• EDISON SW 활용 경진대회 논문집
• /
• 제5회(2016년)
• /
• pp.513-515
• /
• 2016

There are various walking devices based on Theo Jansen mechanism. And these systems controlled by complicate equations. So we decided to optimize the design of walking device with two points of view. The device is required to ensure stability while maintaining the high speed. To simplify the control system, we applied trigonometric ratio with ideal Jansen trajectory. As a result, we were able to draw the connection between height of barrier and Ground Length (GL). Also we could change traveling distance and Ground Angle Coefficient (GAC) by shifting the position of the joints. Through controlling these parameter, we can analyze stability and speed of the device. Ultimately, we develop the device that can walk more efficiently by the optimization process.

• EDISON SW 활용 경진대회 논문집
• /
• 제5회(2016년)
• /
• pp.443-454
• /
• 2016

This study focus to make 8 legs robot based on Jansen's mechanism. In the process of making, we found GL(Ground length),GAC(Ground Angle Coefficient) and the height difference of tract and compare Several models with M.Sketch to find link's Length ratio Optimised simple walking and crossing of obstacles. In the process, our team Analyzed the difference ideal tract (Jansen holy number model's track) contrived by Jansen and our final model tract. As a result, we found optimal link's length ratio to over the obstacles and some features that our model differ from Jansen holy number model. It means that optimal link's length ratio depends on certain circumstances, perfect length ratio is nonexistent.

• 한국유체기계학회 논문집
• /
• 제4권2호
• /
• pp.29-34
• /
• 2001

Experimental and numerical studies are conducted to investigate the flow field over a NACA0012 airfoil with ground effects. In experiment, the ground is simulated by a moving belt system. From the comparison between the experimental and numerical results, it is concluded that the velocity gradient over the ground plane causes the increments in pressure coefficient on lower surface of the airfoil and reduces the suction peak at the leading edge.

• EDISON SW 활용 경진대회 논문집
• /
• 제5회(2016년)
• /
• pp.384-388
• /
• 2016

This paper proposed a m.Sketch to search the optimal link lengths for a legged walking robot. In order to apply the m.Sketch for the proposed, set the design parameters of the constraints and use the m.Skecth to get optimal GL(Groud Length) and GAC(Ground Angle Coefficient). The legged robot designed based on four-bar linkage theory and Theo Jansen mechanism. The stride length of the legged walking robot was defined based on the proposed kinematic analysis. Use the Edison Design m.Sketch simulate and find the optimal link length having the best of the Ground Length (GL) and Ground Angle Coefficient(GAC). And use these length implemented the Theo Jansen mechanism both in Science box parts and acrylic. In addition to the further expansion of the legs to reach the goaltranslating heavy objects or person.

• EDISON SW 활용 경진대회 논문집
• /
• 제6회(2017년)
• /
• pp.608-614
• /
• 2017

얀센메커니즘을 활용한 보행로봇의 단점인 저속을 개선 하기위한 연구이다. 그 예시로 라인트레이싱 속도를 높이기 위한 다리의 최적설계를 수행하였다. 이를 위해 EDISON에서 제공하는 프로그램을 사용하여 Ground angle coefficient와 Ground length를 더한 목적함수를 최대값으로 설계하였고 보행능력이 증가하였다.

• 한국항공우주학회지
• /
• 제42권12호
• /
• pp.997-1003
• /
• 2014

무인항공기의 자동이착륙을 성공적으로 수행하기 위해서는 자동 지상활주 제어는 반드시 설계되어야 하는 중요한 부분이다. 이러한 지상활주 제어기를 설계하기 위해서는 정확하고 신뢰도 높은 착륙장치 모델은 반드시 필요하다. 본 연구에서는 착륙장치 모델링을 완성하기 위해서 특별히 착륙장치 측력 모델링을 수행하였다. 조향각 명령을 포함한 Cornering Angle을 계산하여 측력을 모델링하였다. 그리고 모델링된 착륙장치 모델을 포함한 비선형 6자유도 시뮬레이션 환경을 이용하여, 항공기의 바람벡터 방향인 Course Angle 오차를 해소하기 위한 전륜 조향(Nose Wheel Steering)과 러더 조향(Rudder Steering)을 동시에 이용하는 자동 지상활주 제어기를 설계하였다. 설계된 지상활주 제어기를 동일하게 적용하여, 착륙장치 모델을 포함한 시뮬레이션 결과와 실제 무인기를 이용한 자동 지상활주 시험 결과를 비교하였고, 이로써 착륙장치 측력 모델링과 지상활주 제어기의 정확성을 입증하였다.

• EDISON SW 활용 경진대회 논문집
• /
• 제6회(2017년)
• /
• pp.516-526
• /
• 2017

본 논문은 테오얀센 메커니즘을 적용한 보행 로봇 형상 및 라인 트레이싱을 위한 센서의 최적 설계를 수행한다. 소프트웨어를 활용하여 보행 로봇의 운동학적 해석(보행 곡선 추적, Ground Length, Ground Angle Coefficient), 최적화 및 상세 설계, 센서 추적 관련 시뮬레이션을 수행하고 분석하여 속도가 빠르며 안정적으로 주행하는 테오얀센 메커니즘 모델을 제안한다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.419-433
• /
• 2009

Pressure grouting is a common technique in geotechnical engineering to increase the stiffness and strength of the ground mass and to fill boreholes or void space in a tunnel lining and so on. Recently, the pressure grouting has been applied to a soil-nailing system which is widely used to improve slope stability. The soil-nailing design has been empirically performed in most geotechnical applications because the interaction between pressurized grouting paste and the adjacent ground mass is complicated and difficult to analyze. The purpose of this study is to analyze the increase of pullout resistance induced by pressurized grouting with the aid of performing laboratory model tests and field tests. In this paper, two main causes of pullout resistance increases induced by pressurized grouting were verified: the increase of residual stress; and the increase of coefficient of pullout friction. From the laboratory tests, it was found that residual stress in borehole increases by pressurized grouting and dilatancy angle could be estimated by cavity expansion theory using the measured wall displacements. From the field test results, the pullout resistance of soil-nailing with pressurized grouting was found to be 10% larger than that of soil-nailing with gravitational grouting, mainly caused by mean normal stress increase and dilatancy effect. So, the pullout resistance could be estimated by considering these two effects. The radial displacement increases with dilatancy angle increase and the dilatancy angle decreases with injection pressure increase. The measured pullout resistance obtained from field tests is in good agreement with the estimated one from the cavity expansion theory.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1999년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.468-473
• /
• 1999

This study was carried out to assess the use of RADARSAT data which is C-band with HH polarization for the rice growth monitoring in Korea. Nine time-series data were taken by shallow incidence angle (standard beam mode 5 or 6) during rice growing season. And then, backscatter coefficient ($\sigma$$^{\circ}$) were extracted by calibration process for comparing with rice growth parameters such as plant height leaf area index(LAI), and fresh and dry biomass. Field experimental data concerned with rice growth were collected 8 times for the ground truth at the study area, Tangjin, Chungnam, Korea. At the maximum vegetative stage of rice, backscatter coefficients were the highest at the flooded rice field ranging from -4.4dB~-3.1dB. The temporal variation of backscatter coefficient($\sigma$$^{\circ}$) in rice field was significant in this study Backscatter coefficient ($\sigma$$^{\circ}$) of rice field was a little bit lower again after heading stage. This results show RADARSTA data is promising for rice monitoring.

• 한국소음진동공학회논문집
• /
• 제19권4호
• /
• pp.425-432
• /
• 2009

Recently, reduction of road traffic noise in residential buildings has become one of the most important subjects. To reduce the road traffic noise, noise impact assessment by the road traffic prediction model is required before building construction. For reasonable road traffic noise prediction, it is required to analysis of various factors in road traffic prediction models. This paper was studied the road traffic noise propagation factors such as distance from road to building, receiver height, alignment angle of building and reflection coefficient of the building facade by two calculation models, RLS-90 and CRTN. The result showed that noise reduction was generally higher at bottom stories by ground absorption effect. The reflection coefficient of the building facade was affect of additional sound pressure level by facade reflecting. And alignment angle of building at $90^{\circ}$ was performed effective noise reduction better than $0^{\circ}$.