• Journal of the Korean institute of surface engineering
• /
• v.47 no.3
• /
• pp.128-136
• /
• 2014

In the present study, we successfully developed an eco-friendly chemical etching solution and proper condition for plating on ABS material. The mechanism of forming Ni plating layer on ABS substrate is known as following. In general, the etching solution used for the etching process is a solution of chromic acid and sulfuric acid. The etching solution is given to the surface resulting in elution of butadiene group, so-called anchor effect. Such a rough surface can easily adsorb catalyst resulting in the increase of adhesion between ABS substrate and Ni plating layer. However a use of chromic acid is harmful to environment. It is, therefore, essential to develop a new alternative solution. In the present study, we proposed an eco-friendly etching solution composed of potassium permanganate, sulfuric acid and phosphoric acid. This solution was testified to observe the surface microstructure and the pore size of electrical Ni plating layer, and the adhesive correlation between deposited layers fabricated by electro Ni plating was confirmed. The result of the present study, the newly developed, eco-friendly etching solution, which is a mixture of potassium permanganate 25 g/L, sulfuric acid 650ml/L and phosphoric acid 250ml/L, has a similar etching effect and adhesion property, compared with the commercially used chromium acid solution in the condition at $70^{\circ}C$ for 5 min.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.1666-1672
• /
• 2008

In this study, it collected and analyzed a construction case of the improved top-down support system application field on a case by case retaining wall method. The behavior of horizontal displacement was analyzed according to retaining wall type after reviewing a design stage and estimated horizontal displacement under the construction. The study results showed that it is judged stable until excavation termination irrelevant to a retaining wall method at the improved top-down support system application. It is judged that the settlement of behind ground can minimize because the retaining wall head displacement also behave stably. It was compared the predicted horizontal displacement in design and the measured horizontal displacement acquired through a measurement by using Elasto-Plastic analysis program. The comparison results showed that a similar horizontal displacement was predicted within stability standard irrelevant to a retaining wall method. So, it is decided that the advanced prediction is reasonable by Elasto-Plastic analysis in design applied the improved top-down support system. In the case of the ground anchor method application under a same condition, it is decided that a horizontal displacement will more increase than the improved top-down support system is applied. If a section condition is same, it was decided that to apply top-down support system is more stable than that.

• Journal of the Korean Society of Safety
• /
• v.10 no.3
• /
• pp.96-105
• /
• 1995

The better industry develops, the more spaces need but in the limited area. Most building become larger and more complicated if the more spaces need in the constant area. And this leads to do underground work in long period generally six(6) months for 6 basement stories due to the selection of TOP DOWN technique. Working environment in this underground area can be problems and should not be overlooked, because air quality in underground spaces become quickly worse. Recently, department name to control construction safety has been changed to ENVIRONMENT & SAFETY TEAM from SAFETY TEAM. This means that it is very important to control against environmental condition at site so much. Overall construction work as well as underground work should conform to the requirement of working environment, particularly against inhabitants around the construction area. Strut protection, one of earth protection method, in case to 40m long strut may become weaker due to thermal stress or its longitudinally compressive strain and the another one, earth anchor protection may not be applied to the site In case of encroaching on vertical underground borderline because of regulation to prohibit it. It is necessary that TOP DOWN technique should be introduced in order to solve the external and internal problem of the site such as difficulty level of the work, potential danger with excavating depth, and shortening workperiod. It is needed that improving way of working condition should be shown and simplified computer simulation program should be also provided for checking pollution level & ventilation, excluding of lighting problem here. Results measured with conformance to the Regulation for Working Environment Measurement, enforced by Ministry of Labor have been applied to the computer program developed here. Sample air taken at unit workplace which was considered as exposing condition of pollutant at breathing point and within a range of behavior of the workers, Identified exposing group in underground work, using Moded Flow Life Finally, three types of ventilation system, type I with blower & ventilator, type II natural supply with mechanical ventilation system, and type I mechanical ventilation with Drivent Fan Unit System are selected for this study.

• Journal of the Korean Institute of Educational Facilities
• /
• v.24 no.4
• /
• pp.15-24
• /
• 2017

This paper aims to investigate in what extent subject-centered clusters are different from one another in terms of message system, which is composed of curriculum, pedagogy and evaluation. For this, Bernstein's pedagogic transmission code(i.e., classification and framing) and school typology(i.e., open-type or close-type) have been explored, and then applied into Shimin Junior School, Japan, in order to find out substantial characteristics between subject-centered clusters. In this case study, VGA(visibility graph analysis), as one of syntactical methodologies in space syntax theory, has been used to measure to what degree they are actually different. Throughout in-depth investigation of spatial configurations, it can be said that the square of clusters is strongly connected and integrated very well, so that it acts as an anchor place for school life within a cluster. However, it works in different ways according to message systems. In the subjects like Japanese and Science whose message system are characterized by strong classification and strong framing, integration values are relatively low, and this means that it is hard to expect cross-referencing activities through the subject squares. On the contrary, the subject of Social Studies defined by weak classification and weak framing shows the highest mean integration values, and this can be expected that there are inter-changeable learning activities in the square.

• Geomechanics and Engineering
• /
• v.37 no.3
• /
• pp.293-306
• /
• 2024

Influenced by the alternating effects of dynamic and static pressure during the mining process of close range coal seams, the surrounding rock support of cross mining roadway is difficult and the deformation mechanism is complex, which has become an important problem affecting the safe and efficient production of coal mines. The paper takes the inclined longwall mining of the 10304 working face of Zhongheng coal mine as the engineering background, analyzes the key strata fracture mechanism of the large inclined right-angle trapezoidal mining field, explores the stress distribution characteristics and transmission law of the surrounding rock of the roadway affected by the mining of the inclined coal seam, and proposes a segmented and hierarchical support method for the cross mining roadway affected by the mining of the close range coal seam group. The research results indicate that based on the derived expressions for shear and tensile fracture of key strata, the ultimate pushing distance and ultimate suspended area of a right angle trapezoidal mining area can be calculated and obtained. Within the cross mining section, along the horizontal direction of the coal wall of the working face, the peak shear stress is located near the middle of the boundary. The cracks on the floor of the cross mining roadway gradually develop in an elliptical funnel shape from the shallow to the deep. The dual coupling support system composed of active anchor rod support and passive U-shaped steel shed support proposed in this article achieves effective control of the stability of cross mining roadways, which achieves effective control of floor by coupling active support and preventive passive support to improve the strength of the surrounding rock itself. The research results are of great significance for guiding the layout, support control, and safe mining of cross mining roadways, and to some extent, can further enrich and improve the relevant theories of roof movement and control.

• Clinics in Shoulder and Elbow
• /
• v.6 no.1
• /
• pp.72-79
• /
• 2003

Purpose: To compare the results of arthroscopic rotator cuff repair and subacromial decompression in partial thickness rotator cuff tear (PTRCT) with those in full thickness rotator cuff tear (FTRCT). Subjects and method: Of the 46 patients who were rested of the rotator cuff tear based on the operational findings, 42 patients who were able to receive a serial follow-up for 2 years were selected as the study subjects. The average age of the patients at the time of the operation was 55 years, and the mean duration of the follow-up was 34 months. The subjects included 22 cases of PTRCT and 20 cases of FTRCT. In terms of rotator cuff repair, the average number of tendon to tendon repair (TTR) was 1 in both PTRCT and FTRCT, and that of tendon to bone repair (TBR) was 1 and 3 in PTRCT and FTRCT, respectively. The average number of use of suture anchor was 1 and 2 in PTRCT and FTRCT, respectively. The level of shoulder pain and function of the subjects were measured using shoulder functional evaluation score of American shoulder and elbow society (ASES score) at before and 2 years following the operation. Results: At the final follow-up following the operation, PTRCT group showed changes in scores from 7.2 to 0.9 on average pain score and 34 to 91 on ASES score, whereas FTRCT group showed changes in scores from 7.6 to 1.2 on pain score and 29 to 88 on ASES score. There were no significant differences between the two groups (P > 0.05). The average range of motion of shoulder significantly increased in both groups at the final follow-up in comparison with the pre-operative time point. The evaluation at the final follow-up showed that 93% of the total subjects showed good or excellent results, and 95％ showed satisfactory results from the procedure with regard to pain reduction and functional outcomes. Two cases of the 3 fair results were caused by acromioclavicular arthritis. Conclusion: It may be anticipated that arthroscopic rotator cuff repair and subacromial decompression may bring satisfactory post-operative outcomes in both PTRCT and FTRCT on pain relief and functional recovery. However, careful preoperative examination of the acromioclavicular joint is critical to avoid failures of these procedures.

• Journal of the Korean Chemical Society
• /
• v.29 no.5
• /
• pp.522-532
• /
• 1985

The reactions of p-nitrophenyldiphenylphosphate (p-NPDPP) with anions of benzimidazole (BI) and its 2-alkyl derivatives (R-BI) are strongly catalyzed by the micelles of cetyltrimethyl ammonium bromide (CTABr). On the other hand, the first order rate constants $(k'_{R-BI^-})$ and the second order rate constants $(k_{m(R-BI^-)})$ of the reactions mediated by R-$BI^-$in the micellar pseudophase are much smaller than those mediated by $BI^-$. In order to explain the slower rates of the micellar reactions mediated by R-$BI^-$, we compared the concentration-ratios ([R-$BI^-$]/[$BI^-$]) with the first order rate constant-ratios $(k'_{R-BI^-}/k'_{BI^-})$ and the second order constant-ratios $(k_{m(R-BI^-)}/k_{m(BI^-)})$ for the reactions taking place in the micellar pseudophase. The rate constant-ratios were much smaller than the concentration-ratios. For example in a 5 ${\times}10^{-4}$M butyl-BI solution, the two ratios were 0.089 and 0.430 (for the first order) respectively, and in a $10^{-4}$M butyl-BI solution the former was 0.100 (for the second order). This predicts that the reactivities of R-$BI^-$ in the micellar pseudophase are much smaller than that of $BI^-$. Based on the values of several kinetic parameters measured for dephosphorylation of p-NPDPP mediated by R-$BI^-$, a schemetic model is proposed. Due to the hydrophobicity and the steric effect of the alkyl substituents, these groups would penetrate into the core of the micelle for stabilization by van der Waals interaction with long cetyl groups of CTABr. Consequently, the movements of R-$BI^-$ bound to the micelle should be restricted, leading to decreased collison frequencies between the nucleophiles and p-NPDPP. We refer this as an "anchor effect". This effect became more predominent when a larger alky group in R-BI was employed and when a greater concentration of R-BI was used.

• Clinics in Shoulder and Elbow
• /
• v.15 no.1
• /
• pp.16-24
• /
• 2012

Purpose: This study was designed to investigate the rate of incidence, location and the clinical value of the rotator cuff retear by analyzing MRI scans, which was taken after an arthroscopic rotator cuff repair. Materials and Methods: This study included a total of 109 patients, who underwent a shoulder MRI scan after an average of 10.6 months later from the arthroscopic rotator cuff repair. We only defined the 'retear' when the Sugaya type IV and V was observed in the sagittal section of the MRI. The location of the retear was divided into the medial and lateral areas by the site, which was 1 cm medial to the anchor insertion. We investigated the incidence rate and the location of the retear, in terms of the age, sex, initial tear size and the suture method. Also, we compared the functional score of the retear group and the non-retear group, after an average of 13.9 months follow-up. Results: There were 38 of the 109 patients that showed the rotator cuff retear. Of these patients, 25 were male patients, and 13 were female patients. Of the 38 patients with the rotator cuff retear, 21 patients were included in the <3 cm retear group, and 17 were included in the ${\geqq}3$ cm retear group. At the end of the follow up period, all 109 patients showed a statistical significant improvement in the shoulder functional score. Conclusion: According to the follow up of the MRI scan, which was taken after the rotator cuff repair, the retear rate reached 34.9 %, and there were no significant differences on the age and the suture method. More rotator cuff retear occurred in male patients, and the initial tear size was positively correlated with the incidence rate of the rotator cuff retear. Also, the retear was more frequently observed at the medial side. That is because when the suture was performed, excessive tension was loaded on the medial side of the suture site.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.4
• /
• pp.316-322
• /
• 2012

In the port of Ulsan with the area of harbor limit of $83km^2$, 25,432 vessels have been entering annually and only 35 vessels can anchor simultaneously at the anchorage. The area of harbor limit of Ulsan constitutes just 65 percent compared to $127.5km^2$ which is an average of main ports in Korea. In this regard, the port of Ulsan needs to expand the area of anchorages inevitably for enhancing the efficiency of port operation. To select the best anchorage area in Mipo harbor with the introduction of a concept of emergency anchorage, this study analyzed the safety of navigation and anchorage, and safety management, etc. in the prospected anchorage on the basis of the marine traffic survey observing traffic density. Furthermore, after drawing preliminary and final schemes through gathering the opinions from maritime users, safety management organizations and academic experts group, the best arrangement of emergency anchorage has been selected through the conference of interested parties. Then, the final scheme was also verified through figuring out the marine traffic system and carrying out the ship handling simulation.

• Korean Journal of Ichthyology
• /
• v.18 no.4
• /
• pp.339-346
• /
• 2006

In this study we conducted artificial hybridization between two sibling species, Rhodeus uyekii and R. notatus, and observed the morphological characteristics in early developmental stage. The two species showed difference in egg shape having rhombus and club respectively. The morphology of yolk of larva just hatched also showed well specific characteristics, that is the bean chaff type for R. uyekii (U type) and anchor type for R. notatus (N type). The rate of fertilization between female R. uyekii and male R. notatus (UN type) and between female R. notatus and male R. uyekii (NU type) were complete and its hatching rate were very high, 71.6% for UN type and 97.5% for NU type. The differences occurred in the yolk shape of hatched larvae for each combination of hybrids. In the group of UN, U type of larvae were found very rarely, but almost all the larvae showed intermediate shape polarized to NN type. Similar phenomenon was observed in the NU having intermediate polarized to UU, but without any NN type. These hybrids will be analyzed for their external morphology, sex ratio, the function of sexual organ and karyology after they grown up to adult.