• 한국전자파학회논문지
• /
• 제25권2호
• /
• pp.208-216
• /
• 2014

달 탐사 미션 수행을 위한 지상국은 달 궤도선과 착륙선의 상태 정보 및 관측한 센서 데이터를 수신할 수 있어야 한다. 이러한 지상 시스템 개발 초기 단계에서는 정확한 링크 파라미터에 의한 링크 분석을 통해 지상 안테나의 크기 및 시스템 잡음 성능이 도출되어야 한다. 한편, 지상 안테나가 달 궤도선과 착륙선과 통신을 할 경우에 달을 지향하게 되고, 이 때 달은 자체 밝기에 의해 안테나의 수신 성능을 열화 시키는 잡음으로써 동작한다. 본 논문에서는 안테나가 달을 지향할 때 발생되는 수신 성능 열화에 대한 분석 결과를 제시한다. 결과 검증을 위해 달에 의한 안테나 잡음 온도를 우선 계산 한 후에 이를 본 논문에서 제안하는 시험 방식의 결과와 비교하였고, 그 결과는 허용 오차 수준에서 일치함을 확인하였다. 이는 달에 의한 안테나 잡음 온도의 계산 방식이 정당함을 검증한 것이므로 이 방식을 통하여 다양한 주파수와 안테나의 크기에 따른 달 탐사 지상 안테나의 수신 열화 분석을 수행할 수 있었다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.634-636
• /
• 2003

Satrec Initiative (Si) is developing a ground processing system for Synthetic Aperture Radar (SAR) data. SAR provides its own illumination and is not dependent on the light from sun, thus permitting continuous day/night operation and all-weather imaging. The system is capable of producing standard level products from SAR signal. Hence, the system should be able to perform matched filtering, range compression, azimuth compression, multi-look image generation, and geocoded image generation. This paper will describe the processing steps including algorithms, design, and accuracy of the Si's SAR processing system by comparing with commercial software.

• 한국소음진동공학회논문집
• /
• 제20권10호
• /
• pp.968-975
• /
• 2010

The high interest for the ground vibrations which is caused by the train service is risen. When the trains are passed, a serious force is applied to ground and the caused vibration is propagated to the area of the building by the ground and rocks. This vibration comes to feel in the residents with the direct vibration, it is radiated in sound. The caused vibration and radiated sound affect the human's life, and this vibration brings about the operation interruption of the equipment which is sensitive to the vibration, or will bring about the structural damage of the building. In this study, the effect of the vibrations caused by the passing trains on the railway station and buildings is investigated by vibration measurement. Indoor and outdoor measurement is carried out by each trains.

• 항공우주기술
• /
• 제13권1호
• /
• pp.37-43
• /
• 2014

저궤도 위성을 운영하는 지상국에서는 10분 내외의 교신 시간 동안 위성의 건강 상태를 확인한 후 영상 촬영을 위한 임무 명령을 전송하거나 촬영한 영상을 수신한다. 제한된 교신 시간동안 매일의 임무를 위한 일련의 절차를 완료하기 위해 위성 및 지상국 시스템에서는 적절한 수준의 자율성이 적용되어 있다. 예를 들어 위성의 자세 및 궤도를 유지하기 위한 제어 로직은 운영자의 개입 없이도 오랜 시간동안 자동으로 수행되어야 하므로 높은 자율성을 갖는 부분이다. 이와는 대조적으로 위성의 고장 관리 로직의 경우 고장 상황 인지 및 안전 조치는 위성에서 자동으로 수행되지만 대체적으로 고장의 원인 판단 및 복구 절차는 지상에서 수행하도록 설계하므로 상대적으로 낮은 자율성을 갖는 부분이라 할 수 있다. 위성의 자율성 수준은 지상국 운영에도 영향을 준다. 지상국에서는 촬영 임무를 위한 일련의 명령 세트 등을 생성한다. 위성이 좀 더 높은 수준의 자율성을 갖는다면, 지상국에서 수행하는 동작의 일부를 위성에서 수행할 수 있을 것이며 지상국의 절차를 간소화할 수 있을 것이다. 이 논문에서는 위성의 자율성 수준에 대해 논의하고 적절한 자율성 수준을 위한 설계 개념을 제안한다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.810-814
• /
• 2002

According to the image level definition for KOMPSAT-2 in KOMPSAT-2 Ground Station Specification, the level 0 is frame formatted, unprocessed data at full resolution; any and all communications artifacts (e.g., synchronization frames, communications headers) removed. The level 0 is used for two purposes: 1) exchange of imagery between image receiving & processing element (IRPE), and 2) image transfer from the Receiving & Archiving Subsystem to Search & Processing Subsystem. On-board processing of imagery data of KOMPSAT-2 includes JPEG-like compression and encryption besides conventional CCSDS packetization. The encryption is used to secure imagery data from any intervention during downlink and compression allows real-time downlink of image data reducing data rate produced from the camera. While developing ground receiving system for KOMPSAT-2, it was necessarily to define level 0 products. In this paper, we will suggest level 0 product definition for KOMPSAT-2 and explain reasons of the decisions made. The key factor used while defining the level 0 products is the efficiency of whole ground receiving system. The latter half of the paper will explain the implementation of software that generates level 0 products. The necessary steps to produce level 0 products will be explained, and the performance achieved will be presented.

• 한국농공학회논문집
• /
• 제53권6호
• /
• pp.51-58
• /
• 2011

The objective of this study is to identify whether or not the ground water level is decreasing. We suggest a method of estimating the change in groundwater level using newly developed groundwater pumping station data. The Goseong area located in Gyeongnam province was selected considering three factors. First, this area demands relatively large amount of irrigation water because most of the land is used as a paddy field and the proportion of the paddy field within total arable land is increasing. Second, groundwater level data in nearby area are available since these are monitored by Water Management Information System (WAMIS). Third, many groundwater pumping stations have been developed in this area in order to overcome droughts thus detail information for pumping stations are available. Regression results indicate groundwater level has been decreased for over 20 years. This decreasing trend is due to the shortage of surface irrigation water which was caused by the decrease in rainfall.

• 한국환경보건학회지
• /
• 제38권6호
• /
• pp.529-540
• /
• 2012

Objective: This research was performed to evaluate the state of oil pollution in an area surrounding a railway station that has over 100 years of business history as a railway station in S City, Korea. The amount of polluted soil was estimated, and the target area for remediation was assessed in this study to restore the oil-polluted area. Methods: To accomplish this aim, five observation wells were installed for the sampling of groundwater, and soil was sampled at 33 points. Electric resistance studies and a trench investigation were undertaken to understand the geological conditions of the site, and the groundwater movement in this area was simulated by MODFLOW. Physiochemical analyses were conducted to determine the quality of the groundwater and the current state of oil pollution influenced by that of the soil. Results: The mean level of total petroleum hydrocarbons (TPHs) in this area was 1,059 mg/kg, and the area for remediation was determined to be 7,610 mg/kg. Levels of benzene, toluene, ethylbenzene, and xylene (BTEX) were determined to be under the legal standard. Conclusion: In terms of depth, the biggest area polluted by TPH found was between 0 and 1 m from ground level, and the affected area was 5,900 $m^3$. TPHs were not detected in groundwater. Diesel and lubricating oil were the main causes of TPH pollution at this railway station.

• International Journal of Railway
• /
• 제7권3호
• /
• pp.71-79
• /
• 2014

Subway systems have been a proved method of public transport and are widely used in major cities around the world. However, the time and cost it takes to construct such systems are very high, as it requires underground tunnels. Cities in various countries have implemented monorail systems as public railway transport as it can be more economical and quicker compared to subway systems in terms of construction. In addition, it provides more convenience towards the public as it is not affected to traffic, and also provides an aerial view of the city. However, the overall construction cost for monorail systems is still significantly high, and as a possible solution to further reduce the overall cost, implementation of ground-level stations and wireless power transfer technology has been proposed in this paper. A concept application layout of ground-level stations and wireless power transfer systems has been discussed, using the Daegu monorail Line 3 system as a simulation base. The expected cost for monorail systems implementing ground-level stations and/or wireless power transfer technology has been estimated based on literature survey, and was compared with the current construction cost of Daegu monorail system. Based on comparison, it has shown that implementation of ground-level stations are the most economical, and can be easily implemented for either starting or expanding the monorail line. Implementation of wireless power transfer technology is also economical, but is more feasible when starting a new monorail line as it requires components which will alter the configuration of the train and infrastructure.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.784-787
• /
• 2006

Dual-polarized transmission is one of the effective methods to transmit such a high speed data thanks to two independent channel leads to the orthogonal feature between RHCP (Right-Hand Circular Polarization) and LHCP (Left-Hand Circular Polarization). However, in practical case, the transmitted signal by RHCP polarized antenna in satellite can be occurred at the output port of LHCP polarized antenna in ground station, vice versa. XPD (Cross-Polarization Discrimination) is the ratio of the signal level at the output of a receiving antenna that is nominally co-polarized to the transmitting antenna to the output of a receiving antenna of the same gain but nominally orthogonally polarized to the transmitting antenna. In this paper, the detailed estimation of XPD within the interface between satellite and ground station is written and the influence of XPD to link performance is also described.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.280-282
• /
• 2003

The downlink data rates of the space-born payloads such as high-resolution optical cameras, synthetic aperture radars (SAR) and hyper-spectral sensors are being rapidly increased. For example, the image transmission rates of KOMPSAT-2 MSC(Multi-Spectral Camera) is 320Mbps even if on-board image compression scheme is used.[1] In the near future, the data rates are expected to be a level 500${\sim}$600Mbps because the required resolution will be higher and the swath width will be increased. This paper describes many techniques they enable 500Mbps data receiving and archiving system.