DOI QR코드

DOI QR Code

An Experimental Study on the Compressive Strength of High Strength Concrete According to Testing Condition

시험조건과 고강도콘크리트의 압축강도 관계에 관한 실험적 연구

  • 진영길 (원광대학교 건축공학과) ;
  • 이용수 (원광대학교 건축공학과) ;
  • 김광서 (원광대학교 건축공학과)
  • Published : 2002.05.01

Abstract

The strength and durability of concrete are affected by various factors such as the quality of material, mixing ratio, construction, the method of cure, time elapsed. the condition of test and etc., it is very difficult to pre-estimate the strength of concrete with the use of experimental specimen. The domestic standard of specimen cylindrical type and its sizes are both l0cm$\times$20cm and 15cm$\times$30cm, which are prescribed in KS F2405, and the loading speed is prescribed to test with 2~3kgf/$\textrm{cm}^2$ per second. The loading speed should have great effect on the compressive strength, but in reality in the construction site sometimes the loading speed is applied so dubiously that the value of the compressive strength can be unreliable. And the cross sectional area of a specimen should be level and smooth, otherwise it can be broken at a lower stress than the real strength through the eccentric or intensive working of the load. Capping should be carried out in order to measure the strength correctly. And used for capping are various materials such as capping compound, cement glue, plaster, mechanical grinding and etc. In this study, therefore, I have carried out an experiment on the relationship among the loading speed, the ratio of height to diameter of specimen, the method of capping, and the compressive strength, for the efficient quality control of concrete structures. So this study has been purposed to provide some basic data that can be used effectively at construction sites.

Keywords

References

  1. 건교부, "콘크리트구조설계기준" 한국콘크리트학회, 대한 건축학회, 1999
  2. 박승범, "최신토목재료실험" ,문운당, 1994
  3. 진영길, "콘크리트 공시체 크기에 따른 압축강도 및 탄성계수의 실험적 연구" 대한건축학회논문집, Vol.17 No.2
  4. 김진근외, "비표준형 실린더공시체에 대한 콘크리트압축강도의 크기효과" 콘크리트학회지, Vol.9 No.1 1997.2
  5. 友呎史紀外, "高さと直俓の比2以下の供試f体によると壓縮强度およひ靜彈性係數の評價" 日本建築學會學術講演集, 昭和60年
  6. 野口貴文 外, "高强度ユンク-トの壓縮力學特性に及はす供体法. 形狀の影響", 日本建築學會構造系論文集,No.473,1995.
  7. ASTM, c617-856, p380-384.
  8. ACI 318-83, "Building Code for Reinforc Concrete",American Concrete Institute