• Transactions on Electrical and Electronic Materials
• /
• 제12권4호
• /
• pp.152-155
• /
• 2011

This paper presents a comparative analysis on step and the touch voltages generated by either a sine and a ring wave voltage generator; this analysis was done as a basic study in order to develop a small and lightweight ground meter. A ring wave generator using pulsed power technology was fabricated; an experimental grounding system specified in Institute of Electrical and Electronics Engineers standards 80 and 81 was installed. The step and the touch voltages, which were measured using comparable a sine and a ring waves in terms of magnitude and frequency, were equal. Using pulsed power technology, the weight of the fabricated ring wave generator could be reduced to one-fifth of that of a sine wave generator. Consequently, if a ground meter adopts the ring wave instead of a sine wave, it will be possible to reduce the weight of a ground meter and improve the efficiency of measurement.

• 한국전기전자재료학회논문지
• /
• 제26권6호
• /
• pp.472-477
• /
• 2013

This paper carried out the comparative analysis on ground impedance of a carbon block and a copper rod. Two types of grounding electrode were compared ; a carbon block (L : 1 m, ${\Phi}$ : 245 mm) buried at a depth of 0.8 m and a three-linked copper rod (L : 1 m, ${\Phi}$ : 10 mm) of equilateral triangles with 1 m spacing. Ground impedance depending on applied current source was evaluated by the application of a sine wave current with 60 Hz ~ 3.5 MHz, a fast-rise pulse with rising time of 200 ns, a standard lightning impulse of $8/20{\mu}s$ and a 600 Hz square wave. Ground impedance for both electrodes were almost the same value below 100 kHz, and increased rapidly afterwards. The maximum ground impedance appeared $400{\Omega}$ at around 1.5 MHz. Ground impedance of the carbon block was lower at the square wave and was higher at fast-rise pulse than that of the copper rod. Also, ground impedance as ages showed no difference for the last 8 months. From the results, it is likely that ground performance for both electrodes shows no difference against commercial frequency and lightning impulse current, while the copper rod shows better performance against a fast-rise pulse with rise-time of a few hundred ns.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1999년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall
• /
• pp.91-98
• /
• 1999

In this study a modified ground strain model is developed for an equivalent earthquake load and is applied to the seismic analysis of buried pipelines, The ground strain can be obtained using the ratio of a maximum ground velocity to a wave propagation velocity. To reflect soil conditions and seismic characteristics the wave propagation velocity is evaluated by a proposed dispersion curve based on wave energy distribution. In order to verify the procedures the observed earthquake data and the results of this study are compared. For the application of an equivalent earthquake load to the seismic analysis the buried pipelines are modeled using the beam theory. the results of the analyses are compared with those of a dynamic analysis code and those obtained from the response displacement method. Finally various parametric studies considering different soil conditions and seismic loads are examined.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2006년도 학술발표회 논문집
• /
• pp.141-148
• /
• 2006

This study describes a generation of artificial earthquake wane compatible with seismic design spectrum. In seismic response analysis of building structures, the input ground accelerations have considerable effect on dynamic characteristics of structures. Therefore, it is important to properly select input ground motions for seismic response analysis. In this paper, the artificial earthquake wave are generated according to previously recorded earthquake waves in past earthquake events. The artificial wave have identical phase angles to the recorded earthquake wane, and their overall response spectra are compatible with seismic design spectrum with 5% of critical viscous damping. Each simulated earthquake wave has a identical phase angles to the original recorded ground acceleration, and match to design response spectra in the range of period from 0.02 to 10.0 seconds. It is concluded that the artificial earthquake waves simulated in this paper ate applicable as input ground motions for a seismic response analysis of building structures.

• 한국해안해양공학회지
• /
• 제19권5호
• /
• pp.408-417
• /
• 2007

최근, 해수욕장으로서의 기능 창출 뿐만 아니라 해안공간의 이용 및 개발에 따른 자연해변의 소실을 대체할 수 있는 인공해변이 건설되고 있다. 그리고, 파랑작용에 의한 매립토사의 유출로부터 인공해변을 보호하기 위한 구조물이 필요하며, 일반적으로 호안이 주로 건설된다. 해저지반 상부에 건설되는 호안의 안정성을 위하여 필히 검토되어야 할 사항 중의 하나가 호안 배후의 지하수위 거동이다. 그러나, 비선형파랑과 지하수위의 거동특성이 인공해변의 토사유출 및 구조물의 안정성에 중요한 요소로 작용함에도 불구하고 이에 대한 연구는 거의 수행되지 않았다. 본 연구에서는 비선형파랑과 호안 및 지하수위로 인한 흐름간의 동적 상호작용을 살펴보기 위하여 정수위와 지하수위와의 차이를 고려할 수 있는 수치파동수로를 개발하였다. 개발된 수치파동수로를 이용하여, 지하수위 변화가 호안 주변 지반내의 수리학적 특성에 미치는 영향을 살펴보았고, 지하수위의 변화에 따른 파동장 및 간극수 흐름, 간극수압 및 와도를 수치적으로 재현하였다. 결과로부터 지하수위의 변화에 따른 호안 주변 지반내의 수리학적 특성들이 어떻게 영향을 받는지 알 수 있었다.

• Journal of Positioning, Navigation, and Timing
• /
• 제3권2호
• /
• pp.83-90
• /
• 2014

In this study, to improve an existing ground-wave based time broadcasting system, a study that predicts the field distribution and field strength of the transmitted signal of a new ground-wave based time broadcasting system was performed. The prediction area was assumed to be the Korean peninsula; and to reflect the mountainous terrain of the Korean peninsula in the prediction of the variations of field distribution and field strength, a new prediction method based on the Monteath model was proposed and utilized. As field distribution changes depending on the position of a transmitter station, potential sites for the transmitter station were selected considering the geographical characteristics. In this regard, the ground conductivity information of North Korea cannot be obtained, and thus, the ground conductivity of the North Korean region was reflected considering the geological characteristics of South Korea and North Korea. Based on this, the variations of field distribution and field strength were predicted by setting the Korean peninsula as the prediction area, and the prediction results depending on the position of the transmitter station were discussed.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1997년도 가을 학술발표회 논문집
• /
• pp.261-266
• /
• 1997

• Earthquakes and Structures
• /
• 제24권1호
• /
• pp.65-79
• /
• 2023

A simplified analytical solution for seismic response of tunnel cross section in horizontally layered ground subjected to oblique incidence of SH wave is deduced in this paper. The proposed analytical solution consists of two main steps: free-field response in layered field and tunnel response. The free field responses of the layered ground are obtained by one-dimensional finite element method in time domain. The tunnel lining is treated as a thick-wall cylinder to calculate the tunnel response, which subject to free field stress. The analytical solutions are verified by comparing with the dynamic numerical results of two-dimensional ground-lining interaction analysis under earthquake in some common situations, which have a good agreement. Then, the appropriate range of the proposed analytical solution is analyzed, considering the height of the layered ground, the wavelength and incident angle of SH wave. Finally, by using the analytical solutions, the effects of the ground material, burial depth of the tunnel, and lining thickness and the slippage effect at the ground-lining interface on the seismic response of tunnels are investigated. The proposed solution could serve as a useful tool for seismic analysis and design of tunnels in layered ground.

• 한국지반공학회논문집
• /
• 제31권11호
• /
• pp.41-48
• /
• 2015

대규모 지반침하 및 지반함몰로 인한 재산, 인명피해를 사전에 예방하기 위하여 지반의 공동 및 이완구간에 대한 조사는 필수적이다. 최근, 지하투과레이더를 이용한 지반침하 및 지반함몰 구간 예측과 관련된 연구가 활발히 진행되고 있으나, 기존의 지하투과레이더 탐사에서는 전기적 임피던스가 서로 다른 층간 경계면 심도만을 산정하므로 조밀한 지반과 느슨한 지반을 서로 반대로 예측하는 오류를 범할 수 있었다. 본 연구에서는, 지하투과레이더로부터 획득된 전자기파의 반사파 특성을 이용하여 이완구간 심도를 추정하고자 하였다. 이완구간에 따른 신호획득을 위하여 과거 침하이력이 있었던 현장을 대상으로 지하투과레이더 탐사가 수행되었으며, 결과의 상호비교 및 검증을 위하여 동적 콘 관입시험이 수행되었다. 전자기파의 반사특성 분석 결과, 지하투과레이더 안테나에서 처음 측정된 신호와 조밀한 지반에서 반사되어 측정된 전자기파는 동일한 위상을 보이며, 느슨한 지반에서 반사되는 경우 안테나에서 처음 측정된 신호와 반대 위상을 보이는 것으로 나타났다. 획득된 지하투과레이더 신호로부터 대상지반의 이완구간 심도 산정 및 동적 콘 관입지수와 상호비교 결과, 지하투과레이더 신호 분석으로부터 산정된 이완구간 또는 조밀한 구간의 심도는 높은 신뢰도로 산정되었다. 본 연구에서 수행된 지하투과레이더 신호획득 및 분석과정은 지반 불연속층의 심도산정뿐만 아니라 이완구간 산정에 활용될 수 있을 것으로 판단된다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.387-394
• /
• 2007

This study area located in HoNam High-Speed railway soft ground section. So it carried out the boring survey, field survey and test of laboratory. It collected the engineering data of ground and the data for the establishment arrangement. The investigation did a soil investigation in Nonsan. The investigation item excuted seismic piezocone penetration test, s-wave seismic refraction survey, ps logging test, density logging test which is a physical exploration and boring. Eventually, results of geotechnical and shear-wave survey are useful for ground information in soft ground that has identified the characteristics of geological responses and elastic modulus.