• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.1
• /
• pp.1-9
• /
• 2008

The Logistic cone is studied as a most desirable for the software testing effort. Assuming that the error detection rate to the amount of testing effort spent during the testing phase is proportional to the current error content, a software-reliability growth model is formulated by a nonhomogeneous Poisson process. Using this model the method of data analysis for software reliability measurement is developed. After defining a software reliability, This paper discusses the relations between testing time and reliability and between duration following failure fixing and reliability are studied SRGM in several literatures has used the exponential curve, Railleigh curve or Weibull cure as an amount of testing effort during software testing phase. However, it might not be appropriate to represent the consumption curve for testing effort by one of already proposed curves in some software development environments. Therefore, this paper shows that a logistic testing- effort function can be adequately expressed as a software development/testing effort curve and that it gives a good predictive capability based on real failure data.

• Transactions of Materials Processing
• /
• v.14 no.4 s.76
• /
• pp.384-391
• /
• 2005

The nickel-based alloy Nimonic 80A possesses the excellent strength, and the resistance against corrosion, creep and oxidation at high temperature. Its products are used in aerospace engineering, marine engineering and power generation, etc. Control of forging parameters such as strain, strain rate, temperature and holding time is important because change of the microstructure in hot working affects the mechanical properties. Change of the microstructure evolves by recovery, recrystallization and grain growth phenomena. The dynamic recrystallization evolution has been studied in the temperature range of $950\~1250^{\circ}C$ and strain rate range of $0.05\~5s^{-1}$ using hot compression tests. The metadynamic recrystallization and grain growth evolution has been studied in the temperature range of $950\~1250^{\circ}C$ and strain rate range $0.05,\;5s^{-1}$, holding time range of 5, 10, 100, 600 sec using hot compression tests. Modeling equations are proposed to represent the flow curve, recrystallized grain size, recrystallized fraction and grain growth phenomena by various tests. Parameters in modeling equations are expressed as a function of the Zener-Hollomon parameter. The modeling equation for grain growth is expressed as a function of the initial grain size and holding time. The modeling equations developed were combined with thermo-viscoplastic finite element modeling to predict the microstructure change evolution during hot forging process. The grain size predicted from FE simulation results is compared with results obtained in field product.

• Journal of Environmental Science International
• /
• v.22 no.12
• /
• pp.1571-1577
• /
• 2013

The effects of irradiance on the growth of toxic dinoflagellates Alexandrium tamarense (Masan Bay strain) and Alexandrium catenella (Jinhae Bay strain) were investigated in the laboratory. At $15^{\circ}C$ and 30 psu for A. tamarense and $25^{\circ}C$ and 30 psu for A. catenella, the irradiance-growth curve showed the maximum growth rate (${\mu}_{max}$) of 0.31 $day^{-1}$ with half-saturation photon flux density (PFD) ($K_I$) of 44.53 ${\mu}molm^{-2}s^{-1}$, and a compensation PFD ($I_c$) was 20.67 ${\mu}molm^{-2}s^{-1}$ for A. tamarense, and ${\mu}_{max}$ of 0.38 $day^{-1}$ with $K_I$ of 59.53 ${\mu}molm^{-2}s^{-1}$, and $I_c$ was 40.80 ${\mu}molm^{-2}s^{-1}$ for A. catenella. The $I_c$ equated to a depth of 8~9 m from March to June for A. tamarense and 6~7 m from March to June for A. catenella. These responses suggested that irradiance at the depth near the middle layer in Masan Bay would provide favorable conditions for two species.

• Journal of Animal Science and Technology
• /
• v.44 no.2
• /
• pp.165-170
• /
• 2002

Mature weight (A) and rate of maturing (k) estimated by nonlinear regression were studied to determine the optimum age range over which the estimate of growth curve parameters can be estimated. The weight-age data from 1,133 Hanwoo bulls at Hanwoo Improvement Center of N.A.C.F. were used to fit the growth curve using Gompertz model. All available weight data from birth to the specific age of months were used for the estimation of parameters: the six specific ages used were 12, 14, 16, 18, 20 22 and 24 months of age. The mean estimates of mature weight (A) were 966.5, 1,255.9, 1,126.2, 916.5, 842.2, 780.9 and 767.0kg for ages 12 through 24 months, respectively. The mean estimates of mature weight (A) to 22 and 24 months of age were not different from each other. However, they were different from the estimates based on the data to other ages. Mean estimates of rate of maturing (k) were 3.362, 3.595, 3.536, 3.421, 3.403, 3.409 and 3.411 for ages 12 through 24 months, respectively. The mean estimates of maturing rate (k) for ages 18 through 24 months of age were not significantly different from each other. However, they were different from the estimates based on the data to other ages. Correlations among estimates of A at various ages showed the highest value of 0.93 between 22 and 24 months. Correlations among estimates of k at various ages were highest ranging from 0.91 to 0.99 among 18 to 24 months. The correlations between A and k were positive and tended to decrease with the increase of the age from 0.84 for the age of 12 months to 0.10 for the age of 24 months. Thus, the estimates of growth curve parameters, A and k, suitable for genetic studies can be derived from accumulated Hanwoo bulls after 22 months of age.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.7 s.166
• /
• pp.1164-1172
• /
• 1999

In this study, to investigate the fatigue crack retardation behavior and the variability of retardation cycles, fatigue crack growth tests were conducted on 7075-T6 aluminum alloy under single tensile overload. A retardation coefficient, D was introduced to describe fatigue crack retardation behavior and a random variable, Z to describe the variability of fatigue crack growth. The retardation coefficient was separately formulated according to retardation behavior which is composed of delayed retardation part and retardation part. The random variable, Z was evaluated from experimental data which was obtained from fatigue crack growth tests under constant amplitude load. Using these variables, a probabilistic model was developed on the basis of the modified Forman's equation, and retardation behavior and cycles were predicted under certain overload condition. The predicted retardation curve well agrees with the trend of experimental crack retardation behavior. And this model well predicts the scatter of experimental retardation cycles.

• Korean Chemical Engineering Research
• /
• v.48 no.1
• /
• pp.58-67
• /
• 2010

Combustion of the Korean Anthracite and wood-pellet was characterized in air atmosphere with variation of heating rate(5, 10, 20 and $30^{\circ}C/min$) in TGA. The results of TGA have shown that the combustion of the wood-pellet occurred in the temperature range of $200{\sim}620^{\circ}C$ which is much lower than that of Korean anthracite. Activation energies of the wood-pellet and Korean anthracite, determined by using Friedman method were 44.12, 21.45 kcal/mol respectively. Also, their reaction orders(n) and pre-exponential factors(A) were 5.153, 0.7453 and $4.01{\times}10^{16}$, $1.39{\times}10^6(s^{-1})$ respectively. In order to find out the combustion mechanism of the wood-pellet and Korean anthracite, twelve solidstate mechanisms defined by Coats Redfern Method were tested. The solid state combustion mechanisms of the woodpellet and Korean anthracite were found to be sigmoidal curve A3 type and a deceleration curve F1 type respectively. Also, from iso-thermal combustion($300{\sim}900^{\circ}C$) of their char, the combustion characteristics of their char was found. Activation energies of the their char were 27.5, 51.2 kcal/mol respectively. Also, pre-exponential factors(A) were $2.55{\times}10^{12}$, $1.49{\times}10^{10}(s^{-1})$ respectively. Due to the high combustion reactivity of wood-pellet compared with Korean anthracite, combustion atmosphere will be improved by co-combustion with Korean anthracite and wood-pellet.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.3
• /
• pp.252-257
• /
• 2000

To investigate the thermal preheating effect of the GaAs substrate exerted on the ZnS epilayers for the first time, ZnS epilayers were grown on the GaAs (100) substrate by hot wall epitaxy. The thermal preheating temperature was $450^{\circ}C$~$660^{\circ}C$. The full width at half maximum values of double crystal rocking curve were the smallest for the ZnS epilayers grown on the GaAs thermally preheated at around both $500^{\circ}C$ and $600^{\circ}C$. However, photoluminescence characteristics of ZnS epilayers were better at $600^{\circ}C$ than at $500^{\circ}C$. Therefore, it was shown that the optimum preheating temperature of the GaAs substrate for the growth of high quality ZnS epilayer was around $600^{\circ}C$. From these experimental results, it was shown that the crystal quality and the PL properties of ZnS epilayers were enhanced for the GaAs substrates thermally preheated at $600^{\circ}C$.

• Magazine of the Korea Concrete Institute
• /
• v.7 no.6
• /
• pp.233-241
• /
• 1995

In this thesis, the fatigue tests were performed on a series of R /C beams repaired with co& crete-lmlyrner composites to investigate the fatigue bahavior. The three point loading system is used in the fatigue tests. In these tests, relations between the repeated loading cycles and mid-span deflections, number of repeated loading cycles when repaired beams were fractured, the bonding performance of repair materials were observed. On this basis, the mid-span deflections, the crack growth and failure mode of repaired R /C beams were studied. A S-N curve was drawn to present the fatigue strength of repaired beams. From the test results, it was shown that behavior of R /C beams repaired with polymer-cement series were very sirnillar to control beam about bonding performance, mid-span deflections and fatigue strength according to S-N curve drawn by the regression anlysis on the fatigue test results.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.43 no.6
• /
• pp.715-722
• /
• 2010

The effects of temperature, salinity and irradiance on the growth of the harmful red tide dinoflagellate Cochlodinium polykrikoides Margelef isolated from the South Sea of Korea were examined in the laboratory. Growth was examined under the following combinations of temperature and salinity: 15, 20, 25 and $30^{\circ}C$, and 15, 20, 25, 30 and 35 psu at a constant irradiance of $180\;{\mu}mol/m^2/s$. No growth was observed with a temperature of $15^{\circ}C$ and a salinitiy of 15 psu. Moderate growth rates of more than 0.30 /day were obtained at $25^{\circ}C$ with salinities of 25.35 psu. These values are similar to in situ observations for this species. The maximum growth rate, 0.35 /day, was obtained at $25^{\circ}C$ and 30 psu. In light experiments, cell growth of C. polykrikoides was conducted with constant temperature ($20^{\circ}C$) and salinity (30 psu) under light photon flux densities (PFD) of 10, 25, 50, 70, 100, 150, 250 and $350\;{\mu}mol/m^2/s$. C. polykrikoides did not grow at $10\;{\mu}mol/m^2/s$. Cell growth was observed at irradiance values of $25\;{\mu}mol/m^2/s$ and above. The irradiance-growth curve was described as ${\mu}=0.30{\cdot}(I-15.27)/(I+27.22)$, (r=0.99). This suggests a compensation PFD of $15.27\;{\mu}mol/m^2/s$ and a maximum growth rate of 0.30 /day. In conclusion, C. polykrikoides prefers high salinity, temperature and irradiance in summer in Korea. These results provide important information for understanding the mechanism of C. polykrikoides blooms and developing technology to predict blooms of this organism in the field.

• Korean Journal of Remote Sensing
• /
• v.37 no.4
• /
• pp.733-745
• /
• 2021

Although waxy corn varieties developed after the 1980s show differences depending on development stages and conditions, studies on the characteristics of waxy corn during the growth stage are rare. The subject of this study was a field survey and unmanned aerial vehicle (UAV) image acquisition of four waxy corn varieties cultivated in Idam-ri, Gammul-myeon, Goesan-gun, Korea. The study was conducted in four stages at intervals of two weeks after planting in 2019. The growth characteristics of each of the four varieties were analyzed using growth curves obtained based on field survey and UAV imagery data. The characteristics of each growth stage of the four varieties of corn, as assessed using normalized difference vegetation index (NDVI) and plant height (P.H.) values, were as follows. The growth model was identified as a model in which three-parameter logistic (3PL) curves reflect the growth characteristics of corn well. In particular, it was found that the variations in growth rate shown by P.H. and NDVI values clearly explain the differences between corn varieties. Among the four cultivars, growth and development first occurred at the early vegetative stage in Daehakchal, followed by Mibaek 2, Miheukchal, and finally Hwanggeummatchal. The variationsin P.H. and NDVI were achieved quickly and earlier in Daehakchal, followed by Mibaek 2, Hwanggeummatchal, and Miheukchal. It was confirmed that these results reflected the characteristics of the fast white-type varieties, while the black-type varieties were delayed, as in a previous study. These results reflect the resistance to lodging that affects the cultivation environment and the response characteristics to nutrients and moisture. It was confirmed that UAV accurately provides growth information that is very useful for analyzing the growth characteristics of each corn variety.