• Design & Manufacturing
• /
• v.17 no.2
• /
• pp.42-46
• /
• 2023

Currently, fossil resources are depleting rapidly. We are looking for energy to replace fossil fuels. They are trying to use electricity to replace internal combustion locomotives. Secondary battery raw materials and chemical additives are pulverized by the high-speed rotation of the grinding disc of the Classifier Separator Mill. Grinding Disc Assembly requires characteristics to withstand abrasion, corrosion, high-speed rotational force and impact. Domestic and foreign grinding discs were analyzed through abrasion resistance, hardness, bending strength, and tensile adhesion strength tests.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.5
• /
• pp.395-401
• /
• 2014

Development of five axis tool grinding machine and CAD/CAM systems increase tool design flexibility. In this research, investigated are cutting characteristics of ball-end mill with different helix angle. Special WC ball-end mills with $0^{\circ}$, $10^{\circ}$, $20^{\circ}$, $30^{\circ}$ helix angles are designed and used in various cutting tests. Machining performance according to helix angle variation is evaluated from cutting forces, surface roughness, tool wear, produced chip shape, and vibration characteristics. The ball-end mill with $10^{\circ}$ helix angle shows the best cutting performance due to appropriate chip load distribution and smooth chip flow. This research can be used for cutting edge geometry optimization and novel design of ball-end mill.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.1001-1004
• /
• 2000

As tools for machining precision components, end mills and ball end mills are widely used. For the end mills have longer cylindrical shape comparing diameter, liable to deflect and induce deterioration of surface roughness. Tool geometry parameters and cutting process have complex relations with each other. So, It is hard to determine hew to select optimal tool geometry. So, to improve the stiffness, relationship between cutting process and tool geometry must be studied. In this study, relations between grinding wheel geometry, setting condition and tool geometry are revealed. For the purpose of studying relations between each parameter, the equivalent diameter of tool has been calculated assuming tool as a simple beam. By the various cutting simulations and experiments, tool geometry and cutting process has been studied.

• Journal of Biosystems Engineering
• /
• v.26 no.1
• /
• pp.47-56
• /
• 2001

In order to prevent the possibility of mixing of metal powder during food grinding processing with the metal roll mill this study was conducted to develope the materials of ceramics roll as a substitute of gray cast iron mill. Since the ceramics is brittle material and can be broken easily by a crack, it was needed to develope engineering ceramics roll materials with high elastic modulus and fracture toughness. Adding 0∼50 wt% Al$_2$O$_3$as densification additives to porcelain body material and forming the ceramics an different condition, mechanical properties were evaluated. The material structure’s densification process was analyzed by SEM and XRD. The evaluation of the mechanical properties of ceramics roll materials were compared and analyzed by non-destructive test using Young’s modulus and destructive test using 3-point bending strength and fracture toughness. The results showed several correlative results. Porcelain body material with 40 wt% Al$_2$O$_3$content heated at 1,200$\^{C}$ for 5h was high bulk density of 2.77, Young’s modulus of 118.4Gpa, 3-point bending strength of 137 MPa and fracture toughness of 2.88 MPa$.$m$\^$$\sfrac{1}{2}$/ . After analyzing the relationship between non-destructive test and destructive test, the coefficient of determination was more than 0.9. Therefore, the evaluation of non-destructive test by ultrasonic was turned out to be feasible in evaluating the mechanical properties of ceramics.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2001.07a
• /
• pp.220-225
• /
• 2001

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1999.12a
• /
• pp.234-243
• /
• 1999

• Resources Recycling
• /
• v.23 no.3
• /
• pp.44-50
• /
• 2014

In this study, a method of shear crushing and a two-stage disk mill were introduced to grind the waste tire powder. Rubber chips with various size were obtained during the crushing or grinding step. The two-stage disk mill was composed of two drum-type blades rotating at various speed and in opposite directions. Therefore, more roughly surfaced particles of micronized waste tire powder were obtained using shear crushing rather than using conventional cutting crushing. In this study, the shape of shear-crushed waste tire particles was compared with conventional cutting crushing particles by scanning electron microscope. In addition, the particle size analyzer was employed to determine the appropriate particle size of waste ground tire powders obtained in this study.

• Resources Recycling
• /
• v.11 no.2
• /
• pp.20-27
• /
• 2002

This study was to develop the triboelectrostatic separation technique to recycle the coal from about 20% of mill reject products remained by grinding process in the coal thermoelectric power plant. In this study, we get a test results that can product the cleaned coal of 15% ash content and 66.23% recovery from mill reject of 47% ash content. And then, from the result of the releases analysis, we proved the excellence of treatment method, after showing the treament processing which is able to get 80% of recovery of coal from 20% of ash content demanded in the power plant.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.257-262
• /
• 2002

본 연구에서는 분쇄방법에 따른 감초 분쇄생성물의 특성을 분석한 결과는 다음과 같다. 1. Hammer mill의 경우 d$_{80}$=750$\mu\textrm{m}$로 중간미분쇄의 입도범위를 가지며 비표면적은 0.269m/g로 분석되었고, Pin mill의 경우 d$_{80}$=600$\mu\textrm{m}$로 Hammer mill보다 입자크기는 조금 작으나 중간미분쇄영역의 입도범위를 가지며 비표면적은 0.324m$^2$/g로 분석되었고, Turbo mill은 d$_{80}$=250$\mu\textrm{m}$와 비표면적은 0.370m$^2$/g로 입자의 크기가 가장 작아 다른 분쇄기보다 분쇄능이 가장 우수한 것으로 분석되었다. 2. Hammer mill의 분쇄메커니즘은 대부분 충격, 일부 전단과 마찰에 의해 분쇄가 행해지고, Pin mill은 핀 사이에서의 전단, 충격, 마찰에 의해 분쇄된다. 즉 충격과 마찰에 의한 분쇄는 전단력에 의한 분쇄메커니즘보다 분쇄 능이나 분쇄효율이 상대적으로 낮은 것을 알 수 있었으며 주로 전단력과 충격, 반발력에 의해 분쇄가 이루어지는 Turbo mill의 분쇄능 및 분쇄 효율이 우수함을 알 수 있었다. 본 연구에 의해서 감초와 같이 섬유질을 많이 함유하고 있는 원료를 분쇄할 경우 분쇄메커니즘이 전단력인 분쇄기가 가장 적합하고, 분쇄중 소요되는 동력 면에서도 기존 분쇄기보다 우수한 Turbo mill의 분쇄조건을 확립해야 한다고 사료된다. 사료된다.

• Applied Chemistry for Engineering
• /
• v.8 no.5
• /
• pp.811-815
• /
• 1997

The present work describes the effect of dry grinding of a mixture composed of $Y_2O_3$, $BaCO_3$ and CuO powders with a planetary ball mill before heat treatment on crystal structure and superconductivity in the $YBa_2Cu_3O_{7-y}$. The specific surface area of the ground product of mixture decreased with an increase in the grinding time, after showing an upward trend up to 60 minutes of grinding. The critical current density, which was influenced by the grinding time of mixture, indicates the maximum value of about $150A/cm^2$ in the case of 60 minutes grinding, while the critical temperature, which were around 90K, for the sintered bodies were almost independent of the grinding time.