• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.3
• /
• pp.26-34
• /
• 1999

This paper was intended to find out the relationship between optical and interior properties of coated paper and printability with the variation of particle size of ground calcium carbonate(GCC) by using Mercury Porosimeter, and to find out the pore properties of coated paper as well. The viscosity and water retention of coating color was increased and smothness, sheet gloss and porosity of coated paper were improved as the particle size of GCC was decreased. However, there was no difference in opacity and brightness of coated paper. The pore volume of coated paper was decreased, but the number of pores was drastically increased according to the decrease of the particle size of GCC. The weight of ink transferred into coated paper was increased in proportion to pore volume of coated paper. However, the weight of damping water and ink induced toward coated paper was slightly increased. Ink setting was accelerated printing gloss was not changed. Therefore, optical and interior properties of coated paper seemed to be affected by the pore property of coated paper and printability was also affected by it.

• Journal of the Speleological Society of Korea
• /
• no.66
• /
• pp.45-57
• /
• 2005

This Paper is a study on the duality of speleothem that appeared in 'Hyeob Jae Cave' which is designated as the natural monumen. No.236. It is located at Hyeob Jae Ri, Hanrim Eub, Bug Je-ju Gun, Je-judo. The findings are as follows. 1. The distribution range of the shelly sand which has maximum thickness of $10m{\pm}$ and average of $3m{\pm}$ was $3.2m^2$. 2. The desert hollow acted to promote the speleothem deposits in the lava tunnel with lava mound formed by lavapilz and artificial breaksand wall. 3. The main component of the pseudo limestone cavern was carbonate Calcium from shelly sand. And the deposition of speleothem in the Cave was accelerated after the volcanic erupsion of Biyang island in 1002. A.D. 4. The secondary depositions of Calcite recognized as speleothem up to now it can be used for the pseudo karst in general. 5. It seems that the variety of the cave deposits is decided depending upon the geology, land form, climate, vegetations and the structural environmental factors. 6. It seems that the wondering development of accretionary deposits caused by encrusting has a close relation with intermittent seepage of ground water. 7. Finally, we can acknowledge the coexistent duality of speleothem by shelly sand along with the joint and the lava stalactites formed at the same time with the lava tunnel on the ceiling where there was no seepage.

• Journal of Korean Society on Water Environment
• /
• v.25 no.4
• /
• pp.515-521
• /
• 2009

In this study, the applicability of $CaCO_3$ as a seed material for crystallization reaction was tested. $CaCO_3$ was ground to lesser than 425 mesh and was made to media mixed with binder. Batch experiment was to investigate the ${PO_4}^{3-}-P$ removal efficiency of different parameters such as $CaCO_3$ dosage and binder ratio, size, type and mass of media. In addition, the effect of phosphorus removal from wastewater was tested using a lab-scaled crystallization reactor. At the results of the batch test, phosphorus removals were improved with increasing $CaCO_3$ dosage and media mass but were decreased with increasing media size. Moreover, phosphorus removals were influenced by specific surface area but media type. The average T-P and ${PO_4}^{3-}-P$ removal efficiency in a lab-scaled crystallization reactor with $CaCO_3$ media for wastewater were shown to be 60.2% and 60.3% for 18 days of operation time.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.5
• /
• pp.51-60
• /
• 2014

To find a practical application approach of polyelectrolyte multilayering (PEM) on inorganic filler, we introduced PEM process without washing step and investigated the effect of shear condition on the washless PEM treatment of ground calcium carbonate (GCC). Washless multilayering on GCC was conducted under various shear conditions such as stirring, homogenization, and ultrasonication. Highly charged polyelectrolytes combination of polydiallyldimethylammonium chloride (PDADMAC) and poly sodium 4-styrene sulfonate (PSS) and low charged polyelectrolytes combination with cationic starch and anionic polyacrylamide (PAM) were compared. In the case of highly charged polyelectrolytes combination, shear conditions did not affect the zeta potential and the particle size of treated GCC. However, the modified GCC particles with low charged polyelectrolytes were more dispersed under higher shear condition while maintaining the zeta potential. In addition, GCC was successfully modified through laboratory inline washless polyelectrolyte multilayering system which consists of homogenizers and pumps.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.23 no.3
• /
• pp.640-658
• /
• 1996

The purpose of this study was to examine the mechanism of improving acid resistance of Nd-YAG laser irradiated tooth enamel and determine the most effective energy density for improving acid resistance. The bovine tooth enamel were lased with a pulsed Nd-YAG laser. The energy densities of exposed laser beam were varied from 10 to $70\;J/cm^2$. To investigate the degree of improving acid resistance by irradiation, all the samples were submerged to demineralize in 0.5 N $HClO_4$ solution for 1 minute. After 1 minute, 0.05 % $LaCl_3$ was added to the solution for interrupting the demineralization reaction. The amounts of dissolved calcium and phosphate in the solution were measured by using an atomic absorption spectrophotometer and the UV/VIS spectrophotometer, respectively. To examine the mechanism of improving acid resistance, X-ray diffraction analysis, infrared spectroscopy, and scanning electron microscopy were taken. The X-ray diffraction pattern of the samples were obtained in the $10^{\circ}{\sim}80^{\circ}2{\theta}$ range with $Cu-K{\alpha}$ radiation using M18HF(Mac Science Co.) with X-ray diffractometer operating at 40 KV and 300 mA. The infra-red spectra of the ground samples in 300 mg KBr pellets 10 mm diameter were obtained in the $4000cm^{-1}\;to\;400cm^{-1}$ range using JASCO 300E spectrophotometer. The scanning electron microscopy was carried out using JSM6400(JEOL Co.) with $500{\sim}2000$ times magnification. The results were as follow 1. The concentration of calcium dissolved from laser irradiated enamel with $50J/cm^2$ was significantly lesser than that of unlased control group (p<0.05) 2. From the result of the X-ray diffraction analysis, $\beta$-TCP, which increases acid solubility, was identified in lased enamel but the diffraction peaks of (002) and (004) became sharp with increasing energy density of laser irradiation. This means that the crystals in lased samples were grown through the c-axis and subsequently, the acid solubility of enamel decreased. 3. The a-axis parameter was slightly increased by laser irradiation, whereas the c-axis parameter was almost constant except for a little decrease at $50J/cm^2$. 4. In the infra-red spectra of lased enamels, phosphate bands ($600{\sim}500cm^{-1}$), B-carbonate bands (870, $1415{\sim}1455cm^{-1}$), and A-carbonate band ($1545cm^{-1}$) were observed. The amounts of phosphate bands and the B-carbonate bands were reduced, on the other hand, the amount of the A-carbonate band was increased by increase the energy density. 5. The SEM experiments reveal that the surface melting and recrystallization were appeared at $30J/cm^2$ and the cracks were observed at $70J/cm^2$. From above results, It may be suggested that the most effective energy density for improving acid resistance of tooth enamel with the irradiation of Nd-YAG laser was $50J/cm^2$. The mechanism of improving acid resistance were reduction of permeability due to surface melting and recrystallization of lased enamel and reduction of acid solubility of enamel due to decrease of carbonate content and growth of crystal.

• Applied Chemistry for Engineering
• /
• v.9 no.7
• /
• pp.961-967
• /
• 1998

In order to improve the optical properties and printability of paper, various fillers are used in papermaking. This study was performed to investigate several fillers-precipitated calcium carbonate(PCC), ground calcium carbonate(GCC), and blends(PCC/talc or micro-talc(MVP) and GCC/talc or micro-talc(MVP)-for their effects on various newsprint properties. Results obtained from the study were summarized as follows ; 1) PCC treatment gave about 16.8% higher retention than GCC treatment at the filler level of 5% and the retention of filler in the handsheet increased as average particle size of mixed filler was increasing($PCC{\leq}GCC<MVP<talc$). 2) PCC treatment kept opacity more highly than no filler treatment and opacity decreased as average particle size of mixed filler was increasing. 3) Independent treatment of PCC kept tear strength more effectively than GeC did, and tear strength increased as average particle size of mixed filler was increasing. 4) Independent treatment of pee kept tensile strength more highly than other treatments and Gee treatment kept tensile strength highly than pee treatment under mixed filler treatment. 5) Burst strength under PCC treatments decreased linearly as average particle size of mixed filler was increasing. 6) Compared "With non-filler treatment, filler treatment gave much better printability.

• Journal of Life Science
• /
• v.16 no.6
• /
• pp.1044-1051
• /
• 2006

The barren ground is an abnormal phenomenon of coastal ecosystem in which seaweeds, are destroyed and mostly replaced by the coralline algae containing the calcium carbonate components. To restore the seaweed forest, We have exerted an effort in the local areas, Samchuck, Korea, where barren phenomena are profound. Two methods of seaweed forest construction developed in the present study are underwater longline and seed transplantation for the brown seaweed Costaria costata, a fast growing edible seaweed. The sizes of C. costata attached on the underwater longline were $96.7{\pm}2.2mm$ of blade length and $83.6{\pm}7.7g$ of blade weight in April. Thereafter the sizes declined from May. Similar pattern was obtained from in the transplantation method with maxima of $90.4{\pm}15.8mm$ and $70.1{\pm}31.7g$ for blade length and weight, respectively in April. It appeared totality maturation from two methods in May. This maturation time is the same like that of wild C. costata.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.45 no.3
• /
• pp.262-270
• /
• 2012

Seaweeds provide habitats in which marine animals can spawn and develop, and serve as a food supply for algaegrazing species such as sea urchins and abalone. Recently, seaweed species have disappeared from coastal ecosystems, leaving barren ground, defined as habitats that have lost their algae forests and where coralline algae containing calcium carbonate components have become encrusted on rocks. The biological causes of barren ground include grazing by herbivores and excessive seaweed harvest. The environmental harm caused by the spread of barren ground includes accelerated eutrophication following the reduction in seaweed, which plays an important role in oceanic purification. In the present study, we identified the relationships between various seaweed species and the occurrence of barren ground. Subtidal benthic macroalgal flora and community structure were observed seasonally on barren ground along vertical transects of rocky shores of Bihwa, Samchuck, and the east coast of Korea from February to November 2006. Fifty-eight seaweed species were identified, including 7 green, 15 brown, and 36 red algae species. There were between 6 and 28 species among seasons. Over the whole study period, average seaweed biomass (g wet wt $m^{-2}$) was 241.90 g, with a seasonal range of 25.26 to 760.34 g. Seaweed biomass declined with increasing seawater depth and ranged between 91.26 and 422.08 g. The vertical distribution of algae was characterized by Undaria pinnatifida and Sargassum honeri at 5 m, S. honeri and U. pinnatifida at 10 m, and U. pinnatifida and Agarum clathratum at 15 m depth. Seasonal patterns in community indices were not found. Community indices showed different patterns along vertical shoreline gradients; the dominance index increased but the richness, evenness, and diversity indices decreased with seawater depth. Sea urchin density was 8 to 24 individ. $m^{-2}$ in Bihwa. These urchin populations had significantly aggregated spatial patterns and recurrent destructive grazing appeared to be occurring.

• Journal of the Korean GEO-environmental Society
• /
• v.18 no.10
• /
• pp.15-22
• /
• 2017

The soil improvement method so far has been developed with an emphasis on enhancing the strength of the ground. A soil improvement method using a excellent cementitious stabilizer in economical efficiency and handling property is mainly used. The soil improvement method using cementitious stabilizer is effective but environmental and human harmful substances are detected and environmental problems such as carbon dioxide emission and groundwater pollution are pointed out. Therefore, as part of an alternative method capable of solving such problems, researches on the soil improvement method incorporating biological technology are being actively carried out. This study was conducted to investigate the characteristics of strength change when mixed with environmentally friendly soil binder and microorganism in clay, and it was analyzed by uniaxial compression test, direct shear test, SEM, XRD. As a results of the test, we confirmed the cementation caused by microbially induced calcite precipitation and the strength increase enhancement by it.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.5
• /
• pp.21-31
• /
• 2012

In this study, we modified the surface of ground calcium carbonate (GCC) with polyelectrolytes with different molecular weight using Layer-by-Layer (LbL) multilayering technique and investigated its effect on the paper properties. Polydiallydimethylammonium chloride (poly-DADMAC) and poly sodium 4-styrene sulfonate (PSS) which have different molecular weights were used for LbL multilayering. Zeta potential and particle size of the LbL modified GCC were measured. After preparation of handsheets, their structural and mechanical properties were evaluated. The zeta potential and average particle size of the modified GCC were affected by the molecular weight of anionic polyelectrolyte (PSS). The zeta potential was higher and the particle size was smaller when GCC was treated by PSS with high molecular weight compared to the case with low molecular weight of PSS. The tensile and internal bond strength of the handsheets was increased with an increase in the number of layers on GCC particles, but the molecular weight of polyelectrolyte did not significantly affect the paper strength.