• Current Photovoltaic Research
• /
• 제12권2호
• /
• pp.37-40
• /
• 2024

One of the current innovation trends in the solar industry is the increase in the size of silicon wafers. As the wafer size increases, the series resistance of the module rises, highlighting the need for research on methods for cutting and bonding solar cells. Among these, the Infrared (IR) laser scribing technique has been extensively researched. However, there is still insufficient optimization research regarding the thermal damage caused by lasers on the Transparent Conductive Oxide (TCO) layer of Heterojunction (HJT) solar cells. Therefore, in this study, we systematically varied conditions such as IR laser scribing speed, frequency, power, and the number of scribes to investigate their impact on the performance of cut cells under each condition. Additionally, we conducted a comparative analysis of thermal damage effects on the TCO layer based on varying scribing depths.

• 식품기술
• /
• 제22권2호
• /
• pp.331-338
• /
• 2009

• 한국막학회:학술대회논문집
• /
• 한국막학회 1999년도 춘계 총회 및 학술발표회
• /
• pp.86-89
• /
• 1999

• 한국수소및신에너지학회논문집
• /
• 제22권4호
• /
• pp.424-431
• /
• 2011

The Sulfur-Iodine(SI) thermochemical hydrogen production process consists of three sections, which are so called the Bunsen reaction section, the $H_2SO_4$ decomposition section and the HI decomposition section. In order to identify the phase separation characteristics in the reaction conditions with the high solubility of $SO_2$, we conducted the Bunsen reaction at the low temperatures, ranging from 283 to 298K, with the $I_2/H_2O$ molar ratios of 2.5/16.0 and 3.5/16.0. The molar ratios of HI/$H_2SO_4$ products obtained from low temperature Bunsen reactions were ca. 2, indicating that there were no side reactions. The amount of reacted $SO_2$ was increased with decreasing the temperature, while the amounts of unreacted $I_2$ and $H_2O$ were decreased. In the phase separation of the products, the amount of a $H_2SO_4$ impurity in $HI_x$ phase was increased with decreasing the temperature, though the temperature has little affected on HI and $I_2$ impurities in $H_2SO_4$ phase.

• 분석과학
• /
• 제10권6호
• /
• pp.403-407
• /
• 1997

Anchor group으로서 1,7,13-trioxa-4,10,16-triazacyclooctadecane($N_3O_3$)을 가지고 있는 이온교환수지를 사용하여 $^6Li$와 $^7Li$의 분리인자를 측정하였다. 가벼운 동위원소 $^6Li$는 액상에, 무거운 동위원소 $^7Li$는 이온교환수지상에 농축되었다. 2.0M 염화암모늄 용액을 용리액으로 사용한 컬럼 [0.9cm(내경)${\times}$20cm(높이)] 크로마토그래피에 의하여, 1.009의 분리인자, ${\alpha}$, $(^7Li/^6Li)_{resin}$/$(^7Li/^6Li)_{solution}$값을 얻었다. 이 값은 용리곡선과 동위원소비로부터 Glueckauf 이론을 적응하여 얻은 것이다.

• 공업화학
• /
• 제8권6호
• /
• pp.945-953
• /
• 1997

방향계 폴리에테르이미드를 건/습 상분리방법으로 막을 만들고 imide group이 갖는 선택 투과 특성과 표면층의 구조를 변화시켜 이때 나타나는 물-알콜 혼합액의 투과 증발 특성에 대해 연구하였다. 막의 선택성은 구조 변화의 반응시간에 따라 일정 시간까지 선형적으로 증가하였으며 이때의 구조 변화는 미 반응 막보다 치밀한 구조로 변화됨에 따른 효과로 보이고 있다. 치밀 막의 경우엔 90% 에탄올 용액에서 160의 선택성을 보였고, 이소프로필알콜용액에서는 2000이 넘는 높은 선택성을 보여줌으로써 이미드재료가 높은 투과 선택성이 있음을 보여주고 있다. 막의 투과도에 대한 온도 의존성은 온도 증가에 따라 선형적으로 증가하였고 선택도 또한 증가함을 보여주었다.

• 한국산학기술학회논문지
• /
• 제17권1호
• /
• pp.181-187
• /
• 2016

실리카는 다양한 산업용 소재로 이용되고 있으며, 특히 불순물의 함량이 적은 고품위 실리카는 전자소재인 LCD 및 OLED 등의 원재료로 큰 주목을 받고 있다. 본 연구에서는 물리적 정제방법인 자력선별 방식에 의한 실리카의 고순도화 연구를 위해 세 가지 형태의 자력 선별기를 고려하여 $SiO_2$와 $Fe_2O_3$를 대상으로 전산모사를 실시하였다. 전산모사 결과, $Fe_2O_3$ 입자를 끌어당길 수 있는 유효면적이 자력선별의 매우 중요한 변수로 작용함을 확인하였으며, $SiO_2$ 입자의 손실율 및 $Fe_2O_3$ 입자의 제거율은 입자의 크기와 유속에 매우 큰 영향을 받음을 알 수 있었다. 본 연구에서는 입자크기 $10{\mu}m$, 유속 0.2 m/s의 조건에서 가장 우수한 분리효율의 확보가 가능하였으며, 자력선별기의 구성에 있어 입자의 크기, 유속, 자속 밀도가 매우 핵심적인 변수임을 증명하였다.

• Restorative Dentistry and Endodontics
• /
• 제37권2호
• /
• pp.79-83
• /
• 2012

Objectives: The purpose of this study was to evaluate the relation between intentionally induced internal stress and cyclic fatigue failure of .06 taper ProFile. Materials and Methods: Length 25 mm, .06 taper ProFile (Dentsply Maillefer), and size 20, 25, 30, 35 and 40 were used in this study. To give the internal stress, the rotary NiTi files were put into the .02 taper, Endo-Training-Bloc (Dentsply Maillefer) until auto-stop by torque controlled motor. Rotary NiTi files were grouped by the number of induced internal stress and randomly distributed among one control group and three experimental groups (n = 10, Stress 0 [control], Stress 1, Stress 2 and Stress 3). For cyclic fatigue measurement, time for separation of the rotary NiTi files was recorded. The fractured surfaces were observed by field emission scanning electron microscope (FE-SEM, SU-70, Hitachi). The time for separation was statistically analyzed using two-way ANOVA and post-hoc Scheffe test at 95% level. Results: In .06 taper ProFile size 20, 25, 30, 35 and 40, there were statistically significant difference on time for separation between control group and the other groups (p < 0.05). Conclusion: In the limitation of this study, cyclic fatigue failure of .06 taper ProFile is influenced by internal stress accumulated in the files.

• 한국자동차공학회논문집
• /
• 제4권5호
• /
• pp.119-129
• /
• 1996

This study is concerned with the critical evaluation of predicative capability of a k-$\varepsilon$ turbulence model using the Renormalization Group(RNG) theory. The present numerical model for solution of the Navier-Stokes System is based on the modified PISO algorithms. Computations have been performed with the RNG-based K-$\varepsilon$ model for the two-dimensional flow over a backward-facing step, a confined coaxial jet, and a swirling flow in a swirl combustor. Numerical results are compared with experimental data in terms of mean flow velocities, turbulent kinetic energy, and turbulent stresses. Numerical results clearly indicate that the RNG-based K-$\varepsilon$ turbulence model shows a significant improvement over a standard K-$\varepsilon$ model in predicting the turbulent flows with flow separation and swirl.

• Journal of Information Technology Applications and Management
• /
• 제23권2호
• /
• pp.195-206
• /
• 2016

Mobile financial services with incorporated into IT are actively introduced and being operated worldwide. Meanwhile, a relationship setting of industrial capital and financial capital has a close connection with development process of the financial markets and the economic development. If the relationship setting of industrial capital and financial capital are right, it will be good opportunity to ensure economic development, positive economic effect and global competitiveness of the financial industry as other developed countries. In order to expand the positive effects of these mobile financial services, a ICT companies, etc. should ease regulations to allow entry to the mobile financial services market. That is, the separation of banking and commerce should be abolished.