• Proceedings of the Ginseng society Conference
• /
• 1987.06a
• /
• pp.89-107
• /
• 1987

For the elucidation of significance of saponin as quality criterion of ginseng ginsenoside content(GC) and ginsenoside pattern similarity(GPS) by simple correlation were investigated in relation to red ginseng quality factors, age, plant part, harvest season, mineral nutrition, soil physical characteristics, growth light and temperature, shading material, growth location, physiological disease and crop stand through survey of ginseng plantstions, field experiments, water culture and phytotron experiments. Effect of tissue culture was also reviewed. GC was negatively correlated with good quality of red ·ginseng and positively with bad quality. Age did not show any consistency with GC but GPS was less with the increase of age difference. GPS was less or not significant between taproot that is lowest in GC and epidermis highest, and significant between leaf and taproot. Harvest season marked with the lowest GC and Pattern was also different. Nutrient imbalance, the increase of hazardous soil nutrient and physical condition to growth increased GC, but GPS was little different. The higher the growth lights intensity and temperature the higher the GC but GPS was little changed. Root rust increased GC, but root scab decreased it. Sponge-like and inside cavity phenomena increased GC. Ginsenoside pattern of cultured tissues and rootlet showed great variation. These results strongly indicate that there are optimum saponin content and ginsenoside pattern and that these are accomplished under the optimum growth condition.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.25 no.4
• /
• pp.91-98
• /
• 1980

Three kinds of shading materials, styrol-foam board, pine board and polytex, were examined and compared with ordinary shading, and the effects of light intensity and the temperature under the shadings on the photosynthesis and the root growth of the Korean ginseng were studied to improve the shading on the ginseng field. The amounts of photosynthesis of the ginseng leaves at 2$0^{\circ}C$ were significantly larger than those at 3$0^{\circ}C$ in the same light intensity. At 2$0^{\circ}C$, the maximum photosynthesis occured at 35, 000 lux, but at 3$0^{\circ}C$, the amount of photosynthesis was rapidly reduced by higher light intensity over 26, 200 lux. The best root growth occurred under the polytex shading and the styrol-foam board shading was also effective for ginseng growth. Under the ordinary shading, the root growth of ginseng planted on rear line was very poor but under the styrol-foam or the polytex shading, the root growth showed little difference between the ginsengs planted on rear line and front line.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.195-195
• /
• 2017

The water in the crop cultivation shows difference according to the variety of crop, cultivations period and climatic condition. The growth and development, quantity and fruit enlargements are affected by soil water conditions. In previous study, leaf area and photosynthesis are decreased by lower soil moisture. Other research reported that excess moisture condition at vegetative and reproductive growth period in cultivation of soybean caused highest reduction in crop growth rate (CGR) and dry weights of plant parts. In particular, the damage was bigger during vegetative growth stage than reproductive growth period. Soybean (Glycine max (L.) Merill) is useful and popular crop throughout the world. It is very popular crop in Korea, China, Japan and other Asian countries. Soybeans used in various way including soybean sprouts, paste, soymilk, oil and tofu. Two soybean cultivars grown in four different irrigation conditions were determined for physiological responses. In this study, we examined leaf area (LA), leaf dry weight (LDW), specific leaf area (SLA), root dry weight (RDW) and shoot height (SH) in different water conditions. 50mL/9day irrigation periods showed the lowest contents in LA, LDW, RDW, SH. Water deficit caused increase of leaf Water saturation deficits (WSD), Cheongjakong 3 and Taekwangkong showed increase of leaf water saturation deficits (WSD) in drought conditions and leaf water potential and stomatal conductance were decreased. Photochemical efficiency was decreased in 50mL/1day irrigation condition while, there was decrease of growth and development in 50mL/9day with drought.

• Korean Journal of Soil Science and Fertilizer
• /
• v.36 no.2
• /
• pp.86-91
• /
• 2003

Carbon material such as graphite and activated charcoal can promote the growth of some formsog bacteria. We examined whether this bacterial growth promoting effect can have a positive influence on field crops. Refined graphite was mixed into the standard soil used in rice cultivation. Varying soil graphite mixtures of 0.1%, 0.5% and 1% were used to cultivate rice seedling for 3 weeks. After transplanting in the filed, rice plants were cultivated for 4 months. To observe the effect of graphite(carbon material) during the cultivation of rice, we examined various different growth components in this research. During the transplanting stage, growth promoting effect of carbon was observed in the 0.1% carbon added soil. However, there were not much difference between graphite added soil and standard soil in the other stages. Rice yield was highest in the soil with 0.1% graphite.

• Korean Journal of Materials Research
• /
• v.9 no.5
• /
• pp.538-543
• /
• 1999

The theory of the reflow applied to metallization process was studied, and the factors affecting the reflow and the relation between the reflow and the grain growth were investigated. The driving force for the metal reflow is the difference in chemical potentials along the metal surface, and it causes the atom movement. On condition that metal interconnect is fabricated for semiconductor devices, surface diffusion is the primary atom movement mechanism. The metal reflow is influenced by reflow temperature, reflow time, reflow ambient, thin film thickness, thin film material, underlayer material, pattern size, and aspect ratio. It is supposed that the reflow characteristic varies according to the grain growth during the reflow, so the effect of the grain growth on the reflow should be considered.

• Korean Journal of Animal Reproduction
• /
• v.22 no.1
• /
• pp.81-87
• /
• 1998

This experiment was carried out with 12 Korean native heifers(8~12month old, body weight, 160~240kg) raised at a farm of Chang-Soo Livestock Cooperatives to evaluate the effects of rGH(recombinant growth hormone) on serum concentrations of growth hormone, estrogen, and IGF-I, weight gain, teat volume gain and processing enzyme activity of IGF-I, binding protein III at 28 day intervals. Animals used were injected with 250mg rGH at 14 day intervals from December to Ferbruary in 1994. The significant difference was found in the group of treatment on the 4th week in the endogenous GH(p<.01) and 8th week in estrogen and IGF-I(p<.05) after injectin of rGH in Korean native heifers. There were significant differences between control group and treatment group in weight and teat volume on 8th week after treatment(p<.05). Processing enzyme activity before injection of rGH were low. However, heifers injected with 250mg of rGH showed that processing enzyme activity of IGF binding protein was highly increased throughout the experiment. Present results suggest that injection of exogenous rGH to heifers can increase the growth performance and udder development of Korean native heifers by the endogenous hormonal changes.

• Journal of Welding and Joining
• /
• v.20 no.5
• /
• pp.78-86
• /
• 2002

A metallurgical model for the prediction of prior austenite grain size considering the dissolution kinetics of M$_3$C precipitates at the heat affected zone of SA508-cl.3 was proposed. The isothermal kinetics of grain growth and dissolution were respectively described by well-known equation, $dD/dT=M({\Delta}F_{eff})^M$ and Whelan's analytical model. The isothermal grain growth experiments were carried out for measure the kinetic parameters of grain growth. The precipitates of the base metal and the specimens exposed to thermal cycle were examined by TEM-carbon extraction replica method. The model was assessed by the comparison of BUE simulation experiments and showed good consistencies. However, there was no difference between the model considering and ignoring $M_3C$ precipitates. It seems considered that pinning force exerted by $M_3C$ Precipitates was lower than driving force for grain growth due to large size and small fraction of precipitates, and mobility of grain boundary was low in the lower temperature range.

• Korean Journal of Veterinary Research
• /
• v.26 no.2
• /
• pp.265-276
• /
• 1986

The bovine serum factor influencing the growth of swine testicle (ST) cell and the END effect of hog cholera SN test was studied. Throughout the experimental studies. following results were obtained and summarized. 1. Bovine whole serum of 16(76.2%) and 4(19.0%) samples out of 21 have shown a positive ST cell growth and the END effect, respectively. However, all of 21(100%) and 8(38.1%) samples out of 21 serum supernatant fractions, prepared from the bovine whole serum, have shown positive ST cell growth and END effect, respectively. 2. In the SDS-polyacrylamide gel electrophoretic analysis of the bovine whole serum and the supernatant fractions, ST cell growth inhibiting factor was proved present in globulin fraction and in whole gel plate as a diffusible component. 3. The END ineffective component present in the whole serum and its supernatant fraction was proved to be BVDV neutralizing antibody. 4. The difference of osmolarity, optical density, pH, degree of precipitant formation following heat cold treatment, A/G ratio as we11 as electrophoretic pattern and NDV SN index of the samples were not correlated to the degree of 57 cell growth and to the END effectiveness.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.16 no.1
• /
• pp.43-48
• /
• 2006

In this Part 2, the grain growth processes of $Al_2O_3$ ceramics is numerically simulated using Monte Carlo method (MCM) and finite element method (FEM) and the pore sizes are analyzed. As the green ceramics whose thermal conductivities in high temperatures are generally low are sintered by the plasma heat and are rapidly cooled, the grain growth of the sintered body in the center is different from that in the outer. Also, even in the same sintering temperature, the pore size differs according to the pressing pressure. In order to prove the difference, the temperature distribution of the sintered body was analyzed using the finite element method and then the grain growth process associated with pressing pressures and relative densities was simulated using Monte Carlo method.

• Korean Journal of Soil Science and Fertilizer
• /
• v.50 no.5
• /
• pp.409-421
• /
• 2017

Recently Unmanned Aerial Vehicle (UAV) technology offers new opportunities for assessing crop growth condition using UAV imagery. The objective of this study was to select optimal vegetation indices and regression model for estimating of rice growth using UAV images. This study was conducted using a fixed-wing UAV (Model : Ebee) with Cannon S110 and Cannon IXUS camera during farming season in 2016 on the experiment field of National Institute of Crop Science. Before heading stage of rice, there were strong relationships between rice growth parameters (plant height, dry weight and LAI (Leaf Area Index)) and NDVI (Normalized Difference Vegetation Index) using natural exponential function ($R{\geq}0.97$). After heading stage, there were strong relationships between rice dry weight and NDVI, gNDVI (green NDVI), RVI (Ratio Vegetation Index), CI-G (Chlorophyll Index-Green) using quadratic function ($R{\leq}-0.98$). There were no apparent relationships between rice growth parameters and vegetation indices using only Red-Green-Blue band images.