DOI QR코드

DOI QR Code

Bayesian model updating for the corrosion fatigue crack growth rate of Ni-base alloy X-750

  • Received : 2020.03.26
  • Accepted : 2020.06.15
  • Published : 2021.01.25

Abstract

Nickel base Alloy X-750, which is used as fastener parts in light-water reactor (LWR), has experienced many failures by environmentally assisted cracking (EAC). In order to improve the reliability of passive components for nuclear power plants (NPP's), it is necessary to study the failure mechanism and to predict crack growth behavior by developing a probabilistic failure model. In this study, The Bayesian inference was employed to reduce the uncertainties contained in EAC modeling parameters that have been established from experiments with Alloy X-750. Corrosion fatigue crack growth rate model (FCGR) was developed by fitting into Paris' Law of measured data from the several fatigue tests conducted either in constant load or constant ΔK mode. These parameters characterizing the corrosion fatigue crack growth behavior of X-750 were successfully updated to reduce the uncertainty in the model by using the Bayesian inference method. It is demonstrated that probabilistic failure models for passive components can be developed by updating a laboratory model with field-inspection data, when crack growth rates (CGRs) are low and multiple inspections can be made prior to the component failure.

Keywords

Acknowledgement

This research was a part of the project titled 'Development of the safety standards for marine hydrogen storage vessels and fuel supply systems', funded by the Ministry of Oceans and Fisheries, Korea. This work was also financially supported by the Material and Component Fusion Alliance (No. 1415166303) of the Ministry of Trade, Industry and Energy, Korea.

References

  1. L.J. Bond, S.R. Doctor, T.T. Taylor, Proactive Management of Materials Degradation - A Review of Principles and Programs, Pacific Northwest National Laboratory, USA, 2008.
  2. S.R. Doctor, L.J. Bond, S.E. Cumblidge, A.B. Hull, S.N. Malik, C.E. Carpenter, The proactive management of materials degradation (PMMD) and enhanced structural reliability, in: International Conference on Structural Mechanics in Reactor Technology (SMiRT 20), Finland, 2009.
  3. A.N. Rumyantev, Quantile estimate of the uncertainties of probabilistic safety analysis for objects of the nuclear power Industry, Atom. Energy 101 (3) (2006) 617-624. https://doi.org/10.1007/s10512-006-0141-1
  4. Iaea, Component Reliability Data for Use in Probabilistic Safety Assessment, IAEA-TECDOC-478, 1998.
  5. T.H. Lee, J.Y. Yoon, H.O. Nam, I.S. Hwang, A probabilistic environmentally assisted cracking model for steam generator tubes, ASME. J. Pressure Vessel Technol. 137 (2) (2014), 021204-021204-7.
  6. T. Kekkonen, H. Hanninen, The effect of heat treatment on the microstructure and corrosion resistance of inconel X-750 alloy, Corrosion Sci. 25 (8/9) (1985) 789-803. https://doi.org/10.1016/0010-938X(85)90011-3
  7. W.J. Mills, M.R. Lebo, J.J. Kearns, Hydrogen embrittlement, grain boundary segregation and stress corrosion cracking of alloy X-750 in low and high-temperature water, Metall. Mater. Trans. 30A (1999) 1579-1606.
  8. D.M. Symons, A.W. Thompson, The effect of hydrogen on the fracture of alloy X-750, Metall. Mater. Trans. 27A (1996) 101-110.
  9. A. Turnbull, R.G. ballinger, I.S. Hwang, M.M. Morra, M. Psaila-Dombrowski, R.M. Gates, Hydrogen transport in nickel-base alloys, Metallurgical Transactions A 23 (1992) 3231-3244. https://doi.org/10.1007/BF03024530
  10. K.H. Grote, E.K. Antonsson, Springer Handbook of Mechanical Engineering, Springer, 2009.
  11. G.F. Vander Voort, Metallography and microstructures of heat-resistant alloys, ASM Handbook 9 (2004) 824.
  12. I.S. Hwang, Embrittlement Mechanisms of Nickel-Base Alloys in Water, Ph.D. Thesis, Department of Nuclear Engineering, Massachusetts Institute of Technology, Cambridge Massachusetts, 1987.
  13. G. Petzow, Metallographic Etching: Metallographic and Ceramographic Methods for Revealing Microstructure, first ed., American Society for Metals, Geauga County, Ohio, 1978.
  14. Buehler Ltd, The Science behind Materials Preparation, A Guide to Materials Preparation & Analysis, " Buehler Ltd., Lake Bluff, Illinois, 2004, p. 76.
  15. ASTM, Standard Test Method for Measurement of Fatigue Crack Growth Rates, ASTM E647-08), West Conshohocken (PA), 2008.
  16. G.S. Was, R.G. Ballinger, Hydrogen induced cracking under cyclic loading of nickel base alloys used in PWR steam generator tubing, in: Fourth Semi-annual Progress Report, EPRI NP-4613, EPRI, Palo Alto, CA, 1980.
  17. J.W. Provan, Probabilistic Fracture Mechanics and Reliability, Martinus Nijhoff Publishers, 1991.
  18. A. Papoulis, Probability, Random Variables, and Stochastic Processes, second ed., McGraw-Hill, New York, 1984.
  19. ASTM, Standard test methods for determining average grain size, in: ASTM E112-96, West Conshohocken, PA, 2000, https://doi.org/10.1520/E0112-96R04.
  20. M.T. Miglin, H.A. Domian, Microstructure and stress corrosion resistance of alloys X750, 718, and A286 in light water reactor environments, J. Mater. Eng. 9 (No. 2) (1987) 113-132. https://doi.org/10.1007/BF02833701
  21. C.A. Grove, L.D. Petzold, Mechanism of SCC of alloy X750 in high purity water, J. Mater. Energy Syst. 7 (No. 2) (1985) 147-162. https://doi.org/10.1007/BF02833560
  22. A.J. Bard, L.R. Faulkner, Electrochemical Methods Fundamentals and Applications, second ed., John Wiley & Sons, INC., 2000.
  23. Denny A. Jones, Principles and Prevention of Corrosion, second ed., Prentice Hall, Upper Saddle River, NJ, 1996.
  24. R.P. Gangloff, Hydrogen assisted cracking of high strength alloys, in: I. Milne, R.O. Ritchie, B. Karihaloo, J. Petit, P. Scott (Eds.), Comprehensive Structural Integrity, vol. 6, Elsevier Science, New York, NY, 2003, pp. 31-101.
  25. J. Kameda, Equilibrium and growth characteristics of hydrogen-induced intergranular cracking in phosphorus-doped and high purity steels, Acta Metall. 34 (1986) 1721-1735. https://doi.org/10.1016/0001-6160(86)90119-7

Cited by

  1. Correlations between crack initiation and crack propagation lives of notched specimens under constant and variable amplitude loading vol.44, pp.10, 2021, https://doi.org/10.1111/ffe.13549