• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1994년도 가을 학술발표회 논문집
• /
• pp.199-208
• /
• 1994

This paper presents an evaluation of new drill and blast method with two different drilling directions for pilot tunnel enlargement using numerical experiment and field test. To evaluate the effieiency of new tunnel enlargement method, field tests were performed and compared with conventional drill and blast method. Also, three dimensional transient dynamic analysis was made to investigate the effect of the ground vibration when blasting was performed at same position using the equivalent single hole charge.

• Smart Structures and Systems
• /
• 제30권6호
• /
• pp.557-569
• /
• 2022

Vibration-based structural health monitoring (SHM) is crucial for the dynamic maintenance of civil building structures to protect property security and the lives of the public. Analyzing these vibrations with modern artificial intelligence and deep learning (DL) methods is a new trend. This paper proposed an unsupervised deep learning method based on a convolutional autoencoder (CAE), which can overcome the limitations of conventional supervised deep learning. With the convolutional core applied to the DL network, the method can extract features self-adaptively and efficiently. The effectiveness of the method in detecting damage is then tested using a benchmark model. Thereafter, this method is used to detect damage and instant disaster events in a rubber bearing-isolated gymnasium structure. The results indicate that the method enables the CAE network to learn the intact vibrations, so as to distinguish between different damage states of the benchmark model, and the outcome meets the high-dimensional data distribution characteristics visualized by the t-SNE method. Besides, the CAE-based network trained with daily vibrations of the isolating layer in the gymnasium can precisely recover newly collected vibration and detect the occurrence of the ground motion. The proposed method is effective at identifying nonlinear variations in the dynamic responses and has the potential to be used for structural condition assessment and safety warning.

• 대한토목학회논문집
• /
• 제36권5호
• /
• pp.891-901
• /
• 2016

측상구조를 갖는 다변성 지반에서 시행된 3개소 24회의 시험발파로부터 획득한 발파진동 데이터를 지층단면도와 연계하여 제어가 불가능한 지반 특성으로 인한 발파진동 영향을 분석하였다. 화산쇄설층인 클링커층이 불규칙하게 반복되는 층상구조에 대한 발파공학적 경험과 자료의 부족 등으로 충분한 검토가 이루어지지 않은 비효율적인 발파가 이루어지고 있다. 시험발파 지역 내 클링커층의 N값은 매우 다양한 범위로 나타나 정량화하기 매우 어렵다. 그리고 현장의 전체 발파진동 추정식(SRSD)은 감쇠지수 n의 절대값이 설계지침보다 작게 나타나 발파진동이 멀리 전파되었으며, 발파진동상수 K와 감쇠지수 n이 상대적으로 매우 작은 값을 보인 시험발파. 1의 진동특성을 지층단면도로부터 유추한 결과, 연암층 하부에 접한 클링커층 인근까지 발파천공이 진행되어 발파 시 하부에 넓게 분포하고 있는 클링커층으로 폭발 가스압이 손실되었을 것으로 판단된다. 이로 인해 암파쇄량도 절반정도로 감소하였다. 그리고 현장의 주주파수 대역은 일반적인 구조물의 고유 주파수 대역과 유사한 저주파수 대역으로 확인되었다.

• 한국군사과학기술학회지
• /
• 제6권1호
• /
• pp.39-48
• /
• 2003

A GPS translator system is used to get the precise and reliable trajectory data for the high dynamic test vehicles, such as missiles or artillery shells. The missile system with high dynamics, vibration and shock needs to determine its position and velocity in particular. The proposed GPS translator on the test vehicle receives GPS signals, amplifies, down-converts, digitally samples, BPSK modulates, up-converts them to S-band, and then retransmits them to the ground translator processing station. It has doppler variation and signal noise, so design method for resolving them is proposed. The performance of the translator is proved by environmental test and real flight test.

• 한국소음진동공학회논문집
• /
• 제25권4호
• /
• pp.238-246
• /
• 2015

A stepping motor is widely used to operate the elevation and azimuth stage of the X-band antenna with 2-axis gimbal system for effective image data transmission from a satellite to a ground station. However, such stepping motor also generates an undesirable micro-vibration which is one of the main disturbance sources affecting image quality of the high-resolution observation satellite. In order to improve the image quality, the micro-vibration isolation of the X-band antenna system is essential. In this study, the low rotational stiffness isolator has been proposed to reduce the micro-vibration disturbance induced by elevation direction operation of the X-band antenna. In addition, its structural safety was confirmed by the structure analysis based on the derived torque budget. The effectiveness of the design was also verified through the micro-vibration measurement test.

• 한국항공우주학회지
• /
• 제42권11호
• /
• pp.988-995
• /
• 2014

관측위성으로부터 획득된 영상데이터를 지상국에 효율적으로 전송하기 위해 2축 짐벌 형태의 지향성 X-band 안테나가 적용되고 있으며, 안테나의 고속 정밀지향성 확보를 위해 구비된 모터 및 기어 간의 부정확한 맞물림으로부터 발생되는 미소진동은 영상품질 저하의 원인으로 작용한다. 고해상도 관측위성의 지향성능 향상을 통한 고해상도 영상정보 획득을 위해서는 안테나 구동시 발생하는 미소진동이 주요 임무장비에 전달되지 않도록 미소진동 절연이 요구된다. 본 논문에서는 X-band 안테나의 미소진동절연을 목적으로 의탄성 SMA 메쉬와셔 진동 절연기를 제안하였으며, 정하중 시험을 통해 진동 절연기의 기본 특성을 확인하였다. 또한, X-band 안테나의 미소진동 시험을 통해 진동절연기 유무에 따른 진동절연성능을 비교 및 분석 하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.153-160
• /
• 2003

While the interests on the environmental problem during the construction are increasing, the use of low noise-vibration auger-drilled pilling is increasing to solve noise and vibration problem in pilling. Therefore, in Korea, SIP(Soil-Cement Injected Precast Pile) method is mainly used as auger-drilled pilling. However, there is no proper design criteria compatible with the ground condition of Korea, so which is most wanted. To improve and supplement this situation, direct shear tests between SIP pile skin interface and soil were executed on various conditions. Through the analysis of test results, skin resistance characteristics of SIP were investigated thoroughly. Also, the nonlinear unit skin resistance capacity model with SM, SC soil were suggested.

• Structural Engineering and Mechanics
• /
• 제11권3호
• /
• pp.273-286
• /
• 2001

Viscoelastic (VE) dampers have shown to be capable of providing structures with considerable additional damping to reduce the dynamic response of structures. However, the VE material appears to be sensitive to the variations in ambient temperature and vibration frequency. To minimize these effects, a new VE material has been developed. This new material shows less sensitivity to variations in vibration frequency and temperature. However, it is highly dependent on the shear strain. Experimental studies on the seismic behavior of a 2/5 scale five-story steel frame with these new VE dampers have been carried out. Test results show that the structural response can be effectively reduced due to the added stiffness and damping provided by the new type of VE dampers under both mild and strong earthquake ground motions. In addition, analytical studies have been carried out to describe the strain-dependent behavior of the VE damper. The dynamic properties and hysteresis behavior of the dampers can be simulated by a simple bilinear model based on the equivalent dissipated energy principle proposed in this study.

• 기술사
• /
• 제23권6호
• /
• pp.41-46
• /
• 1990

First of all, Under given condition such as bit gage of 36mm Drill bit with right class of jack-logs experimental test carried out from two face of Bench, firing of each hole brought 90 degree Angle face and them measured length of Burden and charged ammount of powder as following. (equation omitted) A=Activated Area A=ndi=m S=Peripheral length of Charged. room Ca=Rock Coeffiecency d : di=Hole diameter When constructed subway of Seoul in 1980 the blasting works increased complaint of ground vibration. in order to prevent the damage to structures. Some empirical equations were made as follows on condition with Jackleg Drill (Bit Gage ø 36mm) and within 30 meter distance between blasting site and structures. V=K(D / W)$\^$-n/ N=1.60-1.78 K=48-138 Project one of contineous works to above a determination of empirical equation on the cautious blasting vibration with Crawler Drill(ø 70-75mm) in long distance. V=41(equation omitted) V=124(equation omitted).

• 화약ㆍ발파
• /
• 제8권3호
• /
• pp.3-13
• /
• 1990

First ot of all, under given condition such as bit gage of 36mm Drill bit with right class of jack-leg-experimental test carried out from two face of Bench, firing of each hole brought 90 degree Angle face and them measured length of Burden and charged ammount of powder as following. $ca=\frac{A}{SW}$ A=Activated Area A=nd i=m S=Peripheral length of charged, room Ca=Rock Coeffiecency d: di=Hole diameter When constructed subway of Seoul in 1980 the blasting works increased complaint of ground vibration, in order to prevent the damage to structures. Some empirical equations were made as follows on condition with Jackleg Drill (Bit Gage 36mm) and within 30 meter distance between blasting site and structures. $V=K(D/W)^{-n}$ N=1.60 - 1.78 K= 48 - 138 Project is one of contineous works to above a determination of empirical equation on the cautious blasting vibration with Crawler Drill (70-75mm) in long distance. $V=41(D/\sqrt[3]{W})^{-1.41}$ $30m\le{D}\le{100m}$ $V=124(D/\sqrt[3]{W})^{-1.66}$ $100m\le{D}\le{285m}$.