• The Korean Journal of Malacology
• /
• v.30 no.4
• /
• pp.311-319
• /
• 2014

Early sexual maturation through temperature stimulation was induced in female and male of yezo scallop. Gonadosomatic index (GSI) in female showed $9.12{\pm}2.9$ in January, $14.89{\pm}2.9$ in February and $21.3{\pm}1.4$ in March in experiment I. GSI in experiment I showed a significant increase (P < 0.05) and in experiments II and III were not show significant variations (P > 0.05). It also showed significant between the control and the experiments I, II, and III in February (P < 0.05) measurements. Experiment I has showed good results in sexual maturation and spawning when compared with other experiments II and III and the control. Histological observation showed that ovary condition was in a growing stage in all the experiments I, II, and III. In February, ovary condition through histological observation was a late mature stage in all the experiments I, II, and III except the control of a growing stage. GSI and gonad weight were $4.4{\pm}0.88$ and 2.8 g, respectively in November whereas it was $15.1{\pm}2.8$, and 11.7 g, respectively in January and $21.7{\pm}5.4$, and 19.4 g, respectively in February after rearing at a water bath of $12^{\circ}C$ depending on the condition of experiment I. It was possible early releasing of eggs and sperms of yezo scallop in February instead of the middle of April to the end of May being spawning period. Fertilized eggs have become a gastrula stage through a spiral cleavage and then become a trochophore larvae after 36 hours. After 10 days, D-shaped larvae have changed into an umbo stage larvae and attached to juveniles in the post larvae after 20-23 days.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.32 no.1
• /
• pp.55-71
• /
• 1990

The purpose of this study is to find out the basic data for irrigation plans of red pepper and radish during the growing period, such as total amount of evapotranspiration, coefficent of evapotranspiration at each growth stage, the peak stage of evapotranspiration, the maximum ten day evapotranspiration , optimum irrigation point, total readily available moisture and intervals of irrigation date. The plots of experiment were arranged with split plot design which were composed of two factors, irrigation point for main plot and soil texture for split plot, and three levels ; irrigation point with pH1.7-2.0, pF2.1-2.4 and pF2.5-2.8, at soil texture of sandy soil, sandy loam and silty clay for both red pepper and radish, with two replications. The results obtained are summarized as follows. 1.1/10 exceedance probability values of maximum total pan evaporation during growing period for red peppr and radish were shown as 663.6 mm and 251.8 mm. respectively, and those of maximum ten day pan evaporation for red pepper and radish, 67.1 mm and 46.9 mm, respectively. 2.The time that annual maximum of ten day pan evaporation can he occurred, exists at any stage between the middle of May and the late of August for red pepper, and at any stage between the late of August and the late September for radish. 3.The magnitude of evapotranspiration and its coefficient for red pepper was occurred large in order of pF1.7-2.0 pF2.1-2.4 and pF2.5~2.8 in aspect of irrigation point and the difference in the magnitude of evapotranspiration and of its coefficient between levels of irrigation point was difficult to be found out due to the relative increase in water consumption resulted from large flourishing growth at the irrigation point in lower water content for radish. In aspect of soil texture they were appeared large in order of sandy loam, silty clay and sandy soil for both red pepper and radish. 4.The magnitude of leaf area index was shown large in order of pF2.1-2.4, pF2.5-2.8, and pFl.7-2.0, for red pepper and of pF2.5-2.8, pF2.1-2.4, pFl.7-2.0 for radish in aspect of irrigation point, and large in order of sandy loam, silty clay, sandy soil for both red pepper and radish in aspect of soil texture 5.1/10 exceedance probability value of evapotranspiration and its coefficient during the growing period for red pepper were shown as 683.5 mm and 1.03, respectively, while those of radish, 250.3 mm and 0, 99. respectively. 6.The time that the maximum evapotranspiration of red pepper can be occurred is in the middle of August around the date of ninetieth to hundredth after transplanting, and the time for radish is presumed to be in the late of September, around the date of thirtieth to fourtieth after sowing. At that time, 1/10 exceedance probability value of ten day evapotranspiration and its coefficient for red pepper is assumed to be 81.8 mm and 1.22, respectively, while those of radish, 49, 7 mm and 1, 06, respectively. 7.Optimum irrigation point for red pepper on the basis of the yield of raw matter is assumed to be pFl.7-2.0 for sandy soil, pF2.5-2.8 for sandy loam, and pF2.1-2.4 for silty clay. while that for radish is appeared to be pF2.5-2.8 in any soil texture used. 8.The soil moisture extraction patterns of red pepper and radish have shown that maximum extraction rates exist at 7 cm deep layer at the beginning stage of growth in any soil texture and that extraction rates of 21 cm to 35 cm deep layer are increased as getting closer to the late stage of growth. And especially the extraction rates have shown tendency to be greatest at 21cm deep layer from the most flourishing stage of growth for red pepper and at the last stage of growth for radish. 9.The total readily available moisture on the basic of the optimum irrigation point become 3.77-8.66 mm for sandy soil, 28.39-34.67 mm for sandy loam and 18.40-25.70 mm for silty clay for red pepper of each soil texture used but that of radish that has shown the optimum irrigation point of pF2.5-2.8 in any soil texture used. 12.49-15.27 mm for sandy soil, 23.03-28.13 mm for sandy loam, and 22.56~27.57 mm for silty clay. 10.On the basis of each optimum irrigation point. the intervals of irrigation date at the growth stage of maximum consumptive use of red pepper become l.4 days for sandy soil, 3.8 days for sandy loam and 2.6 days for silty clay, while those of radish, about 7.2 days.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.33 no.3
• /
• pp.215-221
• /
• 1988

The hop yield prediction model developed based on meteorological elements in Hoeongseong was Y=6,042.846-17.665 $X_1$-0.919 $X_2$-96.538 $X_3$-138.105 $X_4$＋86.910 $X_{5}$ ＋ $X_{6}$ with MS $E_{p}$ of 25.258, $R_{p}$$^{2}$ of 0.9991, R $a_{p}$$^{2}$ of 0.9962 and $C_{p}$ of 7.00. The minimum air temperature at early growing stage ( $X_1$), the total precipitation at cone ripening stage ( $X_2$), the maximum air temperature at flower bud differentiation stage ( $X_3$) and the maximum air temperature at flowering stage ( $X_4$) influenced on hop yield as decrement weather elements. The average air temperature at early growing stage ( $X_{5}$ ) and the total sunshine hours at cone development stage ( $X_{6}$ ) influenced on hop yield as increment weather elements.lements.

• Korean Management Science Review
• /
• v.11 no.2
• /
• pp.1-27
• /
• 1994

A reliability data processing MPRDP (Multi-Purpose Reliability Data Processor) has been developed in FORTRAN language since Jan. 1992 at KAERI (Korean Atomic Energy Research Institute). The purpose of the research is to construct a reliability database(plant-specific as well as generic) by processing various kinds of reliability data in most objective and systematic fashion. To account for generic estimates in various compendia as well as generic plants' operating experience, we developed a 'three-stage' Bayesian procedure[1] by logically combining the 'two-stage' procedure[2] and the idea for processing generic estimates[3]. The first stage manipulates generic plant data to determine a set of estimates for generic parameters,e.g. the mean and the error factor, which accordingly defines a generic failure rate distribution. Then the second stage combines these estimates with the other ones proposed by various generic compendia (we call these generic book type data). This stage adopts another Bayesian procedure to determine the final generic failure rate distribution which is to be used as a priori distribution in the third stage. Then the third stage updates the generic distribution by plant-specific data resulting in a posterior failure rate distribution. Both running failure and demand failure data can be handled in this code. In accordance with the growing needs for a consistent and well-structured reliability database, we constructed a generic reliability database by the MPRDP code[4]. About 30 generic data sources were reviewed and available data were collected and screened from them. We processed reliability data for about 100 safety related components frequently modeled in PSA. The underlying distribution for the failure rate was assumed to be lognormal or gamma, according to the PSA convention. The dependencies among the generic sources were not considered at this time. This problem will be approached in further study.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.26 no.4
• /
• pp.37-51
• /
• 1984

The purpose of this study is to find out the determination method of designed duty of water in the rice fields through the comparison of the net unit duty of water at the late reduction division to heading stage with that at the planting stage. The data used for analysing this problem are the data of precipitation and gauge evaporation observed by Cheong-ju Meterological Center, the coefficient of evapotranspiration by College of Agriculture, Chung Buk University and the data of transplanting progressing in Boun area. The results obtained from this analysis are summarized as follows. 1.The occurring year of 1/10 probability value for available precipitation, gauge evaporation and mean maximum daily evapotranspiration during growing season is the year of 1977. 2.The 1/10 probability values of mean maximum evapotranspiration per day under the production rate of 1, 400kg/l0a and 1, 500kg/10a based on the weight of dry matters are 9. 2mm/day and 9. 6mm/day, respectively. 3.The net unit duty of water required in the fields that the maximum planting rate exists is more than the one in the fields that the planting rate is uniform in the planting stage. 4.The determination of net unit duty of water in the late reduction division to heading stage or the planting stage depends upon the daily evapotranspiration and percolation rate in the late reduction division to heading stage or the water depth required for planting and daily consumptive use of water after planting at the planting stage. Therefore the use of figure 5-(1) to figure 5-(6) can easily make the determination of the designed net unit duty of water out of above two kinds of net unit duty of water.

• Journal of Biosystems Engineering
• /
• v.40 no.1
• /
• pp.89-93
• /
• 2015

Purpose: Machine vision-based image processing methods can be useful for estimating the fresh weight of plants. This study analyzes the ability of two different image processing methods, i.e., morphological and pixel-value analysis methods, to measure the fresh weight of lettuce grown in a closed hydroponic system. Methods: Polynomial calibration models are developed to relate the number of pixels in images of leaf areas determined by the image processing methods to actual fresh weights of lettuce measured with a digital scale. The study analyzes the ability of the machine vision- based calibration models to predict the fresh weights of lettuce. Results: The coefficients of determination (> 0.93) and standard error of prediction (SEP) values (< 5 g) generated by the two developed models imply that the image processing methods could accurately estimate the fresh weight of each lettuce plant during its growing stage. Conclusions: The results demonstrate that the growing status of a lettuce plant can be estimated using leaf images and regression equations. This shows that a machine vision system installed on a plant growing bed can potentially be used to determine optimal harvest timings for efficient plant growth management.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.7
• /
• pp.60-66
• /
• 2005

This paper presents the single-stage TSFC(Two-Switch Forward Converter). Recently, due to growing concern about the harmonic pollution of power distribution systems and the adoption of standards such as ICE 61000-3-2 and IEEE 519, There is a need to reduce the harmonic contests of AC line currents of power supplies. This research proposed the single-stage two switch forward circuit for low voltage and high current output. The principle of operation, feature and design considerations is illustrated and verified through the experiment with a 200[W](5[V], 40[A]) 100[kHz] MOSFET based experimental circuit.

• Knowledge Management Research
• /
• v.17 no.2
• /
• pp.75-101
• /
• 2016

Since 2009, China has become biggest automobile supplier and consumer all over the world. Chinese government and automobile firms have been executed strategic and aggressive industry policy and business strategy for nurturing automobile industry as a core manufacturing industry. However, can we assure that all of these policy and strategy have positive effect on Chinese automobile industry? For fulfilling this gab, our research examined the government policy and firm's strategy in different development stage of Chinese automobile industry. According to research result, at initial stage(1983-1996), Chinese automobile industry has grown by technological learning and reverse engineering from Soviet Union, Japan and Germany. In rapid growing stage(1996-2009), Chinese automobile firms have succeed to develop and produce own brand product with 100% own technology. And this kind of quantum jump in technology development was conducted by joint venture policy and M&A strategy. However, at the fourth stage(2010-), Chinese government and firms have over invested and focused on Electric Vehicle manufacturing without developing core technology or SW. Overall, the old-fashioned policy and strategy module in manufacturing industry of China could have negative effect on its industry development.

• Journal of Digital Convergence
• /
• v.4 no.2
• /
• pp.127-142
• /
• 2006

This paper uses a Mobilans case based on software system to derive the results of our study. Recently, the mobile phone payment entered its matured stage and became most frequently used payment method in all internet sites. And, in order to prepare for the future ubiquitous market, every mobile phone payment methods has different speed of development, market status and target segments in the market. This paper also discusses about the background and current status of Korean mobile phone payment market using SMS(Short Message Service) to purchase items on internet which is growing sharply every year. Also, we try find the key factors to succeed in this growing market. In addition to safety, delayed payment and the immediateness for use of mobile phone, we also suggest that a highly developed hardware system is an additional factor under the increased demands for the convenience with various applications.

• Korean Journal of Poultry Science
• /
• v.21 no.2
• /
• pp.101-111
• /
• 1994

From the observations of dietary self-selection by growing pullets, step-up protein or reverse protein and single-stage low protein pullet feeding systems were developed. They offered another pullet feeding concept that appears to control the body weight effectively and to reduce the consumption of feed and nutrients without impairment of subsequent laying performance. It is obvious from the feed and nutrient consumption pattern of layers fed diets for self-selection of energy, protein and calcium that they have a daily cyclic requirement rather than a constant requirement for nutrients. It seems that a practical self-selective feeding system is needed to meet the daily cyclic requirement for nutrients without consuming an excess of energy and protein at certain times of the day as compared to the complete or single diet where layers have to consume extra energy and protein in the afternoon when they have a specific appetite mainly for calcium.