• 한국전기전자재료학회논문지
• /
• 제23권7호
• /
• pp.575-579
• /
• 2010

The technologies of Ni/Cu plating contact is attributed to the reduced series resistance caused by a better contact conductivity of Ni with Si and the subsequent electroplating of Cu on Ni. The ability to pattern narrower grid lines for reduced light shading was combined with the lower resistance of a metal silicide contact and an improved conductivity of the plated deposit. This improves the FF (fill factor) as the series resistance is reduced. This is very much requried in the case of low concentrator solar cells in which the series resistance is one of the important and dominant parameter that affect the cell performance. A Selective emitter structure with highly dopeds regions underneath the metal contacts, is widely known to be one of the most promising high-efficiency solution in solar cell processing In this paper the formation of a selective emitter, and the nickel silicide seed layer at the front side metallization of silicon cells is considered. After generating the nickel seed layer the contacts were thickened by Cu LIP (light induced plating) and by the formation of a plated Ni/Cu two step metallization on front contacts. In fabricating a Ni/Cu plating metallization cell with a selective emitter structure it has been shown that the cell efficiency can be increased by at least 0.2%.

• 한국물환경학회지
• /
• 제22권3호
• /
• pp.534-539
• /
• 2006

The supply of oxygen for aeration is the largest energy consumer at activated sludge wastewater treatment plants. Replacement of less efficient aeration systems with fine pore aeration devices can save up to 50 percent of aeration energy costs. The purpose of this study was the diagnosis and evaluation of a domestic wastewater aeration system by the off-gas method which had been studied by US EPA and ASCE. For this study, an off-gas analyzer and its hood were made to collect off-gas. Also, a vacuum pump was connected to the analyzer to make suction of off-gas. Experiments were conducted at a domestic activated sludge wastewater treatment plant which had a single spiral roll aeration system installed with P.E tube diffuser. Data on OTE(f), SOTE(pw), OUR, and air flow rate were obtained from these experiments. In case of replacing an aeration system, it is recommended that it should be replaced with perforated membrane disc or ceramic disc fine bubble diffusers installed in a full floor coverage or grid pattern.

• 한국측량학회지
• /
• 제7권2호
• /
• pp.53-61
• /
• 1989

본 연구에서는 규칙격자형태의 자료에서 수치지형모델의 보간법이 적절히 적용될 수 있는 지형의 정량적분류 변수를 제시하고, 이 변수를 사용하여 군집분석함으로써 객관적인 지형분류를 확립하며, 또한 지형의 분류변수에 의한 판별 분석으로 임의의 지형이 분류된 지형군 중 어느 지형에 속하는지 판별하여 지형특성에 적절한 보간법을 적용하는 데에 그 목적이 있다. 본 연구에서 지형분류는 수평면적에 대한 경사면적의 비와 조화벡터량의 두 변수를 사용하여 대상지형을 3개의 지형군으로 나눌 수 있었다. 3개의 지형군은 판별함수식으로 구별할 수 있었으며, 임의 지형에 대해 수평면적에 대한 경사면적의 비와 조화벡터량을 구하고, 판별함수를 이용하여 지형특성에 맞는 보간법을 적용할 수 있었다.

• 해양환경안전학회지
• /
• 제20권6호
• /
• pp.746-751
• /
• 2014

본 논문에서는 소스 코드가 공개된 라이브러리를 이용하여 선박의 성능을 예측할 수 있는 해석 코드를 개발하였다. 질량보존 방정식, 모멘튼 보존방정식, 난류를 고려하기 위해 난류모델과 벽함수를 고려하였다. 자유수면 계산을 위해 볼륨비 수송방정식을 고려하였고, 자유수면의 정확도 높은 계산을 위해 고차 도식을 포함하는 라이브러리를 개발하였다. 개발한 프로그램을 컨테이너선인 KCS에 적용한 결과 실험에서 포착된 자유수면 분포를 잘 예측하였다. 자항성능 평가 시 추진기 회전을 위해 GGI 라이브러리를 사용하였다. 계산결과 실험과 비교해 약 7 % 정도의 정확도로 자항성능을 예측하였다. 캐비테이션 예측을 위해 이상 균질 모델을 포함하는 새로운 라이브러리를 개발하였다. 이상 균질 모델을 추진기에 적용한 결과 일반적으로 발생하는 얇은 층 캐비테이션을 잘 예측하는 것을 확인하였다. 오픈 소스 라이브러리를 이용하여 개발한 수치수조를 KCS에 적용한 결과 오픈 소스 라이브러리에 대한 가능성을 확인하였다.

• 디지털융복합연구
• /
• 제19권1호
• /
• pp.343-348
• /
• 2021

본 연구는 재사용 가능한 디자인 시스템 구출을 위한 프레임워크 제안을 위해 아토믹 디자인 시스템을 기반으로 블록을 구성하여 조합하는 방법에 대해 알아보았다. 그를 위해 디자인 시스템의 필요성과 스노우화이트, 스큐어모픽 디자인, 플랫디자인 및 머티리얼 디자인의 사례를 우선적으로 살펴보았다. 또 화학의 원리를 메타포로 사용하는 아토믹 디자인의 분자, 원자, 유기체, 템플릿 그리고 페이지를 문헌 연구를 통해 정의하였다. 새로운 프레임 워크를 구현하기 위해 인터페이스 인벤토리를 구성하고 그 중에서 폰트, 컬러, 이미지와 컨트롤 요소를 핵심 시각 요소로 추출하여 가이드라인을 정의하였으며 그를 바탕으로 분자 요소를 분류하고 원자로 구성할 수 있었다. 블록은 콘텐츠 인벤토리에서 가장 많이 사용되는 디자인 패턴을 기반으로 블록 형태고 구성되도록 하여 블록의 조합을 통해 시각적 그리드를 바탕으로 레이아웃을 구현하고 페이지를 디자인하도록 프레임워크를 구성하였다. 새로운 프레임워크는 블록의 재사용으로 팀의 일관성과 협업을 도우며 파일의 공유와 업데이트를 지원한다는 것에 본 논문의 의의가 있다.

• 한국해양공학회지
• /
• 제35권1호
• /
• pp.50-58
• /
• 2021

The demand for eco-friendly energy is expected to increase due to the recently strengthened environmental regulations. In particular, the flow inside the pipe used in a cargo handling system (CHS) or fuel gas supply system (FGSS) of hydrogen transport ships and hydrogen-powered ships exhibits a very complex pattern of multiphase-thermal flow, including the boiling phenomenon and high accuracy analysis is required concerning safety. In this study, a feasibility study applying the boiling model was conducted to analyze the multiphase-thermal flow in the pipe considering the phase change. Two types of boiling models were employed and compared to implement the subcooled boiling phenomenon in nucleate boiling numerically. One was the "Rohsenow boiling model", which is the most commonly used one among the VOF (Volume-of-Fluid) boiling models under the Eulerian-Eulerian framework. The other was the "wall boiling model", which is suitable for nucleate boiling among the Eulerian multiphase models. Moreover, a comparative study was conducted by combining the nucleate site density and bubble departure diameter model that could influence the accuracy of the wall boiling model. A comparison of the Rohsenow boiling and the wall boiling models showed that the wall boiling model relatively well represented the process of bubble formation and development, even though more computation time was consumed. Among the combination of models used in the wall boiling model, the simulation results were affected significantly by the bubble departure diameter model, which had a very close relationship with the grid size. The present results are expected to provide useful information for identifying the characteristics of various parameters of the boiling model used in CFD simulations of multiphase-thermalflow, including phase change and selecting the appropriate parameters.

• 한국산학기술학회논문지
• /
• 제22권3호
• /
• pp.770-776
• /
• 2021

위치 파악을 위한 시스템은 지난 몇 년 동안 적극적으로 연구 및 개발되었으며 많은 응용 분야에 적용되고 있다. 본 논문은 가속도계와 단일 축 자이로 스코프로 구성된 센서 시스템을 사용하여 실내와 실외의 넓은 공간에서 위치를 파악하는 방법을 제안한다. 가속도계와 자이로 스코프를 사용하여 사람의 움직임을 인식하는 시스템을 설계 한 후 기하학적 알고리즘을 센서 데이터에 적용하여 오차율을 줄이고자 하였다. 특히 활용성을 고려하기 위하여 센서 기기를 허리에 느슨하게 착용함으로써 실험 데이터가 실제 응용 분야에 유용하게 사용될 수 있도록 고려하였다. 반지름이 1m, 3m인 원형 트랙의 실험 결과를 바탕으로 본 논문에서는 회전 각도의 임계 값을 이용한 알고리즘을 제안하고 실험 결과에 적용하였다. 그리드 패턴 트랙 모델에 대한 추적 실험을 수행했으며, 최종 추적 지점과 목표 지점의 평균 편차는 원시 센서 데이터의 경우 약 15.2m로 확인 되었으며, 회전 각도 임계 값을 사용하는 알고리즘을 사용하여 약 4.0m로 줄일 수 있었다.

• Journal of Information Technology Applications and Management
• /
• 제28권1호
• /
• pp.83-93
• /
• 2021

The purpose of this study was to develop a personalized SMT (smart monitor target) game interface for game users who enjoy airsoft sports as individual purchases of SMT have increased since the advent of the untouched era. For this study, the UX (user experience) of the game interface was designed based on previous research. In particular, the personalized game service was reinforced by adding the CP (command post) of the SMT system that performs the home function of the console game, which was intended to help the user maintain immersed in the game in the personalized space of the SMT. Major design elements for the SMT game interface included layout, color, graphics, buttons, and text, and the interface design was proceeded based on them. After composing a grid with a layout in which the tab function was applied to the interface with a vertical three-segment structure and the outer margin value secured, the military camouflage pattern and texture were applied to the colored tone to perform graphics work. Targets and thumbnails were produced as illustrations using experts to ensure the consistency of the interface, and then function buttons and texts on each page were used concisely for intuitive information delivery. The design sources organized in this way were developed using the Unity engine. In the future, we hope that game user-centered personalized interfaces will continue to develop and provide differentiated services unique to SMT systems in the airsoft gun market.

• Journal of Forest and Environmental Science
• /
• 제37권4호
• /
• pp.280-291
• /
• 2021

The study examined the influence of climate and soil dynamics on vegetation health across the ecological zones in Rivers State, Nigeria. MODIS imagery was used to assess the vegetation health through NDVI and point grid pattern of meteorological data for total precipitation (TP), air temperature (AT), soil moisture (SM) and soil temperature (ST) of 2000, 2003, 2006, 2009, 2012 and 2015 were used for the study. Descriptive and inferential statistics were used for data analysis. Findings showed that NDVI ranged between 0.420 and 0.612 in the freshwater swamp (FWS) while between 0.465 and 0.611 in the rainforest and the NDVI in the mangrove was generally low. The highest mean AT was experienced in the mangrove ecological zone and the least was experienced in the rainforest. The mean SM was generally highest in the rainforest with highest value in 2000 (774.44 m³/m³). The ST was highest in the mangrove and the least was experienced in the rainforest while the TP was highest in the mangrove. NDVI correlated significantly with SM (r=0.720; p<0.05) and ST (r= -0.493; p<0.05). NDVI, SM, TP and ST significantly varied among the ecological zones. Regression analysis showed that vegetation health was significantly related to the combination of soil temperature and soil moisture (R²=0.641; p=0.000). Thus, monitoring the factors that affect vegetation health in a changing climate and soil environments is highly required.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권4호
• /
• pp.1123-1146
• /
• 2023

In South Korea, there have been many studies on efficient building-energy management using renewable energy facilities in single zero-energy houses or buildings. However, such management was limited due to spatial and economic problems. To realize a smart zero-energy city, studying efficient energy integration for the entire city, not just for a single house or building, is necessary. Therefore, this study was conducted in the eco-friendly energy town of Chungbuk Innovation City. Chungbuk successfully realized energy independence by converging new and renewable energy facilities for the first time in South Korea. This study analyzes energy data collected from public buildings in that town every minute for a year. We propose a smart city building-energy management model based on the results that combine various renewable energy sources with grid power. Supervised learning can determine when it is best to sell surplus electricity, or unsupervised learning can be used if there is a particular pattern or rule for energy use. However, it is more appropriate to use reinforcement learning to maximize rewards in an environment with numerous variables that change every moment. Therefore, we propose a power distribution algorithm based on reinforcement learning that considers the sales of Energy Storage System power from surplus renewable energy. Finally, we confirm through economic analysis that a 10% saving is possible from this efficiency.