• Journal of the Semiconductor & Display Technology
• /
• v.3 no.1
• /
• pp.9-13
• /
• 2004

Carbon nanofibers (CNFs) with uniform diameter and controlled size were prepared from catalytic decomposition of $\textrm{C}_{2}\textrm{H}_{2}$ with Ni-MgO catalyst treated by mechanochemical (MC) process. The properties of Ni catalyst, such as size, distribution and morphology, can be governed by tuning grinding time in MC process. As a result, size and structure of CNFs can be tailored. The effect of grinding time to the as-grown CNFs was studied. CNFs with diameter from 10-70 nm were synthesized. CNFs with bundle formation sharing one tip and twisted CNFs were also synthesized with catalyst treated by MC process.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2003.12a
• /
• pp.94-98
• /
• 2003

Carbon nanofibers (CNF) with uniform diameter and controlled size could be prepared from catalytic decomposition of $C_2H_2$ with the catalyst treated by mechnochemical(MC) process. The distribution and size of Ni catalyst can be governed by tuning grinding time using MC process. As a result, size and structure of CNF can be controlled. The effect of grinding time to the as-grown CNF was checked. CNFs with diameter from 10-70nm can be synthesized. CNFs with bundle formation sharing one tip were found for MC treated catalyst.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.40 no.2
• /
• pp.207-216
• /
• 1991

In the case that the robot manipulator should respond to the variance and uncertainty of the environment in performing preforming precision tasks, it is indispensable that the robot utilizes the various sensors for intrlligence. In this paper, the robot force control method is implemented with a force/torque sensor, two personal computers, and a PUMA 560 manipulator for performing the various application tadks. The hybrid position/force control method is used to control the force and position axis separately. An interface board is designed to read the force/torque sensor output into the computer. Since the two computers should exchange the information quickly, a common memory board is designed. Before the algorithms of application tasks are developed, the basic force commands must be supplied. Thus, the MOVE-UNTIL command is used at the discrete time instant and, the MOVE-COMPLY is used at the continuous time instant for receiving the force feedback information. Using the two basic force commands, three application algorithms are developed and implemented for edge-following, insertion, and grinding tasks.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.4 s.48
• /
• pp.543-548
• /
• 2004

For pearl pigments used for splendor or gloss effect of make-up products, especiallv point make-up products like eye-shadow and blusher, we studied the variation of particle size distribution by the grinding time and by the binder used as a binding agent. In this study. high speed mixer was used and the particle sire distribution was measured by using the light scattering method. In case of pearl pigments, its median diameter of $5{\;}{\mu}m$, the particle size was reduced to 4.6 um when it was ground for 120 s. When it was applied for the pearl pigment of $45{\;}{\mu}m$, the particle size was reduced to $27{\;}{\mu}m$. We confirmed that the latter was reduced more largely and the original gloss was reduced too. For the binder, we studied the correlation between particle size of raw material and grinding time. We also investigated the effects of the binder contents on the variation of particle size distribution of products by aggregation of particles.

• Annals of Occupational and Environmental Medicine
• /
• v.34
• /
• pp.7.1-7.10
• /
• 2022

Background: Occupational skin diseases are skin conditions that occur or worsen in relation to work and known to be the second most common type of occupational disease affecting individuals in the United States. In Korea, epidemiological reports related to occupational skin diseases are rare. But, no cases of occupational contact dermatitis caused by welding and grinding work have been reported previously. Case presentation: Nine male workers working in the production department for liquefied natural gas (LNG) ships in Ulsan complained of erythematous papules/patches and itching in various areas of the body after welding and grinding work. The work environment monitoring report revealed that the amount of nickel dust exceeded the time weighted average (TWA) and poor local ventilation status. Based on the symptoms and the overall results of surveys, several tests, and work environment monitoring report, the 2 workers who had positive patch-test reactions to nickel were diagnosed with nickel dust-induced allergic contact dermatitis. The other 7 workers were diagnosed that there was a high probability that they had nickel dust-induced irritant contact dermatitis. The 2 workers who had nickel dust-induced allergic contact dermatitis were recommended to switch their jobs. Conclusions: Nickel is one of the most common cause of allergic contact dermatitis. In this case, the dust was assumed to be created by welding work with a high nickel content new welding rod and subsequent grinding work, and the concentration of this dust exceeded the time weighted average. Thus, it is thought that the nickel dust may have caused contact dermatitis through continuous contact with the workers' exposed skin in a poorly ventilated space. Currently, several domestic shipbuilding companies are manufacturing LNG tankers using a new construction method. Consequently, it is highly likely that similar cases will occur in the future, which makes this case report meaningful.

• Journal of the East Asian Society of Dietary Life
• /
• v.23 no.3
• /
• pp.382-390
• /
• 2013

The purpose of this study is to provide the basic findings concerning a quality evaluation. The first conclusion is the coffee's $CO_2$ gas production between a roast brewed at 0 hour and 72 hours after grinding. The espresso, 48 hours after its grind, emits a small amount of $CO_2$ gas, whereas 72 hours after being grinded there is no discharge. In the sensory evaluation, the overall preference is the 72 hours later grind, in accordance to the decrease of the bitter, acid, and sour taste with the increase of the sweet, nutty, and chocolaty flavors. The foam index indicates a significant reduction between the roasts brewed at 0 hour and 72 hours after grinding. A persistence of crema in the Colombian Colombia and Ethiopian Yirgacheffe decline for the 72 hours after its grind coffee. The Tanzanian Kilimanjaro and Brazilian Cerrado roasts show no difference. The pH is decreased in the 72 hours after its grind roast. Moreover, sugar contents in the Colombian Excelso and Brazilian Cerrado are increased, whereas the Tanzanian Kilimanjaro sugar contents are decreased, along with its density.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.3
• /
• pp.235-242
• /
• 2016

The purpose of this study is an attempt to improve the functionality of a conventional Fused Deposition Modeling (FDM) process using the Automatic Tool Changer (ATC) to perform multimaterial production and post-processing. Hybrid-FDM means a fusion of an Additive Manufacturing process and grinding process using the ATC system. In order to enhance the potentiality of production capacity for multi-material fabrication and surface roughness improvement, two extrusion tools and one grinding tool system are suggested. A pneumatic chuck is attached on a moving platform in the XY axes plane and an extrusion head and grinding head are placed in a docking station, allowing for a quick changeover with each other. Therefore, the manufacturing lead time can be reduced efficiently for the fabrication of a product.

• Journal of Powder Materials
• /
• v.13 no.4 s.57
• /
• pp.243-249
• /
• 2006

Yttrium aluminum garnet (YAG) powders were synthesized via mechanochemical solid reaction using $Y_2O_3$ with three types of aluminum compounds. $Y_2O_3$ reacted mechanochemically with all A1 compounds and formed YAM (yttrium aluminum monoclinic), YAG and YAP (yttrium aluminum perovskite) phases depending on the starting materials. The ground samples containing ${\gamma}-A1_2O_3$ showed the best reactivity, whereas the ground sample containing A100H, which had the largest surface area, exhibited pure YAG after calcination at $1200^{\circ}C$. The sample containing Al had the least reactivity, producing YAP along with YAG at $1200^{\circ}C$. The types and grinding characteristics of the starting materials and grinding time are believed to be important factors in the mechanochemical synthesis of YAG.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.11
• /
• pp.893-898
• /
• 2016

Plastic array lens are cheap to manufacture; however, plastic is not resistant to high temperatures and moisture. Optical glass represents a better solution but is a more-expensive alternative. Glass array lens can be produced using lithography or precision-molding techniques. The lithography process is commonly used, for instance, in the semiconductor industry; however, the manufacturing costs are high, the processing time is quite long, and spherical aberration is a problem. To obtain high-order aspherical shapes, mold-core manufacturing is conducted through ultra-precision grinding machining. In this paper, a $4{\times}1$ mold core was manufactured using an ultra-precision machine with a jig for the injection molding of an aspherical array lens. The machined mold core was measured using the Form TalySurf PGI 2+ contact-stylus profilometer. The measurement data of the mold core are suitable for the design criterion of below 0.5 um.

• Journal of the korean Society of Automotive Engineers
• /
• v.15 no.2
• /
• pp.130-143
• /
• 1993

Engineering ceramics have some excellent properties as the material for the mechanical components. It is, however, very difficult to grind ceramics with high efficiency because of their high strength, hardness and brittleness. In this paper, experiments are carried out to obtain the effect of "In-process dressing" to grind the Engineering ceramics with high efficiency. To save running time for dressing process and obtain restraint effect of diamond grain wear, "In-process dressing" system using WA stick type honing stone is proposed. Representative Engineering ceramics, such as AI$_{2}$O$_{3}$, Si$_{3}$N$_{4}$, are ground with diamond wheel. Also bending strength test is carried out to check upward tendancy of mecahnical properties as the result of machining defact restraint through the grinding machining method using "In-process dressing" process. Some results obtained in this study provide useful information to attain the high efficiency grinding and the high mechanical properties of Engineering ceramics.rties of Engineering ceramics.