• Environmental Engineering Research
• /
• v.20 no.2
• /
• pp.163-169
• /
• 2015

In this study, we attempted to solubilize protein in slaughter blood (SB) using ultrasonic technology. The application of ultrasonic technology can make enzymatic degradation of SB more effective, which has no comparable alternative for treatment. The SB was homogenized by grinding it for 10 minutes at 10,000 rpm as a pretreatment for preventing its clotting, and then ultrasonic treatment was attempted to solubilize protein in SB. To maximize the efficiency of ultrasonic treatment for SB, the optimum condition of ultrasonic frequency (UF) was determined to be 20 kHz. To optimize the operation conditions of ultrasonification with 20 kHz of frequency, we used response surface methodology (RSM) based on ultrasonic density (UD) and ultrasonification time (UT). The solubilization rate (SR) of protein (%) was calculated to be $101.304-19.4205X_1+0.0398X_2+7.9411X_1{^2}+0.0001X_2{^2}+0.0455X_1X_2$. From the results of the RSM study, the optimum conditions of UD and UT were determined at 0.5 W/mL and 22 minutes, respectively, and SB treated under these conditions was estimated to have a 95% SR. Also, experimentally, a 95.53% SR was observed under same conditions, accurately reflecting the theoretical prediction of 95%.

• Journal of Welding and Joining
• /
• v.31 no.4
• /
• pp.73-79
• /
• 2013

Burr grinding, Tungsten Inert Gas (TIG) dressing, ultrasonic impact treatment, and peening are used to improve fatigue life in steel structures. These methods improve the fatigue life of weld joints by hardening the weld toe, by improving the bead shape, and by creating the compressive residual stress. In this study, a new post-weld treatment method improving the weld bead shape and metal structure at the welding zone using Friction Stir Processing (FSP), a welding process, is proposed to enhance fatigue life. For that, a pin-shaped tool and processing condition employing Friction Stir Processing (FSP) is established through experiments. Experimental results revealed that fatigue life is improved by around 50% compared to as-welded fatigue specimens by reducing the stress concentration at the weld toe and by generating a metal structure finer than that of flux-cored arc welding (FCAW).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.487-488
• /
• 2006

As DLC coating possesses such features as, high hardness, high elasticity, abrasion resistance and chemical stability, there have been exerted continuous efforts in research works in a variety of fields, and this technology has also been applied widely to industrial areas. In this research work, the optimal grinding condition was identified using Microlens Process Machine in order to contribute to the development of aspheric glass which is to be used for mobile phone module having 2 megapixel and $2.5{\times}$ zoom, and mold core (WC) was manufactured having performed ultra-precision machining and effects of DLC coating on shape accuracy(P-V) of mold core and surface roughness(Ra) as well were measured and evaluated.

• Korean Journal of Materials Research
• /
• v.9 no.6
• /
• pp.615-621
• /
• 1999

The new process in order to fabricate of Ni catalyst with high activity by the mechanochemical(MC) method which was combined the mechanical alloying(MA) and the chemical treatment process. The microstructure and characterization of mechanically alloyed Ni-5-wt% Al powder and Ni catalyst gained by alkali leaching were investigated byt he various analysis such as XRD, SEM-EDS, HRTEM and laser particle analyzer. The steady state powder with 1~2$\mu\textrm{m}$ mean particle size was obtained after 30hr milling with the PCA of 2 wt% stearic acid under the condition of grinding stainless steel ball to powder ratio of 60:1 and rotating speed fo 300rpm. According to result of HRTEM diffraction pattern, MA powder of the steady state was nanocrystalline $Al_3$$Ni_2$ intermetallic compound. Ni catalyst was obtained after KOH leaching of the steady state powder was about 20nm nanocrystalline which contained about 8 wt % Al.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.1
• /
• pp.11-17
• /
• 2013

The use of wasted concrete can settle the environmental pollution and shortage of natural aggregate. However, recycled aggregate includes substantial amount of cement paste, so that these aggregates are more porous, and less resistant to mechanical actions than natural aggregates. Recently, the new manufacturing processes of high quality recycled aggregates were suggested such as heating. In this paper, for the purpose of manufacture of high quality recycled aggregates, the heating processes was considered to the existing process of recycled aggregates. To find the optimum process, the experiment was performed through the statistical design of experiment. The heating temperatures of 4 levels (300, 450, 600 and $750^{\circ}C$) and heating duration time (5, 20, 40, 60minute) were main experimental variables. Through the test results, it was found that the optimum manufacturing condition of coarse recycled aggregate was evaluated to be $600^{\circ}C$ and 40minute.

• Journal of the Korea Institute of Building Construction
• /
• v.2 no.2
• /
• pp.129-134
• /
• 2002

The strength and durability of concrete are affected by various factors such as the quality of material, mixing ratio, construction, the method of cure, time elapsed. the condition of test and etc., it is very difficult to pre-estimate the strength of concrete with the use of experimental specimen. The domestic standard of specimen cylindrical type and its sizes are both l0cm$\times$20cm and 15cm$\times$30cm, which are prescribed in KS F2405, and the loading speed is prescribed to test with 2~3kgf/$\textrm{cm}^2$ per second. The loading speed should have great effect on the compressive strength, but in reality in the construction site sometimes the loading speed is applied so dubiously that the value of the compressive strength can be unreliable. And the cross sectional area of a specimen should be level and smooth, otherwise it can be broken at a lower stress than the real strength through the eccentric or intensive working of the load. Capping should be carried out in order to measure the strength correctly. And used for capping are various materials such as capping compound, cement glue, plaster, mechanical grinding and etc. In this study, therefore, I have carried out an experiment on the relationship among the loading speed, the ratio of height to diameter of specimen, the method of capping, and the compressive strength, for the efficient quality control of concrete structures. So this study has been purposed to provide some basic data that can be used effectively at construction sites.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.5
• /
• pp.8-13
• /
• 2012

The flexography ink has disadvantage in a deinking process because it tends to form too fine particles in alkali condition to be removed in flotation deinking. The influence of pH conditions on the particle size of phthalocyanine cyan ink used for flexo-printing was investigated to see the effect of pH conditions on flexography ink dispersion. Flexography ink particles prepared by grinding dried ink films were used in this experiment. Greater reduction of the ink particle size was noticed under alkaline pH condition, which was attributed to dissolution of resin component of the ink. Adsorption behavior of flexography ink onto pigment particles was examined using clay and talc as substrate pigments. Pretreatment of inorganic pigments with a cationic poly-DADMAC increased the surface adsorption of flexography ink particles, which improved the removal of the inks by centrifugal sedimentation of inorganic pigments. Most efficient removal of the ink particles was achieved when an optimal addition level of the cationic polymer was used for pretreatment of inorganic pigments, and this optimal addition level corresponds to the surface saturation point of the polyelectrolyte. Adsorption of flexography ink particles onto inorganic pigments improved the ink removal in flotation deinking since the pigment particles has the optimal particle size for flotation deinking.

• Food Science and Preservation
• /
• v.20 no.4
• /
• pp.592-596
• /
• 2013

To stabilize the basal extraction conditions of Leonuri herbal products, three kinds of Leonurus sibiricus water extracts were prepared with different extraction conditions (boiling extraction (I), high thermal process & boiling extraction (II), and wet grinding & boiling extraction (III)), and their physiological properties were investigated. The extraction yields of the L. sibiricus water extracts were from 13.02 to 15.90%, with no significant difference among them. The polyphenol contents were significantly high in extracts (II) and (III) than in extract (I). The $IC_{50}$ for the electron-donating ability was the smallest in extracts (II), (III) and (I) in ascending order. The ABTS radical scavenging ability was significantly higher in extracts (II) and (III) than in extract (I). Also, the ACE in hibition ability for 5 mg/mL of each extract was high in extracts (II) and (III), but there was no significant difference among the three extracts in terms of their nitrite scavenging abilities. Extraction processes (II) and (III) were shown to be useful for preparing Leonurus sibiricus water extracts with healthful properties.

• The Journal of Internal Korean Medicine
• /
• v.16 no.2
• /
• pp.146-177
• /
• 1995

The purpose of this study was to investigate the relationship between the teeth and Zhang-Fu(臟腑), dental diseases, and the hygiene of the mouth through the literature of oriental medicine. First, the relatonship between the teeth and Zhang-Fu is reviewed as follows: The teeth are influenced by Shen(腎) because they are the end of bone and Biao(標) of Shen. Gingiva is related to Wei(胃) and Da-Chang(大腸) because it is passed by Yangming-Channel(陽明經). The growth and nutrition of teeth depends on Shen. The pathological condition of Shen causes the gingival atrophy, the loose of teeth, dedentition due to aging, withering of teeth, and tartar: whereas the pathological condition of Wei and Da-Chang causes toothache, gingivitis, inflamed gums, bad breath, and gingival hemorrhage. Second, the causes and therapies of dental diseases through the literature can be summarized as follows: The major causes of toothache are the pathogenic condition of wind-heat and wind-cold, the heat syndrome of Wei, the damp-heat of intestine, flaring-up of fire of deficiency type, rotten tooth, etc... The principal causes of dedentition and the shaking and loose of teeth are the deficiency of Shen, and the rest of causes are the damp-heat of Yangming. Gingival atrophy is caused by the deficiency of Shen, whereas the gingival hemorrhage comes from the factors in the pathogenic factor of wind-heat of Yangming-Channel, the heat syndrome of stomach, and the deficiency of Shen. The causes of grinding of teeth during sleeping are stomach-heat, and the delayed dentition and the withering result from the deficiency of Shen-Jing.(腎精) The principal therapies of toothache are removing wind and heat, clearing away heat and prompting diuresis, clearing away the stomach-heat, replenishing vital essence to tonify the Shen, relieving superficial syndrome by wind-cold, and alleviating pain by destroying parasites. For the prescription of the principal therapies, there are Xijio Dihuang Tang, Jiajian Ganlu Yin, Qufeng Wan, Qingwei San, Tiaowei Chenggi Tang Shengong Wan, Liangge San Qingwei Tang Yunu Jian, Liuwei Dihuang Wan Zuogui Yin Bawei Wan Wanshao Dan, Xixin San Badou Wan Gianghuo Fuzi Tang, Jiuzi Tang Badou Wan, etc... The therapies of dedentition and the shaking and loose of teeth are replenishing vital essence to tonify the Shen, and warming and recuperating the Shen-Yang: as the prescription, there are Liuwei Dihuang Wana Zuogui Yin, and Bawei Wan Anshen Wan Wanshao Dan Yougui Wan etc... The therapies of gingival hemorrhage are clearing away the stomach-heat, replenishing vital essence to tonify the Shen, warming and recuperating the Shen-Yang(腎陽), and moisturing and purging intence heat with the prescription of Tiaowei Chenggi Tang Xijiao Dihuang Tang, Liuwei Dihuang Wan Zuogui Yin, Bawei Wan Anshen Wan, and Yunu Jian. The therapy of gingival atrophy is replenishing vital essence to tonify the Shen in the prescription of Liuwei Wan Bawei Wan Ziyin Dabu Wan. The therapies of grinding of teeth during sleeping are clearing away the stomach-heat and purging intense heat, and invigorating the spleen through eliminating dampness in the prescription of Qingwei San, Wumei Wan, etc... The therapy of delaed dentition is replenishing vital essence to tonify the Shen with the prescription of Liuwei Wan Buyin Jian, etc... Third, clinical treatment reports of dental diseases are reviewed as follows: The toothache due to stomach-heat was treated by medical herbs like Gypsum, Natrir Sulfas, Rehmanniae, Schizonepetal Herba, Menthae Folium, Cimicifugae Rhizoma, and Scrophulariae Radix. The therapies of toothache due to flaring-up of fire in deficiency type from deficiency of Shen provided with replenishment of vital essence to tonify the Shen and clean ministerial fire, and the prescription was the kind of Liuwei Wan, which worked very well. The therapy of dedentition and loose of teeth due to deficiency of Shen was done to stablize the teeth as tonifing the Shen with the prescription of Guchi Wan. The rate of imrovement was over 90%. The destruction of periodontal tissue due to periodonititis was cured of dispelling wind, reducing heat, and alleviating pain, It was improved by taking Zizhi Xingiong Tang, Guchi Xiaotong San, Yunii Jian, and Qingwei San about 3-7 days, and the rate of improvement was over 80%. Fourth, the prevention and regimens are reviewed as follows: As a physical and breathing exercise of the teeth, tapping teeth which stimulates the circulation of Qi(氣) and Xue(血) had been used. The tapping time of 14, 17, 36, etc... has been reported, and it should be applied based on the body condition. The medical herbs for gargling and brushing teeth have been used. Specifically, Cimicifugae Rhizoma, Gypsum, Gypsum Fibrosum, and Indigo pulrelrata Lereis have been used to reduce heat, Coptidis Rhizama and Yang Jinggu to eliminate damp-heat, Amomi Semen, Cyperi Rhizoma, Flos Caryophylli, Asari Radix, Piperis Longi Fructus, Santali Albae Lignum, Meliae Fructus, Moschus, Aquillaiae Lignum, and Borneol to promote the circulation of Qi and to relieve pain, Ligustici Radix, Angelice Radix, Rhizoma Nardostachydis, Tribuli Semen to relieve superficial syndrome by means of diaphiresis, and Cnidii Rhizoma, Angelicae sinensis Radix, and Olibanum to promote blood circulation to stop pain.

• Resources Recycling
• /
• v.21 no.4
• /
• pp.44-52
• /
• 2012

The purpose of this study is to confirm the possibility of obtaining high grade coal from fixed carbon 20.68% coal. Also, the mineralogical, physical/chemical and liberation characteristics was found with the aim of decrease in ash amount, during the pre-processing of clean coal technology. In this study, batch flotation and microbubble column flotation that was appropriate for the processing of fine particles was used with the variation in kinds and quantity of frother, collector and depressant. Also grinding time, air flow rate and feeding rates were examined. As a result of batch flotation, using pulp density 20%, collector DMU-101+dodecyl amine(100 mL/ton), frother pine oil (200 mL/ton), depressant sodium silicate(1 kg/ton), obtained the result of ash rejection 81.55% and combustible recovery 70.23%. In result of microbubble column flotation, the result was ash rejection 83.85% and combustible recovery 70.42% under the condition of pulp density 5%, grinding time 5 min. collector DMU-101+DDA(100 mL/ton), frother AF65(5.4 L/ton), depressant SMP(3.5 kg/ton), wash water(360 mL/min.) and air flow rate(1,197 mL/min.).