• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1994년도 연약지반처리위원회 봄 학술발표회 논문집 연약지반처리
• /
• pp.13-46
• /
• 1994

Artificial ground freezing methods have been applied to geotechnical construction projects for stabilizing earth materials and controlling water seepage into the ground. However, this can result in frost heaving and causes the same engineering problems as encountered with the natural freezing of soil. In natural freezing, the ground freezes from the surface downward. When artificial ground freezing is applied at a deep location, however, freezing is limited locally. The soil condition differs between them as follows: Natural freezing - unsaturated and without overburden pressure. Artificial freezing -- saturated and under overburden pressure. The authors investigated the practical application of artificial ground freezing and examined the frost behaviour of a saturated soil under overburden pressure. This paper presents the results obtained from experiments concerning frost heaving and discusses frost heaving at the freezing site.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2005년도 동계학술발표대회 논문집
• /
• pp.155-160
• /
• 2005

To purpose of this research is to develop the numerical model for simulating performance of ground heat exchanger with high prediction accuracy. This paper describes the development of a numerical model that simulates the heat transfer between ground and circulation water in ground heat exchanger. Furthermore, we propose the estimating technique of soil properties, such as thermal conductivity, heat capacity and hydraulic conductivity, based on ground investigation. Comparison between experiment and numerical analysis based on the model developed above was conducted under the condition of the experiment in 2004. The result of analysis agreed well with the experimental result.

• Coupled systems mechanics
• /
• 제1권1호
• /
• pp.59-78
• /
• 2012

The available analytical methods of analysis for laterally loaded piles in level ground cannot be directly applied to such piles in sloping ground. With the commercially available software, the simulation of the appropriate field condition is a challenging task, and the results are subjective. Therefore, it becomes essential to understand the process of development of a user-framed numerical formulation, which may be used easily as per the specific site conditions without depending on other indirect methods of analysis as well as on the software. In the present study, a detailed three-dimensional finite element formulation is presented for the analysis of laterally loaded piles in sloping ground developing the 18 node triangular prism elements. An application of the numerical formulation has been illustrated for the pile located at the crest of the slope and for the pile located at some edge distance from the crest. The specific examples show that at any given depth, the displacement and bending moment increase with an increase in slope of the ground, whereas they decrease with increasing edge distance.

• 한국지반공학회논문집
• /
• 제34권11호
• /
• pp.93-105
• /
• 2018

지반 굴착에 따른 주변 지반의 침하 문제를 예측하고 평가하기 위해서는 지반침하 위험인자의 정확한 조사와 해석이 필요하다. 지반침하 위험인자를 조사하기 위한 비파괴조사방법에는 여러 가지 물리탐사방법이 있다. 하지만 이러한 물리탐사 방법에는 지하매질 특성에 영향을 미치는 요인들이 있으며, 실제 지반의 토질은 물리탐사에 영향을 주는 복잡한 요소들이 내포하고 있다. 따라서 흙의 공학적 성질에 대한 이해를 바탕으로 한 물리탐사 방법에 미치는 영향을 분석하는 접근이 필요하다. 이 연구에서는 실제 복합지반에서 다양하고 복잡한 요소들을 고려할 수 있도록 Test Bed를 구축하고, 수치해석을 통해 지반거동을 분석하였다. 또한, 지표투과레이더(GPR) 탐사를 통해 지반침하 위험인자 조사를 위한 한계성을 분석하였다. 그 결과, 개착식 굴착공사에 있어서 지반침하는 여러 가지 요인에 따라 발생 할 수 있으며, 특히 연약지반 조건일 경우에는 지하수위 흐름 변화에 큰 영향을 받는 것으로 나타났다. 또한 GPR의 중심주파수 250MHz인 경우, 전기전도도가 높은 점토 지반에서는 전자기파의 감쇠가 심하게 일어나서 땅속 깊은 곳(지표아래 4m)까지의 투과를 어렵게 만들며, 지하수위 아래에서는 지하수면을 전자기파가 통과함에 따라, 전자기파의 감쇠가 심하게 일어나는 것으로 나타났다.

• 토지주택연구
• /
• 제8권1호
• /
• pp.13-22
• /
• 2017

In this study, triggering mechanism of ground sinking was analyzed through groundwater flow analysis on the basis of a case of the ground sinking occurred in Yongsan in 2015. The results of geotechnical investigation performed before and after the ground sinking were analyzed for the accurate understanding of geological features in the study area. The numerical groundwater flow analysis was performed to evaluate the influence of the flow behavior from the surrounding area toward the excavated site using software of Visual MODFLOW. As a result, it was found from the geotechnical analysis that the strata of sedimentary layer along the sunken area in the vertical direction was mixed significantly after the ground sinking compared with the status of the soil condition before the ground sinking. Piping was occurred at the toe of cut-off wall in the sandy gravel layer, and this phenomenon was predicted by the numerical flow analysis. Sequential ground displacement scenario of the ground sinking was derived from the geotechnical in situ test and numerical flow analysis performed in this study.

• 한국환경복원기술학회지
• /
• 제4권4호
• /
• pp.12-18
• /
• 2001

This study was carried out to analyze physico-chemical properties of soils at the ground of landscape planting in reclaimed land from the sea on Kwangyang Bay, South Korea. Physico-chemical properties of soils at each planting grounds were tested by ANOVA and were significantly(P<0.01) different. The difference came from the soil properties of the covered soil, the disturbance applied to the soil with land use and the accumulation of organic matter after landscape planting. Soil hardness, pH, ECe, Na and K level were in a stable condition at high then low of ground height for landscape planting. Organic matter accumulation was greater at lower planting grounds then top and slope ground of big mounding. The planting grounds of favorable growth for landscape trees were determined as following order : the slope ground and the top ground of big mounding>the ground of medium mounding>the coved ground of improve soil>the lower ground of big mounding>the filled ground of improve soil.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 가을 학술발표회 논문집
• /
• pp.123-130
• /
• 1999

This paper presents a study of geotechnical treatment for artesian pressure after extensive investigation was performed on the distribution and characteristics of artesian condition which exists at Yangsan/Mulgeurn site. The result of analysis indicates that the artesian pressure seems to be up to 2.9M above the existing ground surface, originating from the higher ground water recharging sources in the surrounding hills and mountains. There is no harmful effect after the site development since the height of embankment is more than 4M above the existing ground surface.

• 충청수학회지
• /
• 제33권3호
• /
• pp.339-349
• /
• 2020

Let P ⋊ ℕ^x be a semidirect product of an additive semigroup P = {0, 2, 3, ⋯ } by a multiplicative positive natural numbers semigroup ℕ^x. We consider a covariant semigroup C^∗-algebra 𝓣(P ⋊ ℕ^x) of the semigroup P ⋊ ℕ^x. We obtain the condition that a state on 𝓣(P ⋊ ℕ^x) can be a ground state of the natural C^∗-dynamical system (𝓣(P ⋊ ℕ^x), ℝ, σ).

• 산업기술연구
• /
• 제22권A호
• /
• pp.229-240
• /
• 2002

This paper is an experimental and numerical work of Investigating the bearing capacity of shallow foundation of rubble mound under eccentric loads. Parametric centrifuge model tests at the 50g level environments with the model footings in the form of strip footing were performed by changing the loading location of model footing, relative density and materials for ground foundation. For the model ground, crushed rock sampled from a rocky mountain was prepared with a grain size distribution of having an identical coefficient of uniformity to the field condition. Model ground was also prepared with relative densities of 50 % and 80 %. For loading condition, model tests with and without eccentric load were carned out to investigate the effect of eccentric loads and a numerical analysis with the commertially available software of FLAC was performed. For numerical estimation with FLAC, the hyperbolic model of a nonlinear elastic constitutive relationship was used to simulate the stress-stram constitutive relationship of model ground and a series of triaxial compression test were carried out to find the parameters for this model Test results were analyzed and compared with Meyerhof method (1963), effective area method based on the limit equilibrium method, and a numerical analysis with FLAC.

• Macromolecular Research
• /
• 제16권5호
• /
• pp.404-410
• /
• 2008

In order to obtain 'value added products' from polypropylene (PP)/waste ground rubber tire powder (WGRT) composites, PP/WGRT microcellular foams were prepared via supercritical carbon dioxide. The effects of blend composition and processing condition on the cell size, cell density and relative density of PP/WGRT micro-cellular composites were studied. The results indicated that the microcellular structure was dependent on blend composition and processing condition. An increased content of waste ground rubber tire powder (WGRT) and maleic anhydride-grafted styrene-ethylene-butylene-styrene (SEBS-g-MA) reduced the cell size, and raised the cell density and relative density, whereas a higher saturation pressure increased the cell size, and reduced the cell density and relative density. With increasing saturation temperature, the cell size increased and the relative density decreased, whereas the cell density initially increased and then decreased.