• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.188-192
• /
• 2001

Magnetic separation and sulphidization-flotation for recovery of nickel and copper from two types of scraped condenser wastes, containing 8- l4% nickel and 2-4% copper, were studied. The effects of magnetic field intensities, classification, and grinding on the recovery of nickel and copper were investigated. According to the characteristics of nickel and copper in the scraps, classification-magnetic separation, different magnetic field intensities, and stages-grinding-cleaning of rough concentrate were investigated. The nickel concentrates containing 38-65% nickel with 84-97% recoveries and the copper concentrates containing 25-43% nickel with 35-60% recoveries were obtained by classification-magnetic separation. In addition, copper concentrates containing 26-45% copper with 76-88% recoveries were obtained by sulphidization-flotation from magnetic tailings and middling products.

• 한국공작기계학회논문집
• /
• 제16권6호
• /
• pp.125-132
• /
• 2007

Inherent dynamic interaction between flexible disk and workpiece creates partially non-flat surface profile. A flat zone was defined using minimum depth of engagement. Several key parameters were defined to explain the characteristics of the zone. Process conditions including disk rotation speed, initial depth of cut and feed speed were varied to produce product profile database. Correlation between key factors was examined to find the characteristic dependencies. Trends of key parameters were displayed and explained. Higher flat zone ratio was observed for lower depth of cut and higher disk rotation speed. Ratio of minimum depth of cut against target depth of cut increased for higher feed speed and disk rotation speed but was insensitive to the depth of cut variation. The process transition was visualized by continuously displaying instantaneous orientation of the deflected disk and the location of key parameters were clearly marked for comparison.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1737-1740
• /
• 2005

As the various manufacturing technology of optical glass is developed, the aspherical lenses are applied to many fields. However, It is still very difficult to manufacture glass lens because of the high cost and the short life of core. In recent years, the demands of the aspherical glass lenses increase since it is difficult to obtain the desirable performance in the plastic lens. In the glass mold lens, it has merits of high productivity and reproductivity since lens is manufactured by the only forming with high precision mold. The fabricating conditions for glass mold lens are glass surface that does not cause fusion, viscosity of 108-1013 poise for the $0.2{\mu}m$ accuracy, and viscoelasticity for the roughness less than 100 angstrom. In this thesis, ultra-precision grinding characteristics of tungsten carbide for forming the aspherical glass lens core were studied and the result of it is applied to manufacture the tungsten carbide-base core of the glass lens used to the laser scanning unit and the camera phone.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1910-1913
• /
• 2005

As the various manufacturing technology of optical glass is developed, the aspherical lenses are applied to many fields. However, It is still very difficult to manufacture glass lens because of the high cost and the short life of core. In recent years, the demands of the aspherical glass lenses increase since it is difficult to obtain the desirable performance in the plastic lens. In the glass mold lens, it has merits of high productivity and reproductivity since lens is manufactured by the only forming with high precision mold. The fabricating conditions for glass mold lens are glass surface that does not cause fusion, viscosity of 108-1013 poise for the $0.2{\mu}m$ accuracy, and viscoelasticity for the roughness less than 100 angstrom. In this paper, ultra-precision grinding characteristics of tungsten carbide for forming the aspherical glass lens core were studied and the result of it is applied to manufacture the tungsten carbide-base cores of the glass lens used to the laser scanning unit and the camera phone.

• 한국방사선학회논문지
• /
• 제14권4호
• /
• pp.433-437
• /
• 2020

방사선 검출 원리에는 형광, 전리, 화학작용 등이 있다. 본 연구에서는 스마트폰 액정 보호용 강화 유리에 방사선을 조사하여 열형광특성을 분석하였다. 방사선에 의한 열형광특성을 분석하기 위하여 6 MV X-선 100 cGy를 강화유리와 강화유리를 분쇄하여 300 ℃ 열처리한 파우더에 조사하였다. 방사선이 조사된 각각의 재료에 대한 열형광량을 측정한 결과 강화유리에서 방사선 노출에 따른 열형광은 약 3배 정도 증가하였고, 강화유리를 분말로 만들어 방사선 노출에 따른 열형광은 약 2.4배 증가하는 것으로 나타났다. 이러한 결과를 바탕으로 스마트폰의 액정 보호 유리는 개인과 집단의 방사선 피폭과 선량을 평가하는 추적물질로 평가되어진다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.307-312
• /
• 2005

As the various manufacturing technology of optical glass is developed, the aspherical lenses are applied to many fields. However, It is still very difficult to manufacture glass lens because of the high cost and the short life of core. In recent years, the demands of the aspherical glass lenses increase since it is difficult to obtain the desirable performance in the plastic lens. In the glass mold lens, it has merits of high productivity and reproductivity since lens is manufactured by the only forming with high precision mold. The fabricating conditions for glass mold lens are glass surface that does not cause fusion, viscosity of 108-1013 poise for the $0.2{\mu}m$ accuracy, and viscoelasticity for the roughness less than 100 angstrom. In this thesis, ultra-precision grinding characteristics of tungsten carbide for forming the aspherical glass lens core were studied and the result of it is applied to manufacture the tungsten carbide-base core of the glass lens used to the laser scanning unit and the camera phone.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.831-836
• /
• 2000

During machining, since more than 50% compliance of the cutting point in machine tool structures comes from headstocks, with the remainder coming from beds, slides and structural joints, the structural analysis of the headstock is very important to improve the static and dynamic performances. Especially, in case of machining hard and brittle materials such as glasses and ceramics with the grinding machine, the reinforced headstock with the high damping material is demanded. Since the fiber reinforced composite materials have excellent properties for structures, owing to its high specific modulus, high damping and low thermal expansion, it is expected that the dynamic and thermal characteristics of the headstock will be improved if they are employed as the materials fur headstock. In this paper, the design and the manufacturing methods as well as the static and dynamic characteristics of a steel-composite hybrid headstock were investigated analytically and experimentally to improve the performance of the grinding machine system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.953-956
• /
• 1997

Micro drilling characteristics by EDM method was investigated. In detail, Micro tool electrode for EDM drilling was machined by use of WEDG method and micro hole was drilled using the machined tool electrode in SUS plate. The machining accuracy and time was compared in a different dielectric fluid. As a result, it was convinced that this method could be utilized as a fabrication technology of micro mold or micro 3 dimensional parts.

• 한국수산과학회지
• /
• 제29권5호
• /
• pp.578-585
• /
• 1996

정어리, 명태 및 오징어육을 $-20^{\circ}C,\;-40^{\circ}C$및 $-80^{\circ}C$에서 동결하고 hammer mill에 의한 분쇄적성과 분쇄물의 mass colloider에 의한 마쇄 특성을 조사하였다. 정어리, 명태 및 오징어육은 $-40^{\circ}C$ 및 $-80^{\circ}C$로 동결할 경우 hammer mill에 의해 분쇄가 가능하였고 분쇄물은 mass colloider에 의해 마쇄가 가능한 것으로 나타났다. 어육별 동결분쇄물의 입도분포는 오징어, 정어리, 명태순으로 큰 입자의 비율이 높은 것으로 나타났다. 한편 동결분쇄물의 입자분포는 동결온도에 따라 차이를 보여 $-40^{\circ}C$ 보다는 $-80^{\circ}C$ 동결군의 입도가 작게 나타나는 경향을 보였다. 한편 동결온도가 다른 어육의 동결분쇄입자들에 대하여 image analysis를 행한 결과, $-40^{\circ}C$ 처리구는 짓이겨진 형태를 보인 반면 $-80^{\circ}C$ 처리구는 예리하게 끊어진 형태를 보였다. 또한 어종간의 조직특성이 관찰되어 어종 및 동결온도에 의해 동결분쇄물의 입도 분포 및 물성이 다를 수 있음이 시사되었다. 동결마쇄물의 수율은 정어리 $62.5\%$, 명태 $56.9\%$, 오징어 $52.5\%$로 나타났으며 오징어를 제외한 명태 및 정어리육의 마쇄물은 특히 뼈에서 유래되는 Ca의 함량비가 $6\~8$배 높은 특성을 보이고 있었다. 또한 동결마쇄물의 품질지표의 하나인 유화능을 측정한 결과, 대조군에 비해 다소 낮게 나타났으나 어육의 가공에는 충분히 적용가능할 것으로 평가되어 hammer mill과 mass colloider를 이용한 어육의 동결마쇄기법은 향후 관련분야에 이용성이 클 것으로 생각된다.

• Journal of Biosystems Engineering
• /
• 제39권2호
• /
• pp.122-133
• /
• 2014

Purpose: This study was to develop an effective process for fabricating biocompatible calcium phosphate powders (CPPs) using horse bones, and to investigate the characteristics of them. Methods: The characteristics of horse bone powders (HBPs) were investigated according to the different osseous tissue types (compact bone and cancellous bone), bone types (spine and tibia), pretreatment methods (cold water, $H_2O_2$, and hot water), sintering time (4, 8 and 12h), and sintering temperature (600, 900, 1100 and $1300^{\circ}C$). In addition, the grinding methods were compared based on the wet grinding (ball mill) and dry grinding (blade grinder) method to make it as powders. Finally, their cytotoxicity and cell viability were checked. Results: Regardless of the types of osseous tissues and bones, HBPs were well fabricated as biocompatible CPPs. It was also found that the pretreatment methods did not influence on the resultants, showing well-fabricated HBPs. Considering the processing time, the hot water method was the most suitable compared to other pretreatment methods. Further, 12h-sintering time was sufficient to remove residual organic compounds. The sintering temperatures greatly affected the properties of bone powders fabricated. The x-ray diffraction (XRD) peak of horse bone sintered at $600^{\circ}C$ was most closed to that of hydroxyapatite (HA). Our bioactivity study demonstrated that the HBPs fabricated by sintering horse bones at $1300^{\circ}C$ showed the best performance in terms of cell viability whereas the HBPs $1100^{\circ}C$ showed the cytotoxicity. Conclusions: Using various types of horse bone tissues, biocompatible CPPs were successfully developed. We conclude that the HBPs may have a great potential as biomaterials for various biological applications including bone tissue engineering.