• 한국가정과교육학회지
• /
• 제18권3호
• /
• pp.1-22
• /
• 2006

본 연구는 중학교 가정교과를 이수한 고등학생 학부모들을 대상으로 가정교과에 대한 인식 및 요구도를 조사하여 가정교과의 바람직한 운영 방안 모색의 기초자료를 제공하는 데에 목적이 있다. 본 연구에서 얻어진 결과를 요약하면 다음과 같다. 1. 가정교과의 교육목표는 건전한 생활 이념과 올바른 인간 형성에 관한 것으로 남녀 학생이 같이 배운다. 23.9%와 여자, 남자가 배워야할 교양과 지식을 배운다. 27.8%가 높게 나타났고, 가정 생활 향상을 위한 과학적 지식과 원리를 배운다라는 목표에 대해서 15.7%로 가장 낮게 나타났다. 2. 가정교과의 성격에 대한 인식도는 실생활과 관련성 인식도 3.84, 내용의 현실성 3.44로 나타났고, 편제에 대해서는 가정영역 시수의 적절성 2.31, 교육내용의 적합성 수준 3.38이었으며, 지도내용에 대해서는 활동을 통한 실천성 3.42, 생활에 대한 적용성 3.65, 흥미와 관심도 3.25, 적성 및 능력 개발 3.19 등이었다. 특히 시수의 적절성 인식이 가장 낮게 나타나 시수의 증가를 바라는 것으로 해석된다. 3. 가정교과의 내용에서 강화하여야 할 단원은 [가족] 4.38이 가장 높게 나타났고 [생활자원 환경관리 소비생활] 4.17, [식생활] 4.06, [주거생활] 3.79, [의생활] 3.64 순이었다. 실습의 문제점으로는 시간 부족 3.90, 시설 설비부족 3.89, 비용의 부담 3.48, 학생들의 흥미도와 실습능력의 부족 3.15로 나타났고, 교사의 지도 능력 부족도 2.83 으로 중간보다 높았다. 그리고, 가정교과 내용이 개정되어야 할 영역은 [가족] 4.18, [생활자원 환경관리 소비생활] 4.02, [식생활] 3.90, [주거생활] 3.78, [의생활] 3.66 순이었다. 4. 1학년 가정교과 내용의 요구도 평균은 3.70-4.11 범위이며 전체 평균 4.01로 매우 높게 나타났다. 학부모 전체의 중단원 요구도는 [우리들의 성장발달]이 4.11로 가장 높았고, [건강한 가족] 4.10, [성과 이성교제] 4.09, [청소년의 영양]과 [청소년의 식사] 4.04 순으로 매우 필요하다고 나타났으며 [조리의 기초와 실제]는 3.70으로 가장 낮았다. 이 중 여학생의 학부모는 [성과 이성교제]가 4.05로 가장 높게 나타났고, 남학생 학부모는 [건강한 가족] 4.24로 가장 높은 특성을 보였다. 5. 2학년 가정교과 내용의 요구도 평균은 3.12-4.09 범위이며 전체 평균 3.56으로 높게 나타났다. 학부모 전체의 중단원 요구도는 [청소년과 소비 생활]이 4.09로 가장 높았으며 [청소년의 일과 시간] 3.84, [자원과 환경] 3.68 순이었으며 [옷 만들기와 재활용]은 3.12로 가장 낮았다. 이 중 여학생 학부모는 [청소년과 소비 생활]이 3.96으로 가장 높게 나타났고, 남학생 학부모는 [청소년과 소비 생활]이 4.22로 가장 높은 특성을 나타냈다. 6. 3학년 가정교과 내용의 요구도 평균은 3.65-4.16의 범위이며 평균 3.76으로 약간 높게 나타났다. 학부모 전체의 중단원 요구도는 [진로의 선택과 직업 윤리] 4.16으로 가장 높게 나타났으며 [실내 환경과 설비] 3.89, [생활 공간의 활용] 3.72, [상차림과 식사 예절] 3.71 순으로 나타났으며, [식사 준비와 평가]는 3.53으로 가장 낮았다. 이 중 여학생 학부모는 [진로의 선택과 직업윤리]가 4.06으로 가장 높았고, 남학생 학부모는 [진로의 선택과 직업 윤리] 4.26으로 가장 높은 특성을 나타냈다. 본 연구 결과로 가정교과의 시수를 증가시켜야 하고 실험 시설의 확충이 필요하다는 것을 알 수 있었다. 또한 교사의 연수를 확대 실시하여 교육의 질을 높이고, 교과의 전문성을 가진 기술 및 가정교사가 Team Teaching을 하는 수업 방법의 도입 및 정착이 요구되며 교과내용에서는 [가족]과, [소비 생활], [진로교육]의 내용이 강조되는 방향으로 개정되어야 할 것이다.

• 만화애니메이션 연구
• /
• 통권39호
• /
• pp.215-231
• /
• 2015

중국 애니메이션의 역사에서 문화대혁명은 초기 애니메이션의 발전을 저해하고 이후 중국 애니메이션의 성장이 저조해지는 데 원인을 제공한 계기로서 부정적으로 평가된다. 따라서 이 시기 애니메이션 작품들은 학술 연구의 대상으로 분석되거나 연구되는 일이 거의 없이 일률적으로 평가절하되었다. 그러나 모든 문화예술의 창작은 특정한 역사적 조건 속에서 발전하며 그 나름의 미학적 성과를 지닌다. 본고는 문화대혁명 시기의 문화예술 창작을 주도했던 미학 원칙들을 고찰하고 해당 시기의 중국 애니메이션이 거둔 성과를 객관적인 관점에서 파악하려는 데 일차적인 목적을 둔다. 문화대혁명은 무산계급의 문화를 부각시킨다는 마오쩌둥의 사회주의 이데올로기에 따라 이전 시기까지의 문화예술을 지양하고 새로운 계급 문화를 창조하는 데 목적을 두었다. 따라서 이 시기의 문화예술 창작은 우리가 일반적으로 수용하는 미학 원칙과 어긋나는 부분이 많으며 비문자적이고 반엘리트적인 특성을 지닌다. 모범극은 문화대혁명 시기 문화예술의 미학 원칙을 모범적으로 구현한 창작물로 손꼽히며 문화대혁명 시기의 중국 애니메이션이 지향했던 미학 원칙들을 이해하는 데 참조가 된다. 본고는 삼돌출(三突出), 홍광량(紅光亮), 고대전(高大全)이라는 문화대혁명 시기의 미학 원칙이 구체적인 작품 속에서 어떻게 반영되고 있는지, 문화대혁명 시기 애니메이션은 이러한 미학 원칙을 어떻게 수용하고 나름의 방식으로 적응했는지 확인하기 위해 모범극과 문화대혁명 시기 중국 애니메이션의 상관관계에 대해 비교 연구하는 데 중점을 두었다. 먼저 모범극과 중국 애니메이션의 유사성을 중심으로 문화대혁명 시기의 미학 원칙이 작품 속에서 어떻게 구현되고 있는지 분석한 뒤, 분석 내용에 따라 이러한 미학 원칙이 중국 애니메이션의 창작에 끼친 긍정적인 영향과 부정적인 영향을 중립적으로 서술하였다. 구체적인 분석과 비교 고찰 과정에서는 크게 캐릭터와 장면 연출의 두 가지 측면에서 접근을 시도하였다. 캐릭터의 측면에서 문화대혁명 시기의 중국 애니메이션은 어린 소년, 소녀를 주인공으로 내세워 바람직한 공농병(工農兵) 형상을 부각시키기 위해 붉은 입술과 홍조를 띤 뺨을 강조해 건강함을 강조하고, 매끈한 질감과 정교한 터치로 반짝이는 느낌을 강조하며, 깔끔하고 선명한 색채로 빛나는 색감을 강조하는 '홍광량'의 원칙을 구현하는 데 치중하였음을 확인할 수 있었다. 장면 연출의 측면에서 문화대혁명 시기의 애니메이션은 소수의 안타고니스트에 비해 다수의 프로타고니스트를 강조하고, 다수의 프로타고니스트 가운데서도 뛰어난 영웅 인물들을 강조하며, 또 뛰어난 영웅 인물들 가운데서도 주요한 영웅 인물을 강조하는 '삼돌출'의 단계별 연출 방식을 사용하였다. 또한 영웅 인물은 일반적으로 로우앵글로 찍음으로써 높고 크고 완벽한 모습으로 연출해 '고대전'의 미학 원칙을 충실히 구현하고자 하였다.

• 지능정보연구
• /
• 제19권1호
• /
• pp.35-55
• /
• 2013

최근 기업 경영에 있어 정보기술의 도입 및 전략적인 활용은 선택이 아닌 필수로 자리잡고 있다. 기업의 전략적인 목표와 정보기술 간의 상호 의존은 기업의 생존 및 성장에 중요한 역할을 하고 있으며, 이에 따라 이미 많은 기업이 지속적으로 정보기술에 투자하고 있다. 정보기술 투자 성과 관련해서는 기업 내부의 요인들과 전략들, 기업외부의 고객까지 여러 가지 복합적인 요소들이 서로 상호작용하고 있기 때문에, 각 요인들을 독립적으로 분리하여 정보기술 투자 성과에 미치는 영향력을 분석하는 것이 쉽지 않다. 이에 본 연구는 기존의 연구들을 바탕으로 정보기술 투자성과에 영향을 줄 수 있는 변수들을 도출하여, 각 변수들의 관계를 수리적인 모델링을 통해 단순화시키고, 시뮬레이션 방법론을 이용하여 각 변수들의 변화에 정보기술 투자 성과는 어떻게 달라지는지를 밝혔다. 본 연구의 결과는 정보기술 투자는 서비스의 품질을 증가시켜 경제학적인 성과들에 간접적으로 영향을 주고, 정보기술 투자와 동시에 소비자 잉여는 증가되지만, 큰 투자비용으로 회사의 이익은 감소하게 된다. 그리고 시간이 지남에 따라 품질 증가에 관한 정보가 고객들 사이에 퍼져 나가게 되므로 최종적으로 기업의 수익을 증가시켜준다. 또한, 정보기술 투자 성과 극대화를 위해서는 회사가 제공하는 서비스와 소비자들의 네트워크 효과 등이 고려되어 정보기술 투자 여부를 결정하고, 회사에 맞는 정보기술 투자 전략을 세워야 함을 시뮬레이션 모형을 통해 확인할 수 있었다. 구체적으로, 한 번에 많은 투자를 할 경우는 단기적인 성과는 클 것으로 기대되나, 장기적으로 좋은 성과가 이뤄지지 않는다. 그러나 정보의 확산 속도가 빠르거나 정보의 장벽이 될 수 있는 정보를 받지 못하는 소비자가 적을 경우 단기에 집중 투자 하는 것이 많은 수요를 얻을 수 있다. 또, 여러 번에 걸쳐 투자하는 경우는 적당한 주기를 가지게 될 경우 장기적으로 큰 성과를 낼 수 있음을 확인할 수 있었다. 본 연구는 경제학 모델링과 시뮬레이션을 결합시켜, 각각의 한계를 모두 극복할 수 있는 방법론을 활용했다는 측면과, 정보기술 투자의 성과를 제품 품질의 매개 효과 모형에 적용하여 정보기술 투자와 기업 성과간의 관계를 보여주었다는 측면, 마지막으로 정보기술 투자 전략 및 정보의 확산 효과를 반영하여 정보기술 투자의 성과를 확인할 수 있다는 측면에서 의의가 있다.

• 지능정보연구
• /
• 제25권1호
• /
• pp.179-196
• /
• 2019

최근의 '똑똑한 소비자(Smart Consumer)'라 불리는 소비자가 많아지고 있는데, 이들은 제조사나 광고를 통해 전달되는 정보에 의존하지 않고, 기존 사용자나 전문가들의 후기, 여러 과학 지식을 획득하여 제품에 대한 이해를 높이고, 본인 스스로가 직접 판단하여 구매하고 있다. 특히나 화장품 분야는 인체 유해성과 같은 부정적인 요소에 대한 민감도가 높고, 자신의 고유한 피부 특성과의 조화도 고려되어야 하기 때문에, 전문적인 지식과 타인의 경험, 본인의 과거 경험 등을 종합적으로 생각하여 구매 의사결정을 내려야 하고, 이에 대해서 적극적인 소비자가 많아지고 있다. 이러한 움직임은 '셀프 뷰티' 와 같은 '셀프' 문화의 열풍과 함께, 문화 현상인 '그루밍족'의 등장, 사회적 트렌드인 'K-뷰티' 와도 동행한다고 할 수 있다. 맞춤형 화장품에 대한 관심의 급부상도 이러한 현상 중 하나라 볼 수 있다. 소비자들의 맞춤형 화장품의 니즈를 충족시키기 위해, 화장품 제조사나 관련 기업들은 ICT기술과의 융합을 통하여 프리미엄 서비스를 중심으로 소비자의 니즈에 대응하고 있다. 그러나 기업 및 시장 현황이 맞춤형 화장품을 향해 진화하고 있지만, 소비자의 피부 상태, 추구하는 감성, 실제 제품이나 서비스까지 소비자 경험을 전체적으로 완전하게 다루는 지능형 데이터 플랫폼은 부재한다. 본 연구에서는 소비자 경험에 대한 지능형 데이터 플랫폼 구축을 위한 첫 단계로 소비자 언어 기반의 화장품 감성 분석을 수행하였다. 소비자들 개인의 선호나 취향이 분명한 앰플/세럼 카테고리를 중심으로 매출 순위 1위에서 99위까지의 99개 제품을 선정하여, 블로그와 트위터 등의 SNS 상에 언급되는 후기 내에 화장품 경험에 대한 소비자 감성을 수집하였다. 총 357개의 감성 형용사를 수집하였고, 고객 여정 워크샵을 통해 유사 감성을 합치고, 중복 감성을 통합하는 작업을 수행하였으며, 최종 76개 형용사를 구축했다. 구축한 형용사에 대한 SOM 분석을 통해 화장품에 대한 소비자 감성에 대한 클러스터링을 실시했다. 분석 결과, 총 8개의 클러스터를 도출했고, 클러스터 별 각 노드의 벡터 값을 기준으로 소비자 감성 Top 10을 도출했다. 소비자 감성을 기준으로 클러스터별 소비자 감성에 서로 다른 특징이 발견됐으며, 소비자에 따라 다른 소비자의 감성을 선호, 기존과는 다른 소비자 감성을 고려한 추천 및 분류 체계가 필요함을 확인했다. 연구 결과를 통해 감성 분석의 활용 도메인이 화장품만이 아닌 다양한 영역으로 확장될 수 있음 확인했으며, 감성 분석을 통한 소비자 인사이트를 도출할 수 있다는 점을 시사했다. 또한, 본 연구에서 활용한 디자인 씽킹(Design Thinking)의 방법론의 적용하여 화장품 특화된 감성 사전을 과학적인 프로세스로 구축했으며, 화장품에 대한 소비자의 인지 및 심리에 대한 이해를 도울 수 있을 것으로 기대한다.

• 동양고전연구
• /
• 제62호
• /
• pp.145-176
• /
• 2016

본고는 개인의 덕성(德性)과 사회적 덕행(德行)의 보편적 가치와 규범이 제시되어 있는 유가(儒家) 경전(經典)을 토대로 군자(君子)다운 지도자상은 어떠한 것인가를 파악하는 작업이다. 따라서 인간다움을 참다운 것으로 삼고, 인간관계의 사회성을 제대로 실천하는 유덕자(有德者)의 가치관에 대하여 논의하고 있다. 군자상의 진면목은 조화의 균형 감각이 있고 자기 수양에 엄격하며 인간관계의 상생적 가치를 창출하는 등 진선미가 삼위일체로 융합되는 '성기성물(成己成物)'의 참된 인물상(人物像)이라는 점을 찾아보고자 한다. 유가(儒家)에서 말하는 성인(聖人), 현인(賢人), 대인(大人), 군자(君子) 등은 인간세상을 이끌어가는 사회지도자를 의미한다. 그들은 무엇보다도 인간다운 도리를 지키며 사회풍토를 아름답게 교화하고 정신과 물질(物質)의 조화(調和) 인격(人格)과 능력(能力) 경제(經濟)와 도덕(道德)을 겸비한 인물로 지목(指目)하고 있다. 현대 사회인들은 순수한 지성(知性)문화의 가치보다는 물질적 가치의 선호도(選好度)에 따라 개인적인 성장(成長)을 꾀하고, 시각적으로 보여 지는 외형적인 무한경쟁(無限競爭)에 편중되어 있다. 오늘날 디지털 시대에 자신의 개성을 연출하는 것은 부정할 수는 없지만, 외모(外貌)에 집착(執着)하여 지나친 다이어트로 건강미를 상실하고, 그로 인(因)한 정신적 스트레스는 외모 집착과 외모중시의 병적인 폐단을 불러일으키고 있다. 이러한 현상을 극복(克復)하기 위해 절실하게 요청되는 대안으로 내적 소양과 외적 전문성을 고루 겸비한 온전한 인격체, 즉 이른바 "문질(文質)이 빈빈(彬彬)"한 진선미(眞善美)의 융합적 지도자상이 필요하다고 하겠다. 유교사상은 수기치인(修己治人)의 도(道)를 현실에서 실천하는 것이다. 수기는 개인적으로는 덕성적 능력을 계발하여 도덕적 인격을 함양하는 것이며, 치인은 사회적으로는 함께 일하는 올바른 인간관계를 갖도록 소통(疏通)하는 것이다. 이 때문에 leader 또는 지도자는 자신뿐만 아니라 타인까지도 감화시킬 수 있어야 한다. 수기치인은 '스스로의 덕성을 가다듬어 다른 사람들을 이끈다.'는 의미이다. 참다운 지도자는 수기(修己)를 통해 자기성찰과 자기정립을 한 다음에 치인(治人) 또는 남들과 함께 살아가는 안인(安人)의 경지에 서게 되는 것이다. 모든 물건에는 값어치가 있고 나름대로의 德이 있듯이. 인간 역시 인격과 덕성(德性)을 갖추고자, 배우고 익혀 자신만의 전문성 신뢰성 그리고 인격과 능력을 겸비하여, 자신만의 브랜드(Brand)가치를 창출해 내고자 한다. 개인의 인격(人格)은 높은 지위나 재력 권력에서 나오는 것이 아니다. 인격이란 개인의 덕성으로서 자기수양을 통하여 마음에 조금도 티가 없는 상쾌함으로, 굳이 한자로 표현하자면 맑고 깨끗한 '소쇄(瀟灑)'에 부합된다고 할 수 있다. 즉 인간이 天性으로 품부 받은 덕성인 지(知) 인(仁) 용(勇)을 겸비한 지극히 인간다움의 인격(人格)을 지닌 지도자상으로 군자상(君子像)을 제시한다. 자아개발은 self leader, 즉 수기(修己)를 통하여 덕성수양과 자아경영의 힘을 기르게 된다. 관계영역의 leader(治人)는 자신(自身)의 덕성(德性)을 덕행(德行)으로 미루어 가는 즉 남의 입장에서 생각하는 역지사지(易地思之)의 마음으로 확대(擴大) 시킬 수 있다. 이처럼 자신의 마음을 미루어 남을 생각하는 리더십을 "대학(大學)"에서는 "혈구지도(?矩之道)"라고 한다. 논자의 견해는, 인격미(人格美)는 지(知) 인(仁) 용(勇)'으로 덕성(德性)의 씨앗을 일구고 상생미(相生美)는 '서(恕)'로써 타인(他人)에게 행동으로 보여주는 덕행의 마땅한 올바름을 구현하며 조화미(調和美)는 '혈구지도(?矩之道)'로써 남을 나처럼 아끼고 사랑하여 나와 같은 마음 즉 보편적 원리인 덕화(德和)를 구현할 수 있다고 여긴다. 이처럼, 지도자상의 자질은 자신의 소양과 남을 배려하는 마음이 총체적으로 잘 조화를 이룰 때 지도자가 지니고 있는 능력을 무한히 발휘하며, 많은 사람들과 공생(共生) 공존(共存)하며 서로 승승적(乘勝的)관계로 거듭 성장해 나갈 수 있는 것이다.

• 한국작물학회지
• /
• 제26권1호
• /
• pp.56-68
• /
• 1981

재래종의 수집종 가운데서 선접된 다종다벽계통 (약칭 : MET)의 일반적 대성을 분석하여 청예용 옥수수의 육종을 위한 기초자료를 얻고져 수행한 시험결과를 요약하면 다음과 같다. 1. 주요 특성들의 환경변이와 유전변이를 추정하였던 바 MET계통의 분벽성, 개체당 이삭수(수수)는 환경변이보다도 유전변이가 큰 것으로 추정되었다. 개체당 건물중 및 건엽중 등도 유전변이가 커 MET 계통의 유전적 특성으로 확인되었다. 그러나 건기중, 입중 등은 환경변이가 컸었다. 2. 몇가지 특성의 평균치를 두 품종간에 비교하면 다음과 같다. 가. 분벽기수 및 이삭수 : 수원 19호는 환경변이 (파종기, 재식밀도)에 관계없이 분벽기이 없고 이삭수도 변하지 않았으나 MET계통은 분벽기수 및 이삭수가 크게 달라졌다. 나. 개체당 건물중, 건엽중 및 건기중 : 파종기나 재식밀도에 따라 다르기는 하지만 MET계통의 개체당 건물이 수원 19호보다 비교적 높았으며 건엽중은 월등히 높았고(1.5-2.5)배 개체당 건기중도 비교적 높았다. 다. 개체당 입중 및 입중 대 건기엽중비 : MET계통의 개체당 입중은 수원 19호보다 5～40% 낮았다. 따라서 MET계통의 입중 대 건기엽중비가 평균 35%였고 수원 19호는 41%로서 높았다. 3. MET계통은 파종 2주 후부터 분벽하기 시작하여 3 ～ 5일간격으로 다음 분벽이 되었으며 생육초기에 왕성하여 최고 6~7개에 이르나 2~3개만이 유효기으로 신장되였다. 유효기비율은 소식일수록 높았다. 분벽의 발생은 주기의 최하절읍부터 시작되는 데 하부절위가 짧아 한절위에서 분벽이 여러개 발생하는 것처럼 보였다. 제 1, 2분벽기의 기장은 주기의 것에 비하여 10cm 정도씩 짧았으며 재식밀도에 따라 주기 및 제일, 이분벽기의 기장은 소식(60$\times$60cm)한 경우 밀식(60$\times$20cm)한 경우와 같이 분벽들에 의한 밀식의 효과가 있었고 중간재식밀도(60$\times$40cm)인 경우에는 소ㆍ밀도의 중간되는 기장을 보였다. 4. MET계통은 개체당 이삭수가 많은 것에 반하여 이삭의 크기는 수원 19호의 \frac{1}{3}도 못되었다. 각분벽기에 달리는 이삭수는 소식의 경우 주기에 4개, 제일, 이분벽기에 2～3개씩 달렸다. MET계통의 입은 경입종이며 황색입이 주가되고 백색입이 약간 섞여 있었으며 100입중은 14~15gr. 의 소입종이었다. MET계통은 착수고가 수원 19호보다 훨씬 높았다. 5. 주요 특성간의 상간 : 수원 19호에 비하여 MET 계통은 주요 특성간에 높은 상관계수를 보여 유전상관도 높을 것이라는 것을 간접적으로 나타내주었다. 6. MET계통은 생장속도가 수원 19호보다 훨씬 늦었으며 개화기도 2~3주나 늦었다. 7. 흑조위축병 : 수원 19호와 같이 MET계통도 흑조위축병에 대해 이병성이었다. 이병성은 늦게 파종하거나 밀식할수록 높아지는 경향이 있었다.

• 벤처창업연구
• /
• 제18권3호
• /
• pp.211-226
• /
• 2023

포스트 코로나 시대에 접어들면서 그 동안 움츠렸던 경제활동들이 다시 활발해지고 있다. 특히 4차 산업혁명 시대 디지털 전환의 기회에 따른 기술창업이 증가되는 추세이지만 창업 교육 콘텐츠는 기술적인 변화의 속도를 따라가지 못하고 있다. 본 연구는 기술창업의 수요 증가로 변화와 발전이 요구되는 창업교육 콘텐츠 중에서 창업 멘토링의 중요성을 확인하고자 한다. 창업 멘토링은 예비창업자와 초기창업자들의 창업 성공을 위해 전문 역량을 보유한 멘토가 멘티들의 수준에 맞게 맞춤형으로 성취 동기, 경영 기술, 문제 해결에 도움을 주는 행동으로 이미 대부분의 창업교육 프로그램에 구성요소로 포함되어 있다. 이를 위해 멘토링 기능 중 멘티의 창업지식과 자기 효능감을 독립변수로 설정하고, 창업의지와 멘토링 만족도를 종속변수로 설정한 후 교육생의 창업 여부를 예비 창업가와 초기 창업가로 분류, 조절변수로 설정하여 연구모형을 설계하고 가설을 설정하였다. 그리고 ICCE 창업스쿨 및 오퍼스 창업스쿨에서 창업 멘토링 교육생들을 대상으로 설문조사를 실시하여 실증적 분석을 진행하였다. 실증 분석 결과를 요약해보자면 첫 번째, 창업 멘토링 기능 중 창업지식과 자기 효능감은 창업의지에 유의적인 정(+)의 영향을 주는 것으로 분석되었다. 두 번째, 창업 멘토링 기능 중 창업지식과 자기 효능감은 멘토링 만족도에 유의적인 정(+)의 영향을 주는 것으로 분석되었다. 세 번째, 창업 여부는 창업지식과 창업의지에 유의미한 조절효과가 없다고 분석되었다. 네 번째, 창업 여부는 멘토링 만족도에 유의미한 조절효과가 없다고 분석되었다. 다섯 번째, 창업 여부가 자기 효능감과 창업의지 사이에 유의미한 조절효과가 있는 것으로 나타났다. 연구 분석 결과를 통해 본 시사점은 첫 번째로 창업교육에서 멘토링기능은 초기 창업가와 예비 창업가 모두에게 창업의지와 만족도에 유의미한 성과를 내는 것으로 분석되어 앞으로도 모든 창업교육에서 멘토링을 적극적으로 활용해야 할 것으로 보인다. 두 번째로 창업 여부와 멘토링기능 및 효과는 대체로 별다른 관련이 없는 것으로 분석되었다. 하지만 멘토링을 통한 자기 효능감 향상을 통한 창업의지는 창업 여부와 유의미한 관련이 있는 것으로 분석되었고, 멘토들이 멘토링을 진행할 때 멘티의 창업 여부를 확인하고 맞춤형 멘토링을 하는 것이 더 큰 자기 효능감과 창업의지를 갖게 하는데 도움이 된다고 나타났다. 현재 국내에서 진행되는 많은 창업교육들은 편의성 등을 이유로 초기 창업가와 예비 창업가를 동시에 교육하고 있다. 하지만 본 연구결과를 통해 소규모로 진행되는 창업 멘토링에서라도 멘티의 창업 여부와 같은 세부적인 분류를 통해 맞춤형 멘토링을 진행하는 것이 멘티의 성공적인 창업과 높은 만족도를 위한 방법이 될 수 있다는 방안을 제시하였다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• 한국작물학회지
• /
• 제7권1호
• /
• pp.1-29
• /
• 1969

중부지방에 있어서 수도건답직파재배 기술체계를 확립하고저 충청남도농촌진흥원에서 품증,시비, 파종기와 파종량, 관수시기 및 제초제에 관한 시험을 실시하였는데 그 결과를 요약하면 다음과 같다. 1. 수도 주요품종 16개를 건답직파재배를 하고 또한 수개 품종은 보통 이앙재배도 병행하여 건답직파재배의 경우와 수량 및 수량구성요소에 대하여 비교하였으며 각 품종의 생육과 수량 및 수량구성요소에 대한 특성을 조사하여 품종간의 차이를 보았다. (1) 건답직파재배는 이앙재배보다 수수가 현저히 많았으며 1수영화수는 반대로 매우 적었으며 결실율은 낮았고 수량은 품종에 따라 차이가 있는데 호광은 많았고 농립2005는 이앙재배보다도 적었다. (2) 공시품종 16개 가운데 수량이 10a당 325kg이상으로서 비교적 많았던 품종은 선단, 농림2005, 재건, 호광, 팔굉 및 고시였고 반대로 271kg이하로서 비교적 적었던 품종은 남풍, 팔달, 농공, 농림29호, 은방주10001 및 ${\ulcorner}$시로가네${\lrcorner}$로서 그들 품종의 수량과 수량구성요소와의 관계를 보면 ${\bullet}$ 수수와 수량 : ㄱ. 수수가 많고 수량이 많은 품종=재건, 호광, 팔굉, 고시. ㄴ. 수수가 적고 수량이 많은 품종=선단, 농림2005. ㄷ. 수수가 많고 수량이 적은 품종=은방주10001 ${\ulcorner}$시로가네${\lrcorner}$. ㄹ. 수수가 적고 수량도 적은 품종=남풍, 팔달, 농림29호. 1. 수영화수와 수량 : ㄱ. 1수영화수가 많고 수량이 많은 품종=선단, 농림2005, 고시. ㄴ. 1수영화수가 적고 수량이 많은 품종=재건, 호광, 팔굉. ㄷ. 1수영화수가 많고 수량이 적은 품종=팔달, 남풍. ㄹ. 1수영화수가 적고 수량도 적은 품종=농림29호. 은방주10001 ${\ulcorner}$시로가네${\lrcorner}$. ${\bullet}$ 결실율과 수량 : ㄱ. 결실율이 높고 수량이 많은 품종=재건, 선단, 농림2005, 팔굉. s. 결실율이 낮고 수량이 많은 품종=호광, 고시. ㄷ. 결실율이 높고 수량이 적은 품종=은방주, 팔달, ㄹ. 결실율이 낮고 수량도 적은 품종=은방주10001, 남풍, ${\ulcorner}$시로가네${\lrcorner}$.${\bullet}$ 천립중과 수량 : ㄱ. 천립중이 무겁고 수량이 많은 품종=농림2005, 호광. ㄴ. 천림중이 가볍고 수량이 많은 품종=선단, 재건. ㄷ. 천립중이 무겁고 수량이 적은 품종=농광, 은방주. ㄹ. 천립중이 가볍고 수량도 적은 품종=농림29호, ${\ulcorner}$시로가네${\lrcorner}$. 2. 삼요소의 시용 시험결과 그 적량은 10a당 질소 10kg, 인산 5kg, 및 가리 6kg 정도였으며 질소는 8kg 이상의 경우에는 분시할수록 비효가 높았으며 특히 벼의 후기 중점시비에 의하여 1수영화수와 결실율의 증대가 크게 이루어졌다. 3. 파종기와 파종량에 관한 시험결과는 공시품종선단의 파종적기는 4월 25일부터 5월 10일경까지 인데 이 기간중 일찍 파종하는 경우에 파종적량은 10a당 약 8${\ell}$이고 늦은 경우에는 12${\ell}$ 정도였다. 여기서 늦게 파종한 경우 감수의 가장 큰 원인은 1수영화수가 적어지기 때문이었다. 4. 건답직파에 대한 담수상태로 관수를 시작하는 적기는 파종후 55일인 6월 25일구가 수량이 가장 많았고 이보다 15일전인 6월 10일과 15일후인 7월 15일구도 좋았으며 이보다 늦어지면 감수됨을 인정하였다. 5. LOROX.TOK.PCP.MO-338의 약제토양처리구들은 관행제초구의 수량과 통계적으로 유의차를 보이지 않았으나 수치적으로는 관행제초구보다 적었다. 한편 관수후에 TOK.MO-338, StamF-34, ORDRAM의 약제처리를한 구의 수량은 관행제초구에 비하여 ORDRAM과 TOK는 유의차가 인정되지 않았으며 그밖에 약제처리구는 수량이 적음을 인정하게 되었다. 또한 각약제의 토양처리에 대한 잡초의 반응은 각각 다르고 LOROX는 ${\ulcorner}$바랭이${\lrcorner}$에 대하여 살초율이 높았고 TOK, MO-338은 화본과잡초에도 효과가 있었으나 그밖에 잡초에 대하여도 살초율이 높았다. 그리고 관수호의 처리에 있어서 ORDRAM 및 TOK는 살초율이 높았고 TOK, MO-338 및 StamF-34는 살초효과도 있고 그밖에 잡초에 대해서도 살초효과가 좋았다.