• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2008년도 학술발표회 논문집
• /
• pp.1752-1756
• /
• 2008

A simple, accurate and efficient mesh generation technique, the cut-cell method, is able to represent an arbitrarily complex geometry. Both structured and unstructured grid meshes are used in this method. First, the numerical domain is constructed with regular Cartesian grids as a background grid and then the solid boundaries or bodies are cut out of the background Cartesian grids. As a result, some boundary cells can be contained two numerical conditions such as the flow and solid conditions, where the special treatment is needed to simulate such physical characteristics. The HLLC approximate Riemann solver, a Godunov-type finite volume method, is employed to discretize the advection terms in the governing equations. Also, the TVD-WAF method is applied on the Cartesian cut-cell grids to stabilize numerical results. Present method is validated for the rectangular dam break problems. Initially, a conventional grid is constructed with the Cartesian regular mesh only and then applied to the dam-break flow simulation. As a comparative simulation, a cut-cell grids are applied to represent the flow domain rotated with arbitrary angles. Numerical results from this study are compared with the results from the case of the Cartesian regular mesh only. A good agreement is achieved with other numerical results presented in the literature.

• Nuclear Engineering and Technology
• /
• 제33권1호
• /
• pp.93-101
• /
• 2001

The spacer grid is one of the main structural components in the fuel assembly, which supports the fuel rods, guides cooling water, and protects the system from an external impact load, such as earthquakes. Therefore, the mechanical and structural properties of the spacer grids must be extensively examined while designing them. In this paper, a numerical method for predicting the buckling strength of spacer grids is presented. Numerical analyses on the buckling behavior of the spacer grids are performed for a various array of sizes of the grids considering that the spacer grid is an assembled structure with thin-walled plates and imposing proper boundary conditions by nonlinear dynamic finite element method using ABAQUS/Explicit. Buckling tests on several numbers of specimens of the spacer grid were also carried out in order to compare the results between the test and the simulation result. The drop test is accomplished by dropping a carriage on the specimen at a pre-determined position. From this test, the specimens are buckled only at the uppermost and the lowermost layer among the multi-cells, which is similar to the local buckling at the weakest point of the grid structure. The simulated results also similarly predicted the local buckling phenomena and were found to give good correspondence with the experimental values for the thin-walled grid structures.

• 한국수자원학회논문집
• /
• 제36권4호
• /
• pp.705-713
• /
• 2003

본 연구에서는 근해 지진해일에 의한 원형섬 주변에서의 처오름높이를 산정하기 위하여 사면구조(quadtree) 격자기법을 이용한 수치모형을 개발하였다. 비선형 천수방정식을 지배방정식으로 사용하였으며, 적합화된 계층적 사면구조 격자를 이용하여 leap-frog 기법으로 양해적으로 유한차분하였다. 원형섬 주위를 따라 적용된 사면구조 격자는 사각형 및 원형의 형상으로 세밀화 되었다. 계산된 수치해석결과를 검증하기 위해 수리실험결과와 비교하였으며, 본 연구의 결과는 수리실험결과와 양호하게 일치하였다.

• Journal of Electrical Engineering and Technology
• /
• 제7권6호
• /
• pp.834-844
• /
• 2012

Nonlinear electronic loads draw harmonic currents from the power grids that can cause energy loss, miss-operation of power equipment, and other serious problems in the power grids. This paper proposes a harmonic compensation method using multiple distributed resources (DRs) such as small distributed generators (DGs) and battery energy storage systems (BESSs) that are integrated to the power grids through power inverters. For harmonic compensation, DRs should inject additional apparent power to the grids so that certain DRs, especially operated in proximity to their rated power, may possibly reach their maximum current limits. Therefore, intelligent coordination methods of multiple DRs are required for efficient harmonic current compensation considering the power margins of DRs, energy cost, and the battery state-of-charge. The proposed method is based on fuzzy multi-objective optimization so that DRs can cooperate with other DRs to eliminate harmonic currents with optimizing mutually conflicting multi-objectives.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.314-314
• /
• 2013

Recently, flexibility is one of the hottest issues in the field of electronic devices. For flexible displays or solar cells, a development of transparent conductive electrodes (TCEs) with flexibility, bendability and foldability is an essential element. Hundreds of nanometers indium-tin-oxide (ITO) films have been widely used and commercialized as a transparent electrode, but their brittleness make them difficulty to apply flexible electronics. Many researchers have been studying for flexible TCEs such as a few layers of graphene sheets, carbon nanotube networks, conductive polymer films and combinations among them. Although gained flexibility, their transmittance and resistivity have not reached those of commercialized ITO films. Metal grids electrode cannot act as TCEs only, but they can be used to lower the resistance of TCEs with few losses of transmittance. However, the possibility of device shortage will be rise at the devices with metal grids because a surface flatness of TCEs may be deteriorated when metal grids are introduced using conventional methods. In our research, we have developed hybrid TCEs, which combined tens of nanometers ITO film and metal grids which are embedded in flexible substrate. They show $13{\Omega}$/${\Box}f$ sheet resistance with 94% of transmittance. Moreover, the sheet resistance was maintained up to 1 mm of bending radius. Also, we have verified that flexible organic light emitting diodes and organic solar cells with the TCEs showed similar performances compared to commercial ITO (on glass substrate) devices.

• Nuclear Engineering and Technology
• /
• 제28권2호
• /
• pp.162-174
• /
• 1996

서로 다른 지지격자들이 인접한 6$\times$6 핵연료 봉다발부수로내에서 국부 수력특성인자들을 레이저 유속 측정 장치인 LDV(Laser Doppler Velocimeter)를 이용하여 측정하였다. 6$\times$6 봉다발은 서로 다른 지지격자를 가진 3$\times$6 봉다발이 서로 인접하여 이룬 형상이다. 본 연구에서는 다른 형상과 다른 수력저항을 갖는 지지격자간들의 열수력적 상호작용을 규명하는데 그 목적이 있다. LDV를 이용하여 축방향 및 횡방향 속도, 난류강도 등의 측정 인자들을 측정하였다. 또한 압력강하를 측정하여 지지격자의 손실계수와 봉다발의 마찰계수를 구하였다. 수력실험결과에 근거하여 지지격자에 기인된 열혼합현상에 관한 것을 연구하였다. DNB의 정성적인 기준이라고 할 수 있는 swirl인자를 정의하고 횡방향속도 실험인자로부터 구하였다.

• 전기학회논문지
• /
• 제65권12호
• /
• pp.2109-2112
• /
• 2016

The rate of rise of the fault current in DC grids is very high compared to AC grids because of the low line impedance of DC lines. In AC grids the arc of the circuit breaker under current interruption is extinguished by the zero current crossing which is provided naturally by the system. In DC grids the zero current crossing must be provided by the circuit breaker itself. Unlike AC girds, the magnetic energy of DC grids is stored in the system inductance. The DC circuit breaker must dissipate the stored energy. In addition the DC breaker must withstand the residual overvoltage after the current interruption. The main contents of this paper are to ${\cdot}$ Explain the theoretical background for the design of DC circuit breaker. ${\cdot}$ Develop the simulation model in PSIM of the real scaled DC circuit breaker for 1,800V DC railway. ${\cdot}$ Suggest design guidelines for the DC circuit breaker based on the experimental work, simulations and design process.

• Nuclear Engineering and Technology
• /
• 제25권3호
• /
• pp.381-393
• /
• 1993

이 논문은 하강하는 물의 막과 상승하는 공기유동으로 구성된 수직 다봉채널내서의 역유동 플러딩에 관한 실험결과를 발표한 것이다. 특히 다봉속에 혼합깃이 있는 것과 없는 스페이서 그릿 및 블럭키지가 프러딩의 거동에 미치는 영향이 조사되었다. 시험부에는 5$\times$5 지르칼로이관속이 사용되었다. 플러딩에 관한 전의 해석적 모델과 실험적 상관식들을 본 실험결과와 비교한즉 기존의 모델과 상관식들이 매우 높은 플러딩 곡선을 예측함이 발혀졌다. 스페이서 그릿은 이것이 없는 봉속과 비교하면 낮은 플러딩 공기유량을 나타낸다. 그러나 혼합깃이 있는 스페이서 그릿은 이것이 없는 스페이서 그릿에 비하여 높은 플러딩 공기유량이 요구된다. 블럭키지를 가진 봉속은 더욱더 높은 플러딩 공기유량을 갖는다. 세가지 형식의 시험봉 속에 대한 실험적 플러딩 상관식이 얻어졌다.

• 전기학회논문지P
• /
• 제65권3호
• /
• pp.194-198
• /
• 2016

The electric power industry have recently been building out Smart Grids, a two-way electricity grid that connects power consumers and producers to a network that enables one to respond quickly to any eventuality. The construction of a two-way electricity grid means that the power control process becomes unified, from what used to be separate processes that originate individually from the consumption phase and the production and supply phases. The role of power control that takes place within each section of the power system may be independent. However, this does not mean the independent control sections are operated individually, but are configured to meet a single target and purpose. Each control section possesses enough degree of independency to respond to eventualities that may occur within different stages of the power system, but at the same time, possesses unified system elements for the stability of the entire power system. From this perspective, Smart Grids are widely regarded as the most rational power industry operation plan. A variety of different control and communication systems can be applied for an effective deployment of Smart Grids. Recently, we have seen systems such as PMS(Power Management System) and PAS(Process Automation System) applied in the deployment of Smart Grids, which are developed from the techniques utilized in the industry. The PMS is attracting particular attention for its power operations management ability. In this study, we propose plans for improvement in the rational development of power system controls through case studies of live PMS operations.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권4호
• /
• pp.425-433
• /
• 2012

As the demand for electric power increases rapidly and the amount of fossil fuels decreases year by year, making use of renewable resources seem very necessary. However, due to the discontinuous nature of renewable resources and the hierarchical topology of existing grids, power quality and grid stability will deteriorate as more and more distributed generations (DGs) are connected to the grids. It is a good idea to combine local utilization, local consumption, energy storage and DGs to form a grid-friendly micro grid, these micro grids can then assembled into an intelligent power system - the smart Grid. It can optimize power flow and integrate power generation and consumption effectively. Most importantly, the power quality and grid stability can be improved greatly. This paper depicts how the smart grid addresses the current issues of a power system. It also figures out the key technologies and expectations of the smart grid.