• 한국정밀공학회지
• /
• 제24권1호
• /
• pp.79-84
• /
• 2007

Some surface pattern of tribological application is an attractive technology of engineered surface. Therefore, friction reduction is considered to be necessary for improved efficiency of machine. This study investigated the effect of friction property for angles of micro-crosshatch groove surface pattern on bearing steel using pin-on-disk test. We obtain sample which can be fabricated by photolithography process. We discuss the friction property depend on an angle of crosshatch groove surface pattern. We can verify the lubrication mechanism as Stribeck curve, which has a relationship between the friction coefficient and a dimensionless parameter under the lubrication condition. It was found that the friction coefficient was related to angle of crosshatch groove pattern on contact surface.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.2101-2104
• /
• 2003

Experimental investigations are performed for the rarefied gas flows in a disk-type drag pump (DTDP). The pump considered in this paper consists of grooved spiral channel on rotors and planar stators. The flow-metre method is adopted to calculate the pumping speed. Compression ratio and pumping speeds for the nitrogen gas are measured under the inlet pressure range of $0.001{\sim}4$ Torr. The maximum of compression ratio was about 3300 for three-stage DTDP, 1000 for two-stage and 100 for single-stage DTDP at zero throughput. The number of stage influences the pumping speed of DPDT

• 한국진공학회지
• /
• 제12권2호
• /
• pp.79-85
• /
• 2003

다단 원판형 드래그펌프의 배기특성을 출구측 압력변화에 따른 입구측의 압력을 측정함으로써 파악하였다. 압력측정범위는 유량이 없을 때 출구측에서 0.13∼533 Pa로 하였다. 펌프 로터의 회전 속도는 24,000rpm이며, 질소가스를 사용하여 유량에 대한 성능실험을 수행하였다. 본 연구에서는 원판의 단의 수에 따른 원판형 드래그 펌프의 성능을 측정하였다. 3단, 2단, 단단형으로 원판형 드래그펌프를 구성하여 성능 실험하였으며, 최대도달진공도, 최대압축비, 배기속도등을 각각 측정하여 상호 성능을 비교·고찰하였다.

• 한국산학기술학회논문지
• /
• 제13권11호
• /
• pp.4937-4943
• /
• 2012

버터플라이 밸브는 다른 밸브에 비해 작동의 용이성으로 각종 산업에서 유량 조절을 목적으로 많이 활용되고 있다. 버터플라이 밸브를 통과하는 유량을 제어하기 위해서는 디스크 각에 따른 용량계수에 따라 유량을 제어하게 된다. 본 논문에서는 고품질 밸브 제작을 위해 성능 지표 중에 하나인 용량계수를 기존의 제품의 3D 모델을 이용하여 유동 해석 및 분석을 수행하였고 이를 검증하기 위해 용량계수 측정 장비 측정을 통해 해석의 신뢰성을 확인하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.748-752
• /
• 2004

Fluid dynamic bearings (FDBs) have been replacing ball bearings of the HDD spindle motor very rapidly. But there are several demerits of HDB, such as high friction torque, variable viscosity of the fluid lubricant depending on operating temperature, low stiffness, and etc. Eccentricity is one of the major parameters which affects the static and dynamic characteristics. As the static eccentricity is larger, the stiffness and the damping coefficients become bigger. But friction torque is relatively unaffected by the static eccentricity. This research proposes a new type of journal bearing with asymmetric journal grooves which results in better dynamic characteristics. The static and dynamic characteristics of the new journal bearing are investigated by solving the Reynolds' equation with FEM, and the transient analysis is performed to predict the dynamic behavior of rotor by solving the equations of motion of a HDD spindle system with Runge-Kutta method. The result shows that the proposed Journal bearings have much bigger stiffness and damping coefficients compared with the conventional symmetric ones. And consequently, it has smaller whirl radius and tilting angle.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.760-767
• /
• 2014

This paper proposes a method to calculate pressure and flow of the fluid dynamic bearings (FDBs) with a recirculation channel (RC) by solving the Reynolds and the Hagen-Poiseuille equations at the same time. The Hagen-Poiseuille equation is one-dimensional equation which describes the flow in a circular pipe such as the RC. This research developed a finite element program to solve the Reynolds and the Hagen-Poiseuille equation together. The proposed method was applied to calculate the pressure and flow of the FDBs which are composed of grooved or plain journal and thrust bearings, and RC. To verify the proposed method, it also developed a finite volume model of the FDBs, and pressure and flow were calculated by the commercial CFD solver. They agree well with the pressure and flow calculated by the proposed method. Finally, this research investigated the characteristics of the FDBs due to the radius change of the RC.