predicted by MIL-HDBK-217 and MIL-HDBK-338, however, the predicted MFTBF by military standard has a wide discrepancy to that of real-world operation, which leads to overstock and increase operation cost. This study analyzes operational data of avionic equipments. Operational MFTBF, which is calculated from operational data, is compared with predicted MFTBF calculated conventionally by military standard. In addition, failure rate trend is investigated to verify reliability growth in operational data, the investigation shows that failure rate curve from operational data has somewhat pattern with decreased failure rate and constant failure rate.

• 한국안전학회지
• /
• 제21권1호
• /
• pp.28-34
• /
• 2006

A procedure of estimating failure probability is demonstrated for a pressurized pipe of CrMo steel used at $538^{\circ}C$. Probabilistic fracture mechanics were employed considering variations of pressure loading, material properties and geometry. Probability density functions of major material variables were determined by statistical analyses of implemented data obtained by previous experiments. Distributions of the major variables were reflected in Monte Carlo simulation and failure probability as a function of operating time was determined. The creep crack growth life assessed by conventional deterministic approach was shown to be conservative compared with those obtained by probabilistic one. Sensitivity analysis for each input variable was also conducted to understand the most influencing variables to the residual life analysis. Internal pressure, creep crack growth coefficient and creep coefficient were more sensitive to failure probability than other variables.

• Nuclear Engineering and Technology
• /
• 제53권1호
• /
• pp.304-313
• /
• 2021

Nickel base Alloy X-750, which is used as fastener parts in light-water reactor (LWR), has experienced many failures by environmentally assisted cracking (EAC). In order to improve the reliability of passive components for nuclear power plants (NPP's), it is necessary to study the failure mechanism and to predict crack growth behavior by developing a probabilistic failure model. In this study, The Bayesian inference was employed to reduce the uncertainties contained in EAC modeling parameters that have been established from experiments with Alloy X-750. Corrosion fatigue crack growth rate model (FCGR) was developed by fitting into Paris' Law of measured data from the several fatigue tests conducted either in constant load or constant ΔK mode. These parameters characterizing the corrosion fatigue crack growth behavior of X-750 were successfully updated to reduce the uncertainty in the model by using the Bayesian inference method. It is demonstrated that probabilistic failure models for passive components can be developed by updating a laboratory model with field-inspection data, when crack growth rates (CGRs) are low and multiple inspections can be made prior to the component failure.

• Geomechanics and Engineering
• /
• 제35권4호
• /
• pp.333-366
• /
• 2023

Rock as a mass generally exhibits discontinuities, commonly witnessed in rock slopes and underground structures like tunnels, rock pillars etc. When these discontinuities experiences loading, a new crack emerges from them which later propagates to a macro scale level of failure. The failure pattern is often influenced by the nature of discontinuity, geometry and loading conditions. The study of crack growth in rocks, namely its initiation and propagation, plays an important role in defining the true strength of rock and corresponding failure patterns. Many researchers have considered the length of the discontinuity to be fully persistent on rock or rock-like specimens by both experimental and numerical methods. However, only during recent decades, there has been a substantial growth in research interest with non-persistent discontinuities where the crack growth and its propagation phenomenon were found to be much more complex than persistent ones. The non-persistence fractures surface is generally considered to be open and closed. Compared to open flaws, there is a difference in crack growth behaviour in closed or narrow flaws due to the effect of surface closure between them. The present paper reviews the literature that has contributed towards studying the crack growth behaviour and its failure characteristics on both open and narrow flaws subjected to uniaxial and biaxial compression loading conditions.

• 한국정보기술응용학회:학술대회논문집
• /
• 한국정보기술응용학회 2005년도 6th 2005 International Conference on Computers, Communications and System
• /
• pp.143-146
• /
• 2005

The software reliability growth depends on the testing time because the failure rate varies whether it is long or not. On the other hand, it might be difficult to reduce failure rate for most of the cases are not available for debugging during operational phase, hence, there are some literatures to study that the failure rate is uniform throughout the operational time. The failure rate reduces and the reliability grows with time regardless of debugging. As a result, the products reliability varies with the time duration of these products in point of customer view. The reason of this is that it accumulates the products experience, studies the exact operational method, and then finds and takes action against the fault circumstances. I propose the simple model to represent this status in this paper.