• 한국자동차공학회논문집
• /
• 제3권5호
• /
• pp.82-89
• /
• 1995

The three-dimensional fluid motion through the intake port and cylinder of a single DOHC SI engine was investigated with a commercial computational fluid dynamics simulation program, STAR-CD. This domain includes the intake port, intake valves and combustion chamber. Steady induction port flows for various valve lifts have been simulated for an actual engine configuration. The geometry was obtained by direct interface with a three-dimensional CAD software for complicated port and valve shape. The computational grid was generated using the commercial preprocessor ICEM CFD/CAE. Detailed procedures were presented on the generation of the geometry and the block-structured mesh. A standard k-${\varepsilon}$ turbulent model was applied to consider the complexity of the geometry and the fluid motion. The global flow patterns and the distributions of various quantities, such as pressure, velocity magnitude around the valve seat etc., were examined. The computational results, such as mass flow rate, discharge coefficient etc., for various valve lifts were compard with the experimental results and the computational results were found in good agreement with the experiment.

• 전력전자학회논문지
• /
• 제11권4호
• /
• pp.349-360
• /
• 2006

이중여자 유도형 풍력발전 시스템은 다른 풍력발전 시스템에 비하여 에너지 변환 효율이 우수하고 전력변환 장치의 용량이 작아도 되는 특성이 있다. 이러한 특징을 살리기 위해서는 풍력발전 시스템에 입력되는 에너지의 변화를 고려하여 발전기의 제어기를 설계해야 한다. 본 논문에서는 상위 제어기와 하위 제어기로 구분하여 이중여자 유도 발전기의 제어기를 설계하였다. 상위 제어가는 풍력발전 시스템에 입력되는 에너지가 변화함에 따라서 발전기의 운전모드를 결정하고 제어 기준값을 계산한다. 발전기의 운전모드는 최저 속도 제어와 가변 토크 제어, 그리고 토크 제한 모드로 구성된다. 하위 제어기는 상위 제어기의 지령에 따라서 발전 시스템의 전류를 제어한다. 또한 본 논문에서는 3kW급 권선형 유도기를 사용한 이중여자 유도형 풍력발전기의 시뮬레이터를 제작하였다. 설계한 제어기는 시뮬레이터에 적용하여 실험적으로 검증하였다.

• 한국실내디자인학회논문집
• /
• 제19권1호
• /
• pp.137-147
• /
• 2010

The purpose of this study is to research a method of creating a new type of boundary by repeated disposition of single unit of modularized membrane successively. In the contemporary architectural indoor space, more highly dimensional analysis of boundary is required and the necessity of establishing boundary of a new concept that may satisfy cultural value, social value and artistic value as a whole as well as aesthetic and functional merit has been increased. In order to create a membrane that may fulfil the requirements of the diversified programs of space like this, an approach of complicated mechanism and high-dimensional calculation are required. At this time, digital GA modelling, parametric modelling technique may expand its range of possibility. One thing to be noted at this juncture is that indefinite expandability involved in digital modelling technique, modelling by grid of absolute and relative coordinates and convenience of systematization may surpass limitation of analogue or simple numerical calculation being progressed in the past. And in order to create solid process including unit modelling or pattern formation, Precise calculation process of computer is necessitated inevitably.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.212-213
• /
• 2007

Grid-connected PV(Photovoltaic) power generation system has experienced increasing attention in recent years. But the growing number of non-linear equipments, such as, inverters, has been demanding the compensation for the disturbances caused by them. These non-linear loads may cause poor power factor and high degree of harmonics. Installation of an AF(active filter) can be one of the solutions to mitigate the line distortion, but it requires additional costs. On the other hand, many PV systems have been interconnected to the distribution system. So, the PV system combined with the function of the active filter system can be useful for the application in the power distribution system. In this paper, PV-AF system using DSP (Digital Signal Processing) controller confirmed that it is possible to combine the AF theory to the three phase PV system connected to the utility under various irradiation conditions.

• Journal of Power Electronics
• /
• 제15권4호
• /
• pp.1119-1130
• /
• 2015

This study investigates the multi-objective fuzzy optimization of crowbar resistance for the doubly fed induction generator (DFIG) low-voltage ride-through (LVRT). By integrating the crowbar resistance of the crowbar circuit as a decision variable, a multi-objective model for crowbar resistance value optimization has been established to minimize rotor overcurrent and to simultaneously reduce the DFIG reactive power absorbed from the grid during the process of LVRT. A multi-objective genetic algorithm (MOGA) is applied to solve this optimization problem. In the proposed GA, the value of the crowbar resistance is represented by floating-point numbers in the GA population. The MOGA emphasizes the non-dominated solutions and simultaneously maintains diversity in the non-dominated solutions. A fuzzy-set-theory-based is employed to obtain the best solution. The proposed approach has been evaluated on a 3 MW DFIG LVRT. Simulation results show the effectiveness of the proposed approach for solving the crowbar resistance multi-objective optimization problem in the DFIG LVRT.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.206-207
• /
• 2007

Islanding is the electrical phenomenon in a part of a power network disconnected from the utility, where the loads are entirely supplied by PV systems, and where the voltage and frequency are maintained around nominal values. But islanding may result in power-quality issues, interference to grid-protection devices, equipment damage, and even personnel safety hazards[4]. Therefore, islanding must be detected and stopped. The existing anti-islanding methods have NDZ(None-detection Zone) or power quality degradation. But PV-AF power generation system has the function of not only shunt active filter but also anti-islanding method without NDZ. In this paper, It is proved that PV-AF system has originally the function of anti-islanding without not only NDZ and but current distortion

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2018년도 학술발표회
• /
• pp.373-373
• /
• 2018

화력발전소, 석유화학공단 등 대규모 배출원에서 발생되는 이산화탄소를 활용하여 온실가스의 배출을 줄이고, 경제적 가치를 창출할 수 있는 탄소자원화는 기후변화 대응을 위한 국가전략프로젝트 중 하나이다. 전 세계적으로 탄소자원화 기술은 아직 상용화 단계이지만 최근 강화된 온실가스 감축 의무로 인하여 탄소자원화 시장은 더욱 확대될 전망이다. 화력발전소의 이산화탄소 발생 과정에서 배출되는 수증기는 응축기술을 통하여 새로운 수원으로 활용이 가능하다. 응축된 물의 최적 활용과 사용처 지향적 효율적 물순환을 위한 시설 내 스마트 워터 그리드(SWG) 개념의 물분배 시스템은 발전 산업 내에 탄소자원화의 핵심기술로 사용될 수 있다. SWG는 시설 내 용수공급 관리에서의 관망 운영, 물 수요 관리 등 ICT를 활용한 종합적인 물 분배 시스템으로, 본 연구에서는 SWG 물순환 시스템의 국내외 기술조사를 통해 발전 산업 시설 내에 적용성을 검토하였다. 물의 재이용 시스템을 포함한 SWG 기술, 지능형 관망 운영 기법 기술, 실시간 수질 감시 체계 기술 연구를 기반으로, ICT 기반 용수공급 정보 관리 기술과 수운영 모니터링 기술을 통하여 SWG가 발전 산업 연계 기술로써 적용될 수 있도록 하였다. 본 연구에서 제시된 SWG 시스템을 적용한 산업 인프라를 통하여 산업적 파급 효과를 높이고, 이를 활용한 인력과 비용 절감이 기대되며, 저에너지, 고효율화를 위한 기술력과 글로벌 물 시장진출 경쟁력을 향상시키기 위한 기초연구자료로써 활용이 가능할 것으로 기대된다.

• 대한조선학회논문집
• /
• 제31권4호
• /
• pp.41-50
• /
• 1994

프로펠러 주위의 비압축성 점성유동을 해석하기 위해 멀티그리드 방법을 이용한 Iterative time marching 방법이 적용되었다. 이 방법은 3차원 비압축성 Navier-Stokes 방정식을 움직이는 비직교 일반 좌표계상에서 풀고 있으며, 시간에 대해서는 1차의 정확도 그리고 공간에 대해서는 2차 또는 3차의 정확도를 가지고 있으며 반복계산의 수렴속도를 가속시키기 위해서 멀티그리드방법을 사용하였다. 또한 본 방법은 Vector나 Parallel컴퓨터에 적용이 매우 간편하다는 장점을 가지고 있다. 본 연구 결과와 실험치 혹은 다른 연구자의 계산 결과와 일반적으로 잘 일치하고 있으며, 멀티그리드 방법은 수렴에 필요한 CPU시간을 단축시키고 해의 정확도도 개선함을 보여주었다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제1권1호
• /
• pp.1-12
• /
• 2009

Wing-in-Ground vehicles and aerodynamically assisted boats take advantage of increased lift and reduced drag of wing sections in the ground proximity. At relatively low speeds or heavy payloads of these craft, a flap at the wing trailing-edge can be applied to boost the aerodynamic lift. The influence of a flap on the two-dimensional NACA 4412 airfoil in viscous ground-effect flow is numerically investigated in this study. The computational method consists of a steady-state, incompressible, finite volume method utilizing the Spalart-Allmaras turbulence model. Grid generation and solution of the Navier-Stokes equations are completed using computer program Fluent. The code is validated against published experimental and numerical results of unbounded flow with a flap, as well as ground-effect motion without a flap. Aerodynamic forces are calculated, and the effects of angle of attack, Reynolds number, ground height, and flap deflection are presented for a split and plain flap. Changes in the flow introduced with the flap addition are also discussed. Overall, the use of a flap on wings with small attack angles is found to be beneficial for small flap deflections up to 5% of the chord, where the contribution of lift augmentation exceeds the drag increase, yielding an augmented lift-to-drag ratio.

• Nuclear Engineering and Technology
• /
• 제49권5호
• /
• pp.905-913
• /
• 2017

Advanced reactor designs often feature longer operating cycles between refueling and new concepts of operation beyond traditional baseload electricity production. Owing to this increased complexity, traditional proportional-integral control may not be sufficient across all potential operating regimes. The prototypical advanced reactor (PAR) design features two independent reactor modules, each connected to a single dedicated steam generator that feeds a common balance of plant for electricity generation and process heat applications. In the current research, the PAR is expected to operate in a load-following manner to produce electricity to meet grid demand over a 24-hour period. Over the operational lifetime of the PAR system, primary and intermediate sodium pumps are expected to degrade in performance. The independent operation of the two reactor modules in the PAR may allow the system to continue operating under degraded pump performance by shifting the power production between reactor modules in order to meet overall load demands. This paper proposes a Takagi-Sugeno (T-S) fuzzy logic-based power distribution system. Two T-S fuzzy power distribution controllers have been designed and tested. Simulation shows that the devised T-S fuzzy controllers provide improved performance over traditional controls during daily load-following operation under different levels of pump degradation.