• Resources Recycling
• /
• v.15 no.5 s.73
• /
• pp.3-10
• /
• 2006

The solvent extraction for the separation of platinum group metals from the leach liquor of spent automotive catalysts has been studied. Tri-n-butyl phosphate (TBP), tri-n-octylamine (TOA) and di-n-hexyl sulfide (DHS) were used as extractants and kerosene as a diluent. The extraction behavior of platinum, palladium and rhodium has been investigated as functions of different kinds of extractants and their concentrations. In addition, the extraction behavior of the major metal impurities such as cerium, lead, iron, magnesium and aluminum has been investigated. Platinum and palladium were extracted with TBP. And platinum, palladium and rhodium were extracted with TOA. Platinum was co-extracted with palladium into the organic phase by solvent extraction using SFI-6 of DHS extractant, but only palladium was selectively extracted with SFI-6R. The selective extraction of palladium with SFI-6R was found better than that with SFI-6, but the kinetics of extraction with SFI-6R was found poor in comparison to SFI-6. The metal impurities extracted simultaneously during the extraction of platinum group metals should be removed in scrubbing and stripping processes. A suitable process has been proposed for the separation of platinum group metals from the leach liquor of spent automotive catalysts. Initially palladium was extracted with SFI-6R, followed by the separation of platinum with TBP or TOA leaving rhodium in the raffinate.

• Journal of Preventive Medicine and Public Health
• /
• v.40 no.2
• /
• pp.155-161
• /
• 2007

Objectives : Bisphenol A diglycidyl ether (BADGE) is the major component in commercial liquid epoxy resins, which are manufactured by co-reacting bisphenol A with epichlorohydrin. This study was performed to show the developmental effects of prenatal and postnatal exposures to BADGE in male rat offspring. Methods : Mated female rats were divided into four groups, each containing 12 rats. The dosing solutions were prepared by thoroughly mixing BADGE in corn oil at the 0, 375, 1500 and 3000 mg/kg/day concentrations. Mated females were dosed once daily by oral gavage on gestation day (GD) 6 - 20 and postnatal day (PND) 0 - 21. Pregnant female dams were observed general symptoms and body weight. Also, male pups were observed the general symptoms, body weight, developmental parameters (e.g. anogenital distance, pina detachment, incisor eruption, nipple retention, eye opening, testis descent), organ pathologic changes and hormone levels of plasma. Results : Pregnant rats treated with BADGE died at a rate of about 70% in the 1500 mg/kg/day group and all rats treated with 3000 mg/kg/day died. Body weight, for male pups treated with doses of 375 mg/kg/day, was significantly lower than in the control group at PND 42, 56, and 63 (p<0.05). Evaluation of body characteristics including; separation of auricle, eruption of incisor, separation of eyelid, nipple retention, descent of testis, and separation of the prepuce in the BADGE treated group showed no difference in comparisons with the control group. AGD and adjusted AGD (mm/kg) for general developmental items in BADGE 375 mg/kg/day treated pups tended to be longer than in controls, however, these differences were not statistically significant. Relative weights of adrenal gland, lung (p<0.05), brain, epididymis, prostate, and testis (p<0.01) were heavier than in control in measures at PND 9 weeks. There were no significant changes in comparisons of histological findings of these organs. Loss of spermatids was observed in the seminiferous tubule at PND 9 weeks, but no weight changes were observed. The plasma estrogen levels were similar in the control and treatment groups at PND 3, 6 and 9 weeks. The plasma testosterone levels in the control group tended to increase with age. However, in the BADGE 375 mg/kg/day treated male pups it did not tend to increase. Conclusions : These findings suggest that BADGE is a chemical that has developmental effects consistent with it being an endocrine disruptor.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.9
• /
• pp.1396-1398
• /
• 2003

• Analytical Science and Technology
• /
• v.11 no.4
• /
• pp.231-234
• /
• 1998

Separation factor for $^6Li$ and $^7Li$ has been determined using ion exchange resin having 1,7,13-trioxa-4,10,16-triazacyclooctadecane ($N_3O_3$) as an anchor group. The ion exchange capacity of the $N_3O_3$ ion exchanger was 2.0 meq/g dry resin. The lighter isotope, $^6Li$, is concentrated in the fluid phase, while the heavier isotope, $^7Li$, is enriched in the resin phase. By column chromatography [0.3 cm(I.D)${\times}$30 cm (height)] using 3.0 M ammonium chloride solution as an eluent, single separation factor, ${\alpha}$, 1.018, i.e. $(^7Li/^6Li)_{resin}/(^7Li/^6Li)_{fluid}$ was obtained by the Glueckauf theory from the elution curve and isotope ratios.

• Wind and Structures
• /
• v.5 no.2_3_4
• /
• pp.177-192
• /
• 2002

Computation solutions for the flow around a cube, which were generated as part of the Computational Wind Engineering 2000 Conference Competition, are compared with full-scale measurements. The three solutions shown all use the RANS approach to predict mean flow fields. The major differences appear to be related to the use of the standard $k-{\varepsilon}$, the MMK $k-{\varepsilon}$ and the RNG $k-{\varepsilon}$ turbulence models. The inlet conditions chosen by the three modellers illustrate one of the dilemmas faced in computational wind engineering. While all modeller matched the inlet velocity profile to the full-scale profile, only one of the modellers chose to match the full-scale turbulence data. This approach led to a boundary layer that was not in equilibrium. The approach taken by the other modeller was to specify lower inlet turbulent kinetic energy level, which are more consistent with the turbulence models chosen and lead to a homogeneous boundary layer. For the $0^{\circ}$ case, wind normal to one face of the cube, it is shown that the RNG solution is closest to the full-scale data. This result appears to be associated with the RNG solution showing the correct flow separation and reattachment on the roof. The other solutions show either excessive separation (MMK) or no separation at all (K-E). For the $45^{\circ}$ case the three solutions are fairly similar. None of them correctly predicting the high suctions along the windward edges of the roof. In general the velocity components are more accurately predicted than the pressures. However in all cases the turbulence levels are poorly matched, with all of the solutions failing to match the high turbulence levels measured around the edges of separated flows. Although all of the computational solutions have deficiencies, the variability of results is shown to be similar to that which has been obtained with a similar comparative wind tunnel study. This suggests that the computational solutions are only slightly less reliable than the wind tunnel.

• Journal of Acupuncture Research
• /
• v.20 no.4
• /
• pp.93-101
• /
• 2003

Objective: The purpose of this study is to find out the effect of acupuncture at HT7 (Shinmun) on the feeding behavior and hypothalamic neuropeptide Y(NPY) expression in the maternally separated rat pups. Methods: To show the effect of acupuncture, we performed maternal separation(MS) for 7 days beginning on postnatal day 14, and observed body weight, food intake, and NPY immunoreactivity in the paraventricular nucleus (PVN) of hypothalamus after acupuncturing at HT7, the end of the transverse crease of the ulnar wrist of the forepaw. Results: MS induced a significant decreases in body weight and food intake, while acupuncture treatment at acupoint HT7 showed much more improvement in those evaluations. NPY-immunoreactivity in area PVN were decreased in the MS group, but significantly increased in the HT7 group. Conclusions: These findings suggest that acupuncture has an effect on the feeding disorders caused by MS, possibly by modulating NPY expression in the PVN.

• Health Policy and Management
• /
• v.14 no.3
• /
• pp.20-44
• /
• 2004

The National Health Insurance Expenditure has been increased rapidly since the introduction of the separation of prescription and dispensing in 2000, and this trend of rapid growth in overall spendings rate has been observed predominantly among medical practitioners. This study was conducted to investigate the growth rate and distributional changes in private medical practitioners' expenses from 1999 to 2002 and its determinants using the National Health Insurance claims data. The total increasing rate of all medical practitioners' expenditure paid by the National Health Insurance between 1999 and 2002 was $41.71\%$, which exceeding that of general hospitals by $20\%$p. But the income distribution among each practitioner was improved as the changes in Gini coefficient(from 0.40 to 0.38) and decile distribution ratio(from 0.25 to 0.29) during the same period showed. However, this improvement in distributional patterns is not enough since even in 2002 it turned out that the highest $10\%$ income group earned 33times more than the lowest $10\%$ income group did. Also, higher Gini coefficient was observed in larger cities and some department like plastic surgery, obstetrics and gynecology. The major causes of this differentials in medical practitioners' expenses were factors related to medical demand like proportion of old population, residential economic status in a given area. In addition, providers' economic incentives also played an important role in determining their income distribution. The large income differentials among physicians may imply a skewed distribution of patients and thus long waiting time, inefficient utilization of resources and potential inadequate quality of care. In this sense, unreasonable distributional gaps should be reduced, so effective measures as well as ongoing monitoring would be necessary to correct current distributional problems.

• Analytical Science and Technology
• /
• v.6 no.1
• /
• pp.121-129
• /
• 1993

UV/VIS spectrophotometer interfaced with HPIC(High Performance Ion Chromatography) has been applied to the determination of lanthanide elements. The separation of lanthanide elements with HPIC helped to avoid erroneous analytical results due to interferences. Individual lanthanide elements at ppm level were separated on a HPIC CS5 column using pyromellitic acid and oxalic acid. The individual lanthanide elements were detected at 520nm following post-column reaction with PAR. Sm, Eu, Gd, Y, Tb, Dy, Ho, Er, Tm, Tb, and Lu were separated by pyromellitic acid. La, Ce, Pr and Nd were separated by oxalic acid. Appropriate pH of pyromellitic acid for separation was at pH 2.99.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.8
• /
• pp.801-806
• /
• 2001

A study has been carried out on the separation of gold, iridium, palladium, rhodium, ruthenium and platinum in chromite samples and their quantitative determination using inductively coupled plasma atomic emission spectrometry (ICP-AES). The dissolution condition of the minerals by fusion with sodium peroxide was optimized and chromatographic elution behaviour of the rare metals was investigated by anion exchange chromatography. Spectral interference of chromium, a matrix of the minerals, was investigated on determination of gold. Chromium interfered on determination of gold at the concentration of 500 mg/L and higher. Gold plus trace amounts of iridium, palladium, rhodium and ruthenium, which must be preconcentrated before ICP-AES was separated by anion exchange chromatography after reducing Cr(Ⅵ) to Cr(III) by H2O2. AuCl4- retained on the resin column was selectively eluted with acetone- HNO3-H2O as an eluent. In addition, iridium, palladium, rhodium and ruthenium remaining on the resin column were eluted as a group with concentrated HCl. However, platinum was eluted with concentrated HNO3. The recovery yield of gold with acetone-HNO3-H2O was 100.7 ${\pm}2.0%$, and the yields of palladium and platinum with concentrated HCl and HNO3 were 96.1 ${\pm}1.8%$ and 96.6 ${\pm}1.3%$, respectively. The contents of gold and platinum in a Mongolian chromite sample were 32.6 ${\pm}$ 2.2 ${\mu}g$/g and 1.6 $\pm$ 0.14 ${\mu}g$/g, respectively. Palladium was not detected.

• Korean Journal of Metals and Materials
• /
• v.47 no.3
• /
• pp.155-168
• /
• 2009

In this study, microstructural investigation was conducted on the separation phenomenon occurring during Charpy impact tests of API X80 linepipe steels. Particular emphasis was placed on the role of microstructural phases present in the API X80 steels such as acicular ferrite, bainite, and hard secondary phases. Detailed microstructural analysis of fractured impact specimens showed that highly elongated bainite worked as prior initiation sites for separations, and that the number and length of separations increased with increasing volume fraction of bainite. In the steels having high work hardenability, tearing-shaped separations were found because the hammer-impacted region was seriously hardened during the impact test, which led to the reduction in the impact toughness. As the test temperature decreased, the tendency of separations increased, but separations were not observed when the cleavage fracture prevailed at very low temperatures. Thus, the minimization of the formation of bainite and secondary phases in the steels would be beneficial for preventing or minimizing separations because separations deteriorated low-temperature impact toughness.