• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.347-354
• /
• 2002

In this paper, when structures are constructed in the soft ground with poor bearing capacity at Incheon International Airport(railroad area), as for the grouting columns built In soft ground by high pressure jet grouting with Triple tube rod(super injection grouting), the effects on reinforcement and bearing capacity of ground are investigated. A unconfined compressive strength tests has been performed on the specimens sampled from the grouting columns and a mass plate bearing test has been performed on a grouting column. The test results show that super injection grouting has a sufficient effect on composite ground improved of foundation ground and reatraint of settlement of structure.

• Geomechanics and Engineering
• /
• 제12권5호
• /
• pp.739-752
• /
• 2017

This study was intended to evaluate the improved strength of the ground by applying the bio grouting method to a loose sandy ground. The injection material was prepared in the form of cement-like powder, with the bio injection material produced by microbial reactions. The grouting test was conducted under the conditions similar to the field where the bio injection material can be applied. In addition, the injection materials (cement and sodium silicate No. 3) used for Labile Waterglass (LW) method and the conventional grouting methodwere prepared through a two-solution one-step process. The injection into the specimens was done at a pressure of 150 kPa and then, with a bender element, their moduliof elasticity were measured on the 7th, 14th, 21st and 28th curingdays to analyze their strengths according to the duration of curing. It was confirmed that in all injection materials the moduli of elasticity increased over time. In particular, when 30% of the bio injection material was added to 100% cement, the modulus of elasticity tended to increase by about 15%. This confirmed that the applicability became higher when the bio injection material was used in place of the conventional sodium silicate.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.619-626
• /
• 2002

In this study, a correlation among pressure, time and quantity of injection was organized from the laboratory tests, which were executed many times representing in-situ soil conditions carefully and then it would be applied to the in-situ soil injection simulator which will be developed for optimal injection into the ground. The sort of sample soils were both sand(A specimen) and silty sand(B specimen). Injection tests were gone into operation by compaction state, injection velocity and the depth individually. In the ground improved with permeation Infection, the relation among injection pressure of the same depth, the injected quantities and time were systematic by the depth. By defining the limit range of injection pressure and quantity about the variety of a linear equation obtained from lining each of their trend, the application of laboratory injection monitoring program and the data to evaluate its realization were produced. In the ground improved with root type injection, the relation between injection pressure and the injected quantities was irregular because fracture state occurred quickly.

• 한국지반공학회논문집
• /
• 제17권6호
• /
• pp.53-67
• /
• 2001

본 연구에서는 침하가 발생한 연약지반에 대하여 저유동성 몰탈에 의한 주입공법인 CGS공법의 적용성과 침하억제 효과를 확인하기 위하여 시험시공을 실시하고 그 결과를 분석하였다. 시험시공 현장은 파일에 의하여 지지된 기 시공 된 아파트의 주변지반으로서 사전에 sand drain공법으로 지반에 대한 처리를 실시하였으나 이후에도 지속적인 침하가 발생하고 있는 연약지반이다. CGS주입 전. 후의 지반개량특성을 파악하기 위하여 현장 및 실내토질시험과, 주입시공 중 거동특성을 파악하기 위하여 계측관리와 FDM해석을 실시하였다. 분석결과 연약지반의 지반침하 방지를 주목적으로 하는 CGS공법은 지반조건에 적합한 설치직경, 간격, 심도, 주입재, 주입압 등 다양한 조건으로부터 시공관리가 가능하며, 따라서 설치된 CGS구체는 파일의 지지효과와 더불어 주변지반을 압축강화시켜 복합적으로 지반을 개량시키므로 N치가 평균 2.1 증가하는 등 지반의 지지력 증대 및 침하억제에 효과가 있었다. 또한 적용성 있는 다양한 현장에 일반적으로 사용하게 될 경우 개량효과와 더불어 경제성이 확보될 수 있을 것으로 기대된다.

• 한국지반공학회논문집
• /
• 제19권2호
• /
• pp.217-225
• /
• 2003

지반보강 그라우팅은 대상지반의 공학적 특성 및 사용 목적에 따라 주입재 종류, 주입압력, 주입량 등을 적절히 선택해야 효율적이고 경제성 있는 시공이 될 수 있다. 특히, 압력 그라우팅 공법을 견고한 암반층이 아닌 일반 토사층에 적용시 압력이 높은 경우 수압파쇄에 의한 주입재 이탈 등의 문제가 발생하기 쉬우므로 현장조건에 알맞는 주입압력을 미리 설정하는 것이 필요하다. 이 연구는 느슨 내지 중밀 정도의 쇄석과 모래를 이용한 실험실 모형시험을 통하여 적정 주입압과 주입방법을 밝히기 위해 수행되었다. 최적 주입압, 주입량 그리고 주입시간을 조사하기 위해 실험과정에서 주입조건을 변화시켰다. 시험결과로부터 쇄석 및 모래지반에서 압력그라우팅의 최적 주입압은3~4kg/$cm^2$ 임을 알 수 있었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.611-618
• /
• 2002

In this study the CGS as an injection method by low slump mortar was performed the pilot test to confirm the applicability of this method and the effectiveness of settlement restraint. From the results, there has been concluded the construction control standard such as an institutional diameter, space, depth, injection materials, Infection pressure etc. Also, there has been estimated the ground improvement effectiveness which has resulted from the field investigation and consolidation test etc. From the results, in the adjacent ground the CGS, generally, has been confirmed to in-crease ground strength to improve the consolidation characteristic obtained from the field investigation and consolidation test. Especially, the CGS which performed the larger stiffness to the ground has been concluded that the settlement restraint to the ground complicates the ground effect which Increases the bearing capacity and stress assignment. So, the CGS can be considered as an effective method to increase the bearing capacity as well as the settlement restraint of soft ground.

• 한국구조물진단유지관리공학회 논문집
• /
• 제6권2호
• /
• pp.175-182
• /
• 2002

The cement injection technology on the purpose of ground reinforcement and cut-off has been used in construction sites until now. However, recently it is applied to prevent leakage of underground structure. In this study, applicability of the back side waterproof grouting method was verified through performing field model tests and reviewing case histories. From the results of this study, injection shape of the back side waterproof grouting method was appeared to be root type, and waterproof effect by injection of cement grout material was excellent because grout material infiltrated into boundary between wall of structure and back side ground to be waterproof layer. Components influencing infiltration of injection material are type of soil and degree of compaction. For effective injection, injection pressure has to vary gradually from high pressure to low pessure and small quantity of injection material has to be injected for long times. Also, spacing of injection hole must be designed considering condition of back side ground, injection area, W/C ratio, the number of injection and injection pattern properly.

• 한국지반환경공학회 논문집
• /
• 제24권1호
• /
• pp.15-23
• /
• 2023

그라우팅 공법은 연약지반의 차수 및 보강을 목적으로 시공되는 공법이다. 그라우트가 지반 내에 주입될 때, 지반을 구성하는 지반의 형태, 토립자의 크기, 공극율 및 지하수의 유무에 따라 그라우트가 침투 및 확산하는 형태가 다양하게 나타나고 있으나, 그라우팅 설계 시에는 이러한 요인을 적용하기 어려운 실정이다. 따라서, 본 연구에서는 전도성 재료를 함유한 그라우트를 지반내로 주입하는데 있어서 전도성 재료 첨가에 따른 그라우트의 침투 성능을 파악하기 위하여 실내시험을 수행하였다. 주입시험에서는 전도성 재료를 혼합수의 0%, 3% 및 5%를 그라우트에 첨가하고, 원지반 조건을 자갈과 규사로 구성된 다양한 지반으로 조성하였다. 전도성 그라우트는 전용주입장치를 사용하여 모형지반 내로 압력에 의해 주입되면서 주입시간(t), 압력(p), 유속(v) 및 주입량(q)를 계측하고, 모형지반 내 주입된 경화체를 채취하여 침투성능을 평가하였다. 그라우트 주입실험 결과에서는 전도성 재료의 사용량과 그라우트 주입율은 역의 관계를 나타내었으며, 모형지반 토립자 크기에 따라 침투형태가 변화되는 것을 확인하였다. 전도성 재료를 함유한 그라우트는 지반 내 침투가 비교적 양호하고 경화체의 강도 및 내구성이 우수하여 그라우트의 침투범위 측정을 위한 첨가제로 사용하는 것이 가능하다고 판단하였다.

• Geomechanics and Engineering
• /
• 제18권1호
• /
• pp.59-69
• /
• 2019

Grout injection is mainly used for permeability reduction and/or improvement of the ground by injecting grout material into pores, cracks, and joints in the ground. The oscillatory grout injection method was developed to enhance the grout penetration. In order to verify the level of enhancement of the grout, field grout injection tests, both static and oscillatory tests, were performed at three job sites. The enhancement in the permeability reduction and ground improvement effect was verified by performing a core boring, borehole image processing analysis, phenolphthalein test, scanning electron microscopy analysis, variable heat test, Lugeon test, standard penetration test, and an elastic wave test. The oscillatory grout injection increased the joint filling rate by 80% more and decreased the permeability coefficient by 33-68%, more compared to the static grout injection method. The constrained modulus of the jointed rock mass was increased by 50% more with oscillatory grout injection compared to the static grout injection, indicating that the oscillatory injection was more effective in enhancing the stiffness of the rock mass.

• Geomechanics and Engineering
• /
• 제25권1호
• /
• pp.31-40
• /
• 2021

Injection grouting is one of the most common ground improvement practice to increase the strength and reduce the hydraulic conductivity of soils. Owing to the environmental concerns of conventional grout materials, such as cement-based or silicate-based materials, bio-inspired biogeotechnical approaches are considered to be new sustainable and environmentally friendly ground improvement methods. Biopolymers, which are excretory products from living organisms, have been shown to significantly reduce the hydraulic conductivity via pore-clogging and increase the strength of soils. To study the practical application of biopolymers for seepage and ground water control, in this study, we explored the injection capabilities of biopolymer-based grout materials in both linear aperture and particulate media (i.e., sand and glassbeads) considering different injection pressures, biopolymer concentrations, and flow channel geometries. The hydraulic conductivity control of a biopolymer-based grout material was evaluated after injection into sandy soil under confined boundary conditions. The results showed that the performance of xanthan gum injection was mainly affected by the injection pressure and pore geometry (e.g., porosity) inside the soil. Additionally, with an increase in the xanthan gum concentration, the injection efficiency diminished while the hydraulic conductivity reduction efficiency enhanced significantly. The results of this study provide the potential capabilities of injection grouting to be performed with biopolymer-based materials for field application.