• 음성과학
• /
• 제4권1호
• /
• pp.135-145
• /
• 1998

An Electropalatographic (EPG) study was conducted to investigate the articulatory characteristics which determine the, distinction between the Korean lax fricative [s] and tense fricative [s']. This study also intended to test if an increase in the degree of tensity (lax fricative [s] < tense fricative [s']) induces a decrease in coarticulatory vocalic effects. The results indicated that the increase in the tensity of Korean fricatives is closely related to the increase in the narrowness of the groove width (wider contact at the place of articulation), the forward shifting in the place of articulation, and the longer duration of the constriction (longer maintenance in the manner of articulation). It was also found that coarticulatory vocalic effects on Korean fricatives are affected by Recasens' two rules of constraint (1983) : spatial and temporal constraints.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.670-677
• /
• 2003

Although Gas Tungsten Arc Welding (GTAW or TIG welding) is considered as high quality and precision welding process, it also has demerit of low melting rate. Narrow-gap TIG welding which has narrow joint width reduces the groove volume remarkably, so it could be shorten the welding time and decrease the overall shrinkage in heavy wall pipe welding. Generally Narrow-gap TIG welding is used as orbital welding process, it is important to select the optimum conditions for the automatic control welding This paper looks at the application and metallurgical properties on Narrow-gap TIG welding joint of heavy wall large austenitic stainless steel pipe to determine the deposition efficiency, the resultant shrinkage and fracture toughness. The fracture toughness depends slightly on the welding heat input.

• 한국정밀공학회지
• /
• 제29권3호
• /
• pp.339-345
• /
• 2012

Electrospun meshed poly-caprolactone PCL was patterned by femtosecond laser with linear grooves. As parametric variables, focus spot size, pulse energy, and scanning speed were varied to determine the affects on groove size and the characteristics of the electrospun fiber at the edges of these grooves. The femtosecond laser was seen to be an effective means for flexibly structuring the surface of ES PCL scaffolds and the width of the ablated grooves was well controlled by laser energy and focus spot size. The ablation threshold was measured to be $14.9J/cm^2$ which is a little higher than other polymers. These affects were attributed to optical multiple reflections inside nano-fibers. By the laser-induced plasma at higher pulse energies, some melting of fibers was observed.

• 한국기계가공학회지
• /
• 제4권3호
• /
• pp.5-12
• /
• 2005

In wire discharge machining which is using STD 11 as die materials, the major factors of machining speed are discharge voltage, discharge current, and discharge time. All of the three factors give the effect. Increasing of the discharge pulse time gets groove width wider and it relatively increases surface roughness and clearance. If no load voltage is decreased, surface roughness is good but it decreases machining speed. If on time is increased, machining speed will get faster and clearance and offset value also get bigger.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제30회 추계학술대회
• /
• pp.160-166
• /
• 1999

Nonlinear characteristics of the hydrodynamic journal bearing with circumferentially groove are analyzed numerically considering cavitation region, when an external sinusoidal shock is given to the system. The oil film force is obtained by solving the finite width universal Reynolds equation at each time step. Frequency response function and journal orbit obtained from both linear and nonlinear bearing simulations are compared with each other. The vibration response of the journal is different from the expectation obtained from the linear analysis as increase the vibration amplitude of external disturbance. Therefore, the linear theory is not adequate, and the nonlinear calculation such as used in this research is needed to design safety rotor systems.

• 한국정밀공학회지
• /
• 제18권10호
• /
• pp.178-183
• /
• 2001

Abrasive jet machining(AJM) process is similar to the sand blasting and effectively removes hard and brittle materials. AJM has applied to rough working such as debarring and rough finishing. As the need for machining of ceramics, semiconductor, electronic devices and LCD are increasing, micro AJM is developed, and has become the inevitable technique to micromachining. This paper describes the performance of the micro AJM in micro grooving of glass. Diameter of hole and width of line in grooving is 80${\mu}{\textrm}{m}$. Experimental results showed good performance in micro grooving of glass, but the size of machined groove increased about 2~4${\mu}{\textrm}{m}$. With the fine tuning of masking process and compensation of film wear. this micro AJM could be effectively applied to the micro machining of semiconductor, electronic devices and LCD.

• Fibers and Polymers
• /
• 제3권3호
• /
• pp.113-119
• /
• 2002

Nanoimprint lithography (NIL) is a nanofabrication method known to be a low cost method of fabricating nanoscale patterns as small as 6 m. This study is focused on understanding physical phenomena in the embossing of nano/micro scale structures with 100 nm minimum feature size. We present the effects of capillary force and width of stamp groove on flow behavior at the embossing stage through numerical experimentation. We also compare our numerical results with previous experimental results and discuss our results.

• Journal of Welding and Joining
• /
• 제9권4호
• /
• pp.69-74
• /
• 1991

The Plasma Arc Cutting Method using high density and hight temperature beam is well applicable to the cutting of the nonferrous metal (Al alloy ) and stainless steel which are unable to be cut by the use of the oxy-fuel gas. This study focalizes on the cutting phenomena of the plate of (mm) thickness, since the cutting phenomena of thick plates have been rather thoroughly studied. In this study the cutting groove, adhesive phenomena of dross, surface roughness were measured according to the variation of cutting speed and compared with the case of mild steel plates. The result showed that the kerf width variation of Al alloy was similar to the case of mild steel, while that of the stainless steel differed from the mild steel. In the adhesive phenomena of dross, 6(mm) thick plates of Al alloy showed a difference from those of thick plates, but the stainless steel was similar to thick plates. The surface roughness variation of Al alloy wias minimum at 67 cm/min, while that of stainless steel was at 30cm/min.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 G
• /
• pp.2556-2558
• /
• 1998

2-D microwell arrays for micro ELISA (Enzyme-Linked Immuno Solvent Assay) system were fabricated using micromachining technology. The materials for the bottom plate, top plate and sidewall of the microwell were used a #7740 glass, gold and silicon respectively considering bio-compatibility and easy fabrication. Cylindrical or groove shape microwells, which have about $100{\mu}m$ depth and $50{\sim}500{\mu}m$ diameter or width, were arrayed. The fabricated microwell array can be applied to the essential part of a biochip when surface modification is made to immobilize cells or biomolecules on the microwell bottom.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 추계학술대회 논문집 학회본부
• /
• pp.248-250
• /
• 1996

VTR 자기헤드의 핵심소재로 사용되는 ferrite는 VTR 의 주기능인 영상의 기록 및 재생역할에 가장 중요한 소재이다. 이러한 종류의 head는 지금까지 mask wet chemical etching과 mechanical Process 에 의해 제작 되어왔다. 그러나 기록용량의 중가로 자기장치의 recording density를 높일것이 요구됨에 따라 자기헤드의 gap width를 줄일 필요가 있게 되었다. 본 연구는 mask와 photoresist를 사용하지 않고 ferrite를 직접 미세가공 하는 laser-induced wet etching을 이용하여 자기헤드의 기록용량을 높이고자 하였다. $Ar^+$ laser ( 파장 514 nm )를 빔 확장기와 렌즈를 사용 하여 직경 $1.8{\mu}m$ 로 집속하고, $100{\sim}500\;mW$의 출력 변화를 주어 실험을 하였다. 인산 수용액 (45, 65, 85 %)을 etchant로 사용하여 $5{\sim}30{\mu}m/sec$의 주사속도로 etching 하여, 미세선폭과 high aspect ratio를 갖는 groove를 얻을 수 있었다.