• 한국전산유체공학회:학술대회논문집
• /
• 2006.10a
• /
• pp.136-141
• /
• 2006

A prediction of store separation trajectory using grid survey method has been conducted. For the grid survey method, store's aerodynamic flowfield data such as freestream and grid data is needed to solve 6 degree of freedom(6-DOF) equations of motion. In the presented study, aerodynamic flowfield data was generated by Euler solver instead of CTS wind tunnel test. The predicted trajectories shows good agreement with CTS test results.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.6
• /
• pp.139-145
• /
• 2010

Recently, close-to-nature stream improvement works have been carried out in urban streams, where eco-friendly bank revetment methods have been adopted. These bank revetment methods are vulnerable to be damaged or washed away by floods compared to the traditional methods which use concrete materials. Damage analysis methods on the urban streams by the floods of severe rain storm are presented. The analysis methods are the graph-using method and the grid method, which are derived from the survey results at Gwangju stream. Damage analysis grid which is intersected velocity grid and material strength grid is the highest correlation with the damage survey grid. The biggest damage on the bank revetments have been occurred around the crossing structures. Big damages have also been occurred in the connection of low water revetment and the terrace land, and around the structures in the terrace land of the stream.

• Journal of Korea Water Resources Association
• /
• v.55 no.11
• /
• pp.979-989
• /
• 2022

In hydrological surveys, observation through representative location is essential due to temporal and spatial limitations and constraints. Regarding the use of hydrological data and the accuracy of the data, there are still insufficient observatories to be used in a specific watershed. In addition, since there is virtually no standard for the location of the current evapotranspiration, this study proposes a method for determining the location of the evapotranspiration. To determining the location of evapotranspiration, a grid is selected in consideration of the operating range of the Flux Tower using the eddy covariance measurement method, which is mainly used to measure evapotranspiration. The grid of representative location was calculated using the factors affecting evapotranspiration and satellite data of evapotranspiration. The grid of representative location was classified as good, fair, and poor. As a result, the number of good grids calculated was 54. It is judged that the classification of the grid has been achieved regarding topography and land use as a characteristic that appeared in the classification of the grid. In particular, in the case of elevation or city area, there was a large deviation, and the calculated good grid was judged to be a group between the two distributions.

• Spatial Information Research
• /
• v.23 no.6
• /
• pp.43-55
• /
• 2015

Currently, each organization has developed its gridded data in the form of respective grid system for its own purpose. Interoperability among the organization had been limited and resulted in inconvenient data access and application across domains. In this study, we investigated potential standards for National grid system and their strength and weakness. We also reviewed existing gridding schemes and had a survey of demand about grid system to those who have used or would plan to use gridded data in academic and business sectors. As the result of survey of demand, we suggested national grid system for national grid data integration management system which has the mutual compatibility and also proposed sharing scheme of the grid type for users who need to grid data.

• Geophysics and Geophysical Exploration
• /
• v.19 no.4
• /
• pp.179-186
• /
• 2016

Data leveling utilizing baseline survey makes existing old data be smoothly compiled, and also keep characteristics of data, such as small high frequency anomaly information. The previously proposed leveling method may easily loose or damage the original characteristics of the data. This paper suggests a new leveling method. New method determines the leveling coefficients using regional field of the original data, which is composed by data on the grids point coincided with baseline survey grid, while existing method uses all grid data without any considerations. Results of new leveling method on test area shows that new method make two data sets compiled more smoothly and trends of data distribution expressed more clearly. And then, it also preserves high frequency information well.

• Journal of IKEEE
• /
• v.21 no.2
• /
• pp.105-114
• /
• 2017

This paper proposes a design method of an LCL-filter for grid-tied three-level inverter systems. The demand for three-phase PWM inverters in applications such as wind or solar power generation systems has been increase in recent years. To reduce harmonic components caused by switching operation, such inverters are connected to the grid via an LCL filter. Although there are research results for designing LCL-filter, the modulation method should be fully considered to make the filter perform desired cancellation ability with minimized size. This paper presents the design methodology for an LCL-filter that is optimized for SVM switching operations. The simulation and experimental results verify the validity of the LCL-filter designed with proposed method in this paper.

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.1
• /
• pp.109-116
• /
• 2012

The effect of the grid resolution on the hydrodynamic simulation has been investigated by using CCHE2D and EFDC. Since a high resolution of the grid results in the increase of computation time, an appropriate grid resolution should be selected by considering the efficiency of simulation according to the objectives of projects. In order to understand the effect of grid resolution and determine the optimal grid resolution, several cases with different lateral grid resolutions have been simulated for the reach of Nakdong river at the confluence of Kumho river for the floods in 2006. Orthogonal curvilinear grids for the domain have been constructed from the survey products at the sections with the longitudinal interval of 20 m. Area-elevation curve and the comparison of simulated results with measured stage at the specific station have been used to check the effect of grid resolution. From the results, the existence of optimal grid resolution has been observed, which ensure both efficiency of computation and certainty of results.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.40 no.5
• /
• pp.954-965
• /
• 2016

This study was designed to help develop an optimized sizing system for the military winter jackets of Korean males. First, we conducted a survey on the supply rate of military winter jackets and the wearing of suitable size jackets in order to identify problems in the current sizing system. We next developed a new sizing system generation method to satisfy the coverage rate and appropriate size number: Hybrid of Grid with Optimization. The findings of this study were: 1. The survey indicated that a 90 (chest girth) size is necessary; in addition, a one-step large size jacket fit well as a right size jacket. 2. We developed three optimized sizing systems for Korean male military winter jackets using the Hybrid of Grid with an optimization method and suggested one of them as a final new sizing system. The new sizing system consisted of two primary dimension: chest girth and stature. It has a 14 size number and its extended coverage rate is larger than the current sizing system and it has a 90 (chest girth) size. It also selected an optimized size for the area of low population density. The new sizing system is therefore considered very effective for Korean male soldiers military winter jackets.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2002.11a
• /
• pp.339-344
• /
• 2002

The Purpose of this study Is to investigate Open Housing design methods on multi-family housing in the Netherlands and Finland. This study is based on the several actual field survey through visiting eight sites in the netherlands and Finland. we found a lot of design items applied to the Holland and Finnish multi-family housing for Open Housing. Open Housing design items are user participation design, layout flexibility, finishes selection, flexible utilities, interior components and use of modular grid.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.1
• /
• pp.41-50
• /
• 2008

Recent progress in state-of-the-art geospatial information technologies such as digital mapping, LiDAR(Light Detection And Ranging), and high-resolution satellite imagery provides various data sources fer Digital Elevation Model(DEM). DEMs are major source to extract elements of the hydrological terrain property that are necessary for efficient watershed management. Especially, watersheds extracted from DEM are important geospatial database to identify physical boundaries that are utilized in water resource management plan including water environmental survey, pollutant investigation, polluted/wasteload/pollution load allocation estimation, and water quality modeling. Most of the previous studies related with watershed extraction using DEM are mainly focused on the hydrological elements analysis and preprocessing without considering grid size of the DEMs. This study aims to analyze accuracy of the watersheds extracted from DEMs with various grid sizes generated by LiDAR data and digital map, and appropriate preprocessing methods.