• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.8
• /
• pp.2139-2157
• /
• 1994

In order to understand the delamination between leadframe and epoxy molding compound in an electronic packaging of surface mounting type, the stress intensity factor, T-stress and J-integral in fracture mechanics are obtained. The effects of geometry, material properties and molding process temperature on the delamination are investigated taking into account the temperature dependence of the material properties, which simulates as more realistic condition. As the crack length increases the J-integral increases, which suggest that the crack propagates if it starts growing from the small size. The effects of the material properties and molding process temperature on stress intensity factor, T-stress is and J-integral are less significant than the chip size for the practical cases considered here. The T-stress is negative in all eases, which is in agreement with observation that interfacial crack is not kinked until the crack approaches the edge of the leadframe.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.578-582
• /
• 2005

In this study, the conceptual foundation and development process of the Antecedent soil Moisture Condition(AMC) in SCS runoff curve number method are reviewed. Although the runoff volume is very sensitive with AMC condition, the AMC class limits developed in SCS(1972) are used in rainfall-runoff analysis without careful consideration. Tn this study, following the SCS curve number development process, rainfall-runoff characteristics of the Jang-Pyung subbasin subject to the Pyung-Chang River basin are analyzed to evaluate the reasonability of the AMC class limits at present. The New AMC class limits are proposed by the sensitive analysis of the antecedent rainfall - curve number value. As a result, the classification value of AMC-I with II is 22mm of antecedent 5-day rainfall amount, and the classification of AMC-II with III is 117mm in growing season. When the New AMC class limits are applied to Jang-Pyung subbasin, AMC probability distribution shows that the AMC-II has increased remarkably even though the AMC-I has a little higher value. But the AMC-III has the smallest one. According to the conceptual basis of the curve number method, the AMC probability distribution, the New AMC class limits adopted, gives reasonable results.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.6 no.4
• /
• pp.231-236
• /
• 2001

How much do we know about the biology of aging from cell culture studies Most normal somatic cells have a finite potential to divide due to a process termed cellular or replicative senescence. A growing body evidence suggests that senescence evolved to protect higher eu-karyotes, particularly mammals, from developing cancer, We now know that telomere shortening due to the biochemistry of DNA replication, induces replicative senescence in human cells. How-ever in rodent cells, replicative senescence occurs despite very long telomeres. Recent findings suggest that replicative senescence is just the tip of the iceberg of a more general process termed cellular senescence. It appears that cellular senescence is a response to potentially oncogenic in-sults, including oxidative damage. In young orgainsms, growth arrest by cell senescence sup-presses tumor development, but later in life, due to the accumulation of senescent cells which se-cret factors that can disrupt tissues during aging, cellular senescence promotes tumorigenesis. Therefore, antagonistic pleiotropy may explain, if not in whole the apparently paradoxical effects of cellular senescence, though this still remains an open question.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2000.10a
• /
• pp.185-188
• /
• 2000

Dongdaemoon clothes market can make traditional commerce to improve problems which happen to traditional commerce and satisfy between customers and salers through combination among Electronic Commerce which is growing up in 21 centuries place innovation This thesis is focusing on suggesting strategies which practice to let Dongdaemoon clothes market customers and wholesalers, retailers to use Electronic Commerce as strategic skills by analyzing core successful factors for adopting Electronic Commerce in Dongdaemoon clothes market. Adopting Electronic Commerce in Dongdaemoon clothes market when the customer make a reservation and the salers provide the customer with discounting service, the customer was willing to but it. Internet service categories which affect customer's satisfaction are providing lots of product information. This thesis shows providing information made the customer to increase customers's satisfaction degree and buying intention. Also convenience of product research, and reliability in transaction process can enable the customer to increase transaction reliability. These factors are very important in Electronic Commerce. In addition, factors which show customer's suggestion and inconvenience by using best seller information and discounting service board when they buy some items in Dongdaemoon clothes market affect the customer satisfaction degree and satisfaction degree of providing information. However, this thesis is analyzed that reliability of transaction process doesn't affect all successful factors such as product quality, size, online payment system, price reliability.

• Journal of Information Processing Systems
• /
• v.9 no.1
• /
• pp.1-30
• /
• 2013

The capitalization of know-how, knowledge management, and the control of the constantly growing information mass has become the new strategic challenge for organizations that aim to capture the entire wealth of knowledge (tacit and explicit). Thus, knowledge mapping is a means of (cognitive) navigation to access the resources of the strategic heritage knowledge of an organization. In this paper, we present a new mapping approach based on the Boolean modeling of critical domain knowledge and on the use of different data sources via the data mining technique in order to improve the process of acquiring knowledge explicitly. To evaluate our approach, we have initiated a process of mapping that is guided by machine learning that is artificially operated in the following two stages: data mining and automatic mapping. Data mining is be initially run from an induction of Boolean case studies (explicit). The mapping rules are then used to automatically improve the Boolean model of the mapping of critical knowledge.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.1
• /
• pp.691-696
• /
• 2015

The interest in software defects is growing. Companies are working on reducing them by various ways with a software development part, customer service part and quality management part. The defect data collected from them will be analyzed according to the condition and purpose to minimize the defect, and it will contribute to improving the quality of products. This study analyzed the software defect progress for companies based on the test maturity model, and set up the defect preventing process. They were applied to the project, and the number of defects decreased from 106 to 16. This study focused on the existing defect, which is a basic requirement for software quality management, and have importance by presenting a way to improve the software product quality with minimum resources.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.4
• /
• pp.87-92
• /
• 2013

In this study, we carried out the turning of plastic mold steel(STAVAX) with whisker reinforced ceramic tool(WA1) and analyzed ANOVA(Analysis of Variance) test. Multi-regression analysis was performed to find influential factors to surface roughness and to derive regression equation. Results are follows: From ANOVA test and confidence interval analysis of surface roughness, We found that influential factors to surface roughness was feed rate, cutting speed and depth of cut in order. From multi-regression analysis, we derived regression equation of STAVAX. it's coefficient of determination($R^2$) was 0.945 and It means that regression equation is significant. From experimental verification, we confirmed that surface roughness was predictable by regression equation. Compared with former research, we confirmed that increase of feed rate is the main cause of the growing of surface roughness and cutting force.

• Textile Coloration and Finishing
• /
• v.31 no.4
• /
• pp.233-240
• /
• 2019

Dyeing is an essential process for improving the value of textile products, but it is considered as one of industries causing pollution because of producing wastewater containing hazardous chemicals as well as using a large amount of water and energy. Global demand for greener technologies in textile field is getting much more attention and accordingly, the use of eco-friendly natural dyes is growing much larger. In textile printing, both dyes and pigments can be used. Pigment printing is more simple process and requires less water and less energy, compared to dye printing. In this study, the organic pigment was prepared from the marigold colorant. Samples were stencil printed, pressed(70℃, 3min) and then heat treated(150℃, 5min). The uptake of polyacrylic acid as a chemical binder was the lowest. In particular, marigold pigments were excellent in color and texture when Guar Gum and Sodium Alginate were used as binders. In addition, the light and washing fastness was rated very high as 4, 4/5 grades, and the rubbing fastness was also excellent as 3 and 4 grades.

• Journal of Microbiology and Biotechnology
• /
• v.10 no.4
• /
• pp.496-501
• /
• 2000

Escherichia cole NZN111, which is known as a pfl ldhA double mutant strin, was metabolically engineered to produce succinic acid by overexpressing malic enzyme into the E. coli controlled by a trc promoter. Fermentation studies were carried out in a LB medium by first growing cells aerobically to an $OD_{600}$ of 5. At this point, 0.01 mM IPTG was added to induce the overexpression of malic enzyme and the agitation speed was gradually lowered. When the culture $OD_{600}$ reached 11, a complete anaerobic condition was achieved by flushing with a $CO_3-H_2$ gas mixture. When NZN111(pTrcML) was cultured at $37^{\circ}C$, the final succinic acid concentration of 2.8 g/l could be obtained after 30 h of anaerobic cultivation. The fermentation results were analyzed by the calculation of metabolic fluxes. Metaolic flux analysis showed that about 85% of phosphoenolpyruvate (PEP) was converted to pyruvate, and further converted to malic acid by malic enzyme.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.227-238
• /
• 1993

IRRI Engineering Division has developed a well drilling rig attachment that matched power tiller or hand tractor. It was designed in response to the growing demand for ground water utilization for small-scale irrigation, especially in drought-sticken and rained farms in Asian countries. The power tiller-driven rig can drill 30 meters of 100mm well in an unconsolidated formation in one day and can be rapidly converted from rotary to jetting or to the percussion method of drilling to suit different soil and rock formation. In addition, the power tiller can be quickly installed or removed from the rig frame and can be used for transporting the rig to other sites. The rig can be dismantled into smaller sub-assemblies for carrying by hand into less accessible areas. One manufacturer in Central luzon Philippines has started to produce the rig for well drillers in Central Luzon. The Department of Agriculture in the Philippines have procured thirty three(33) units of these machines f r their Shallow Tubewell program.