• Journal of Oral Medicine and Pain
• /
• v.30 no.4
• /
• pp.457-464
• /
• 2005

The purpose of our study was to investigate whether the intrapulpal temperature during cavity preparation of enamel or dentin with Er:YAG laser still remained in range of safety for dental pulp protection when combined with appropriate water flow rate. The effect of different pulse repetition rates at the same pulse energy during ablation was evaluated as well. Caries-free, restoration-free extracted human molar teeth were prepared for the specimen and divided two experimental groups of enamel and dentin. Each group comprised 5 specimens and each of tooth specimens were embedded into a resin block each and measuring probe was placed on the irradiated pulpal walls. For experiments of dentin ablation, enamel layers were prepared to produce dentin specimen with a same dentin thickness of 2 mm. A pulse energy of Er:YAG laser was set to 300 mJ and three different pulse repetition rates of 20 Hz, 15 Hz and 10 Hz were employed. Laser beam was delivered with 3 seconds and less per application over enamel and dentin surfaces constant sized by $3\;mm{\times}2\;mm$ and water spray added during irradiation was a rate of 1.6 ml/min. Temperature change induced by Er:YAG laser irradiation was monitored and recorded While enamel was ablated, there was no significant difference of temperature related to pulse repetition rates(p=0.358) and temperature change at any pulse repetition rate was negligible. Significant statistical difference in temperature changes during cavity preparation in dentin existed among three different pulse groups(p=0.001). While temperature rise was noticeable when the dentinal wall was perforated, actual change of temperature due to Er:YAG laser irradiation was not enough to compromise safety of dental pulp when irradiation was conjugated with appropriate water spray. Conclusively, it can be said that cavity preparation on enamel or dentin with an Er:YAG laser is performed safely without pulp damage if appropriate volume of water is sprayed properly over the irradiated site.

• Journal of Oral Medicine and Pain
• /
• v.30 no.4
• /
• pp.433-446
• /
• 2005

The purpose of this study was to investigate the sociopsychological factors which might influence the course of the temporomandibular disorders and to develop models for prediction of treatment outcome related to pain, dysfunction and sound. For this study, 268 patients with temporomandibular disorders were selected from the patients presented to department of Oral Medicine, Wonkwang university dental hospital. Chief complaints of these subjects were largely grouped into three categories such as pain, dysfunction and sound, and 10 cm visual analogue scale(VAS) was used to record the state of the three complaints every visit and Treatment Index(VAS TI) was calculated from VAS. All the forty-two items obtained from clinical examination or questionnaire were statistically processed with $SPSS^{(R)}$ windows. The results of this study were as follows: 1. The items showed a difference between male and female subjects were maximum mouth opening, palpation score, jaw jerk during mandibular movement, and sleep disturbance. Among questionnaires such as SRRS, HAD scale and PSQI, the HAD scales showed the most highly significant correlation with the each scale item of the SCL-90R. 2. Among the groups classified by VAS TI, the group with the lowest VAS TI showed the highest VAS score in the start of treatment but showed the lowest score in the end of treatment, without respect to the type of chief complaint. From these results, it is assumed that the active treatment duration for the subjects with lower VAS score in the first visit would be longer than the subjects with higher score with the somewhat poor treatment outcome. 3. With regard to all the three complaints, the items showing significant effect in the model for prediction of treatment outcome were from questionnaire, except one item, maximum mouth opening, which suggest that the sociopsychological factors would be strongly related to development and progress of the symptoms.

• Journal of Life Science
• /
• v.16 no.2 s.75
• /
• pp.339-344
• /
• 2006

The aim of this study was to examine the timing and magnitude of growth spurt in skinfold, body musle and bone related variables aligned on peak height velocity in boys and girls. In the study design, the subjects and the method were used by the cross-sectional investigation. The subjects participated in this study were 7 through 18 years of age belonged to typical primary, junior, senior high school students, and about 250 males and 250 females in each age group. The total subjects were 2,798 males and 2,762 females. All subjects of this study were lived in Pusan metropolitan city, Korea. The growth velocity magnitudes of sum of the four sites sknfold thickness, body musle and bone related variables. Velocity curve chart of physique was the smoothed according to an approximation of splines by the Sigma Plot-2001 graphic program. In this study, age at PHV of girls occurred eariler about 2 years than boys. In sum of four sites skinfold thickness, PV occurred -2 years from PHV in boys, and PV occurred +2 years from PHV in girls, respectively. In humerus breadth, two PV occurred before and after PHV in boys, whereas PV occurred -1 year from PHV in girls, respectively. In femur breadth, PFV and PHV appeared to occure the same time in boys, PV occurred -2 years from PHV in girls, respectively, In arm circumference, PV occurred after PHV in both sexes. In calf circumference, PV occurred +2 years from PHV in boys, PCCV and PHV appeared to occure the same time in girls, respectively. In magnitudes of peak velocity of body height, humerus breadth, femur breadth, arm circumference and calf circumfence, boys obtained higher than girls, on the other hand, girls obtained higher than boys in sum of four sites skinfold variable. we need to longitudinal and scientific investigation by Korean government level in adolescent growth spurt study, because childhood and adolescence achive higher positive physical education effect than the other ages.

• Journal of Life Science
• /
• v.18 no.2
• /
• pp.241-248
• /
• 2008

This study has been carried out to secretion antibodies for the purpose of preventing the infection of Helicobacter pylori and using them as a supplement for treatment. This experiments have been separated antigens from H. pylori and observed into antibody production and the agglutination of H. pylori for the separated antigens. As major antigenic proteins separated from H. pylori, the following could be verified: 12 kinds of band for whole cell (WC), seven kinds of band for outer membrane protein (OMP), three kinds of band for crude urease, and one kind of band for lipopolysaccharide (LPS). The IgG anti-H. pylori antibody of separated antigens showed $77.9{\pm}6.4{\mu}g/ml$ for we (L), $84.9{\pm}6.4{\mu}g/ml$ for OMP, and $123.8{\pm}2.9{\mu}g/ml$ for crude urease, at the same antigen concentration of $20{\mu}g/100ull$, which showed the most at the crude urease. And it turned out that the IgA antibodies were generated with $2.5{\pm}0.32{\mu}g/ml$ for WC (L), $2.0{\pm}0.43{\mu}g/ml$ for OMP, and $1.3{\pm}0.25{\mu}g/ml$ for crude urease, which demonstrated the most for WC (L) antigens. As a result of verifying the immunogenecity of antigenic protein through the Western blotting, major antigenic substances could be confirmed as follows: 10 kinds for WC, six kinds for OMP and three kinds for crude urease. The agglutination values on the H. pylori of the antibody were $2^5,\;2^5,\;2^6\;and\;2^7$ at the antigen serums of anti-WC (H), anti-WC (L), anti-OMP and anti-crude urease, respectively, which indicated the highest for the antigen serum of anti-crude urease. The urease activation-inhibiting absorbance of antigen serum created by each antigen was $0.14{\pm}0.01$ for WC (H), $0.16{\pm}0.01$ for WC (L), $0.18{\pm}0.03$ for OMP, and $0.18{\pm}0.04$ for urease, demonstrating a significant inhibiting effect, compared with $0.26{\pm}0.02$ of the control group.

• Journal of Food Hygiene and Safety
• /
• v.22 no.3
• /
• pp.223-230
• /
• 2007

We have previously reported that green tea catechins(GTC) displayed potent antithrombotic effect, which was due to the antiplatelet activity. In the present study, the antiplatelet activity of each green tea catechin components was compared in vitro. Galloylated catechins including (-)-epigallocatechin gallate (EGCG), (-)-gallocatechin gallate (GCG), (-)-epicatechin gallate (ECG) and (-)-catechin gallate (CG), significantly inhibited collagen $(5{\mu}g/mL)-induced$ rabbit platelet aggregation with $IC_{50}$ values of 79.8, 63.0, 168.2 and $67.3{\mu}M$, respectively. EGCC GCG and CG also significantly inhibited arachidonic acid (AA, $100{\mu}M$)-induced rabbit platelet aggregation with $IC_{50}$ values of 98.9, 200.0 and $174.3{\mu}M$, respectively. However catechins without gallate moiety showed little inhibitory effects against rabbit platelet aggregation induced by collagen or AA compared with galloylated catechins. These observations suggest that the presence of gallate moiety at C-3 position may be essential to the antiplatelet activity of catechins and the presence of B ring galloyl structure may also contribute to the antiplatelet activity of GTC. In line with the inhibition of collagen-induced platelet aggregation, EGCG caused concentration-dependent decreases of cytosolic calcium mobilization, AA liberation and serotonin secretion. In contrast, epigallocatechin (EGC), a structural analogue of EGCG lacking a galloyl group in the 3' position, although slightly inhibited collagen-stimulated cytosolic calcium mobilization, failed to affect other signal transductions as EGCG in activated platelets. Taken together, these observations suggest that the antiplatelet activity of EGCG may be due to inhibition of arachidonic acid liberation and inhibition of $Ca^{2+}$ mobilization and that the antiplatelet of EGCG is enhanced by the presence of a gallate moiety esterified at carbon 3 on the C ring.

• The korean journal of orthodontics
• /
• v.35 no.1 s.108
• /
• pp.60-68
• /
• 2005

The evaluation of malocclusion has to be done quantitatively and qualitatively. This will be lead toward an analysis of malocclusion severity as well as treatment difficulty. The method of proper evaluation of malocclusion severity and treatment difficulty is necessary to assess treatment effect and efficiency for the orthodontists and to establish fundamentals for planning and executing the health-related policies in private and public institutions. The purposes of this study as the first part of the objective and quantitative analysis of malocclusion were 1) to measure treatment difficulty based on the opinions of several orthodontists. and 2) to investigate the relationships between objective malocclusion severity and subjective treatment difficulty 100 pairs of dental casts that had various types and severity of malocclusion were selected from the orthodontic departments of Kyurghee University and Samsung Medical Center The objective malocclusion severity was measured with the PAR (Peer Assessment Rating) index and the subjective treatment difficulty was evaluated by 8 experienced orthodontists. The relationships between objective malocclusion severity and subjective treatment difficulty were statistically evaluated. There were significant relationships between objective malocclusion severity and subjective treatment difficulty especially in the measurements of the upper anterior alignment, the buccal occlusion. the overjet, the overbite and the midline discrepancy en the malocclusion components. The results of this study can provide the background knowledge to develop a new occlusal index. which contains both the malocclusion severity and treatment difficulty for Korean orthodontists.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.1
• /
• pp.36-43
• /
• 2012

Purpose: To analyze the stress distribution of the implant and its supporting structures through 3D finite elements analysis for implants with different hexagon heights and to make the assessment of the mechanical stability and the effect of the elements. Materials and methods: Infinite elements modeling with CAD data was designed. The modeling was done as follows; an external connection type ${\phi}4.0mm{\times}11.5mm$ Osstem$^{(R)}$ USII (Osstem Co., Pusan, Korea) implant system was used, the implant was planted in the mandibular first molar region with appropriate prosthetic restoration, the hexagon (implant fixture's external connection) height of 0.0, 0.7, 1.2, and 1.5 mm were applied. ABAQUS 6.4 (ABAQUS, Inc., Providence, USA) was used to calculate the stress value. The force distribution via color distribution on each experimental group's implant fixture and titanium screw was studied based on the equivalent stress (von Mises stress). The maximum stress level of each element (crown, implant screw, implant fixture, cortical bone and cancellous bone) was compared. Results: The hexagonal height of the implant with external connection had an influence on the stress distribution of the fixture, screw and upper prosthesis and the surrounding supporting bone. As the hexagon height increased, the stress was well distributed and there was a decrease in the maximum stress value. If the height of the hexagon reached over 1.2mm, there was no significant influence on the stress distribution. Conclusion: For implants with external connections, a hexagon is vital for stress distribution. As the height of the hexagon increased, the more effective stress distribution was observed.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.45 no.3
• /
• pp.271-279
• /
• 2018

Previous studies to elucidate the etiology of cyclosporine(Cs)-induced gingival overgrowth in children have not completely excluded all factors that may cause differences among individuals. This study examined the effect of cyclosporine on the metabolism of type 1 collagen(CoL-I) in experimental models that controlled the effects of biological variations on individuals. Five 5-week-old male Sprague-Dawley rats were administered Cs by gastric feeding for 6 weeks. Gingival specimens were harvested from the mandibular posterior area before beginning Cs administration and at 2, 4, and 6 weeks thereafter. Gingival fibroblasts were cultured from all the 20 biopsies collected from the gingiva. Half of the fibroblasts collected prior to the Cs administration were designated as Control. The other half of the fibroblasts were treated with Cs in vitro and called in vitro test group(Tt). The fibroblasts collected 2, 4, and 6 weeks after the Cs administration were called in vivo test groups : T2, T4, T6, respectively. Immunofluorescence microscopy was used to detect CoL-I in all the fibroblasts. CoL-I was analyzed at both the gene and protein expression levels by real-time polymerase chain reaction and western blotting. Changes in CoL-I before and after Cs treatment were evaluated from the gingiva of each rat. There was no significant difference in gene expression of CoL-I in the control and test groups. CoL-I protein expression levels of fibroblasts increased in in vitro Cs treatment for each individual, and also increased in in vivo Cs treatment. In this study, the experimental method that control biological variations that can occur due to differences among individuals was useful. Subsequent studies on other factors besides CoL-I and in-depth studies in humans are needed.

• Journal of Radiation Protection and Research
• /
• v.39 no.1
• /
• pp.38-45
• /
• 2014

This paper describes the results of assessment of radiological dose resulting from operation of the Daedeok nuclear facilities including the HANARO research reactor, which has been performed to assure whether or not to comply with the regulation standards of the radioactive effluents releases. Based on the meteorological data and the radiation source term, the maximum individual doses were evaluated from 2010 to 2012. The atmospheric dispersion and the deposition factors of gaseous effluents were calculated using the XOQDOQ computer code. ENDOS-G and ENDOS-L code systems were also used for maximum individual dose calculation from gaseous and liquid effluents, respectively. The results were compared with the regulation standards for the radioactive effluents presented by the Nuclear Safety and Security Commission (NSSC). The effective doses and the thyroid doses of the maximum individual were calculated at the maximum exposed point in the Daedeok site, and contributions of exposure pathways to the radiological doses resulting from gaseous and liquid radioactive effluents were evaluated at each facility of the Daedeok site. As a result, the maximum exposed age was analysed to be the child group, and the operation of HANARO research reactor had a major effect more than 90% on the individual doses. The main exposure pathways for gaseous radioactive effluent were from ingestion and inhalation. The effective doses and the thyroid doses were considerably influenced by tritium and iodine, respectively. The gaseous radioactive effluents contributed more than 90% on the total doses, whereas the contributions of the liquid radioactive effluents were relatively low. Consequently, the maximum individual dose due to radioactive effluents from the nuclear facilities within the Daedeok site were less than 3% of the regulation standard over 3 years; therefore, it can be concluded that radioactive effluents from the nuclear facilities were well managed, with the radiation-induced health detriment for residents around the site being negligible.

• Journal of The Korean Association For Science Education
• /
• v.32 no.1
• /
• pp.95-112
• /
• 2012

The research evaluated the effects of the improvements in scientific inquiry for elementary school students and focused on the development and application of the explicit and reflective learning strategy through observation and classification. The explicit and reflective learning strategy was modified and completed with the review of the experts after the development of the draft based on the theoretical approach. The students were evaluated for their academic achievements in scientific inquiry skills before and after taking the course. The results were as follows: First, the steps of the developed learning strategy (1) to motivate, (2) to explore reflectively, (3) to guide explicitly, (4) to inquire explicitly, and (5) to verify reflectively were set to reflect the verification. Second, the results of applying the developed model to the lessons based on the quantitative analysis was effective for observation and classification skills in the quest for improved performance of the whole (the sum of observation and classification, inquiry skills) and the observed features, but there was no effect on classification. Also, the lessons applied the developed teaching strategy and showed effectiveness in improving academic achievement. Particularly in analyzing the relationship between the academic achievement and exploration capabilities, in order to improve academic achievement, the importance of improving inquiry skills was found. Third, the qualitative analysis of teaching and learning strategy developed by applying the lessons of this teacher guide and small group activities through the explicit and reflective observation and classification of the student learning activities showed the significant improvement of ability of the scientific inquiry skills. In addition to the improvement in the abilities of the classification showed after the formation of the most basic observation skills of the scientific inquiry.