• Journal of The Korean Society of Grassland and Forage Science
• /
• v.8 no.1
• /
• pp.26-32
• /
• 1988

This study was conducted to determine the effects of cutting frequency and cutting height on agronomic characteristics and yield performance of sorghum-sudangrass hybrid, cv. Pioneer 855 F on the experimental field of Livestock Experiment Station, Suweon. The results are summarized as follows: 1. The relative contribution of leaf component to total yield was higher when the plants were cut frequently rather than when defoliated only a few times, and tend to be higher with high cutting. 2. Leaf Area Index (LAI) was the highest at the primary growth of two cutting times scheme and the first regrowth for three or four cutting times a year, but LAI, in general, was not related to cutting height. 3. Crop Growth Rate was the heighest at the first regrowth-plants grown in summer, and it was also related to the amount of stubble left at the previous cut. 4. Dead stubbles were not occurred when plants were cut before heading, but those were accompanied by the frequent and low cutting. 5. Total fresh fodder and dry matter yield were the highest at two times cut a year, and decreased with frequent cutting. The optimum cutting height at two times cut was ca. lOCm height stubble from the ground level, but yield increased with higher level cutting at the three or four times cut a year.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.4
• /
• pp.701-709
• /
• 2005

An efficient method of selecting an antagonistic strain for use as a biological control agent strain was developed. In this improved method, the surface tension reduction potential of an isolate was included in the 'decision factor,' in addition to two other factors; the growth rate and pathogen inhibition. By using a statistically designed method, an isolate from the soil was selected and identified as Bacillus sp. GB 16. In the pot test, this strain showed the best performance among the isolated strains. The lowest disease incidence rate and fastest seed growth were observed when the Bacillus sp. GB 16 was used. The action of the surface tension reducing component was assumed to enhance the wetting, spreading, and residing of the antagonistic strain in the rhizosphere. This result showed that the improved selection method was quite effective in selecting the best antagonistic strain for the biological control of soilborne infectious plant pathogens.

• The Journal of the Korea Contents Association
• /
• v.16 no.12
• /
• pp.300-309
• /
• 2016

The beauty industry relies heavier upon the specialized labor of beauty industry employees than any other industry. Beauty industry employees directly meet their clients and are required to provide services with extremely delicate care. The sense of happiness of employees working at the interface of service provision matters most importantly for beauty industry growth. In this study, the correlation among beauty industry employees' resilience, happiness index and job satisfaction was tested under hypotheses. As a result, their resilience was found to have a significant effect on happiness index and job satisfaction; happiness index, on job satisfaction and resilience; and job satisfaction, on resilience and happiness index. Consequentially, it was found that when individual happiness increased, their job satisfaction moved up along with job performance. In this sense, for the further development of beauty industry, it is deemed necessary to consider methods to improve the sense of happiness of beauty industry employees.

• Korean Journal of Agricultural Science
• /
• v.42 no.3
• /
• pp.253-259
• /
• 2015

This study was conducted to investigate the effect of different additives on the growth performance, feed efficiency and carcass characteristics in Holstein steers during 18month fattening periods. Twenty four Holstein steers, 5months of age and 176.6kg, were randomly allocated to 3 experimental groups 8 animals each for 18-months feeding trial. The groups were control (not additive), T1 (fed zinc, Vitamin C) and T2 (fed zinc, Vitamin C, Vitamin B6 and Selenium). According to feeding additives, final weight was not significantly different among the treatment groups, tended to be high at T2 group (827kg) compared to the other groups. Average daily gain was not different among the treatment groups during the experimental periods, but T2 group was significantly greater than T1 group in growing stage (p<0.05). The feed additives had no effects on DMI during experimental periods. Feed conversion ratio of T1 group in growing stage was significantly higher than those of other groups (p<0.05), average feed conversion ratio was tend to be decreased at T2 group rather compared with other groups. In the results of yield traits, carcass weight were relatively higher in T2 group than other groups (p<0.05). Rib-eye area, back fat thickness and yield index were similar between groups. In quality traits, marbling, meat color, fat color, texture and maturity were not significantly different among the groups. In economic efficiency, income was highest at T2 group as 91~393 thousand won among 3 groups.

• Fisheries and Aquatic Sciences
• /
• v.19 no.10
• /
• pp.44.1-44.8
• /
• 2016

Rockfish, Sebastes schlegelii (mean length $14.53{\pm}1.14cm$ and mean weight $38.36{\pm}3.45g$), were exposed for 4 weeks with the different levels of ammonia in the concentrations of 0, 0.1, 0.5, and 1.0 mg/L at 19 and $24^{\circ}C$. The indicators of growth performance such as daily length gain, daily weight gain, condition factor, and hematosomatic index were significantly reduced by the ammonia exposure and high temperature. The ammonia exposure induced a significant decrease in hematological parameters, such as red blood cell (RBC) count, white blood cell (WBC) count, hemoglobin (Hb), and hematocrit (Ht), whose trend was more remarkable at $24^{\circ}C$. Mean corpuscular volume (MCV), mean corpuscular hemoglobin (MCH), and mean corpuscular hemoglobin concentration (MCHC) were also notably decreased by the ammonia exposure. Blood ammonia concentration was considerably increased by the ammonia concentration exposure. In the serum components, the glucose, glutamic oxalate transaminase (GOT), and glutamic pyruvate transaminase (GPT) were substantially increased by the ammonia exposure, whereas total protein was significantly decreased. But, the calcium and magnesium were not considerably changed.

• Animal Bioscience
• /
• v.36 no.3
• /
• pp.471-483
• /
• 2023

Objective: This study was conducted to evaluate the interactive effects of dietary digestible tryptophan (dTry) and soy oligosaccharides (SO) on growth performance, caecal skatole level, and microflora of broiler chickens aged from 14 to 42 days. Methods: Three hundred and sixty broiler chicks were allocated equally to 36 cages at 14-day-of-age according to body weight and gender. Using a 3×2 factorial arrangement, 3 dietary dTry levels (0.18%, 0.23%, and 0.28%) supplemented with 0 or 3.5 g/kg of SO were used to create 6 diets (treatments). Each diet was fed to six replicates of 10 birds (60 birds/treatment), growth performance was measured. Caecal content samples were collected at 42 days of age. Results: Results showed that significantly different dTry level×SO interactions were found for average daily gain (ADG), caecal levels of indole, propionic acid, and butyric acid, and microbial Shannon index (p<0.05). Birds fed diet containing 0.23% dTry level with SO supplementation had higher ADG and lower feed/gain ratio than those fed the other diets (p<0.05). Broilers fed diets containing 0.28% dTry increased their caecal levels of indole and skatole compared with those containing 0.18% or 0.23% dTry (p<0.01), regardless of SO addition. SO supplementation to diets decreased the caecal skatole level by 16.17% (p<0.05), and increased the relative frequency of Clostridium IV (p<0.05), regardless of dietary dTry level. Conclusion: These results indicated that diets containing 0.23% dTry with SO supplementation positively promoted ADG, and decreased caecal skatole levels of broiler chickens. The dietary dTry level, SO affected the caecal skatole level, however, there was no interaction between them.

• Fire Science and Engineering
• /
• v.33 no.4
• /
• pp.16-27
• /
• 2019

A burning test was conducted on the smoke and combustion gases generated from cypress wood treated with sodium silicate, 3-aminopropyltrimethoxysilane sol, 3-(2-aminoethylamino)propylmethyldimethoxysilane sol, and 3-(2-aminoethylamino) propyltrimethoxysilane sol. The silicone compound sol was applied to each of the cypress wood specimens three times with a brush. The smoke and combustion generation gas were analyzed using a cone calorimeter (ISO 5660-1) and the smoke was also evaluated by applying new smoke risk assessment method. The smoke performance index (SPI) of the cypress treated with silicone compound increased 1.66 to 8.42 times and the smoke growth index (SGI) was 11.8 to 88.2%, respectively. The smoke intensity (SI) is expected to be 1.0~50.5% lower than that of the base specimens, resulting in lower smoke and fire hazards. The third maximum carbon monoxide (CO_peak) concentration of the specimens treated with silicone compounds was 22.5~33.3% lower than that of the base specimens. On the other hand, it produced potentially fatal toxicity that was 1.48~1.72 times higher than the US Occupational Safety and Health Administration (OSHA) acceptance standard (PEL). Cypress wood itself produced a high carbon monoxide concentration, but the silicon compound played a role in reducing this level.

• Fire Science and Engineering
• /
• v.33 no.2
• /
• pp.9-19
• /
• 2019

Experiments on the combustion characteristics of untreated wood specimens and those treated with four types of silicone compounds were carried out using a cone calorimeter according to the ISO 5660-1 standard. 3-Aminopropyltrimethoxysilane (APTMS), 3-(2-aminoethylamino) propylmethyldimethoxysilane (AEAPMDMS), and 3-(2-aminoethylamino) propyltrimethoxysilane (AEAPTMS) were used as the silane compounds. The flame retardants were synthesized with sodium silicate and amino silane compounds. The measured time to ignition after combustion at an external heat flux of $50kW/m^2$ was 9 s to 11 s. Time to ignition was marked with a delayed value in the 3 s to 5 s range. The peak heat release rate ($HRR_{peak}$) was reduced by 5 to 20% compared with the uncoated specimen, and AEAPMDMS showed the highest initial fire risk. The total heat release (THR) was decreased by 1 to 22%. Compared to the untreated specimen, the fire performance index (FPI) of the specimens coated with silicone sol compounds increased by 1.5 to 2.2 fold. The fire growth index (FGI) of the AEAPMDMS specimen was increased by 30% and the others were decreased by 93 to 94%. Therefore, the fire risk of wood coated with silicone compounds was improved in terms of the heat risk properties.

• Applied Chemistry for Engineering
• /
• v.29 no.6
• /
• pp.670-676
• /
• 2018

Experiments on combustion gases generation of untreated cypress specimens or treated with boric acid, ammonium pentaborate, and boric acid/ammonium pentaborate additive were carried out. Test specimens were painted three times with 15 wt% boron compound aqueous solutions. After drying, the generation of combustion gas was analyzed using a cone calorimeter (ISO 5660-1). As a result, comparing to untreated specimen, the smoke performance index (SPI) of the specimens treated with the boron compound increased by 1.37 to 2.68 times and the smoke growth index (SGI) decreased by 29.4 to 52.9%. The smoke intensity (SI) of the specimens treated with boron compounds is expected to be 1.16 to 3.92 times lower than that of untreated specimens, resulting in lower smoke and fire hazards. Also, the maximum carbon monoxide ($CO_{peak}$) concentration of specimens treated with boron compounds was 12.7 to 30.9% lower than that of untreated specimens. However, it was measured to produce fatal toxicities from 1.52 to 1.92 times higher than that of permissible exposure limits (PEL) by Occupational Safety and Health Administration (OSHA). The boron compounds played a role in reducing carbon monoxide, but it did not meet the expectation of reduction effect because of the high concentration of carbon monoxide in cypress itself.

• Fire Science and Engineering
• /
• v.33 no.1
• /
• pp.69-75
• /
• 2019

In this study, the combustibility of five types of plastic plates, fiber reinforced plastic (FRP), polystyrene (PS), polycarbonate (PC), polypropylene (PP), and polyvinyl chloride (PVC), were tested using a cone calorimeter (ISO 5660). The PVC plate showed a $44.65kW/m^2$ lower peak heat release rate (HRR) and a $30.97kW/m^2$ lower maximum average rate of heat emission than the other four types of plastics, whereas the PS plate showed a $773.44kW/m^2$ higher peak HRR and $399.14kW/m^2$ higher maximum average rate of heat emission. The PC plate and PS plate showed the highest HRR by a maximum of 3.88 times in $CO_{mean}$ yields, while the PS pate and PP plate showed the highest HRR by a maximum 4.88 times in $CO_{2mean}$ yields. In addition, the smoke performance index (SPI) of the PS plate decreased by 74.81%~95.99%; the smoke growth index (SGI) increased to 76%~300%; the smoke intensity (SI) also increased to 917.73% ~ 9607.57%, and the danger of smoke increased. The PS plate was found to have the highest risk of life damage due to smoke on the thermal and smoke sides.