• 전력전자학회논문지
• /
• 제25권5호
• /
• pp.385-393
• /
• 2020

This study introduces an analysis and control method for the variation of neutral point current in a grid-tied three-level neutral point clamped (NPC) converter under various grid imbalance operating conditions. Various fault cases with unbalanced amplitude and phase are systematically categorized and described using a unified metric called the imbalance factor. The fundamental component of neutral point current is generated under grid imbalance cases. The pattern and behavior of this fundamental component of neutral point current highly depend on the imbalance factor regardless of the particular type of grid fault cases. The control scheme for regulating the negative sequential component of AC input current effectively reduces the size of the fundamental component of neutral point current under a wide range of grid imbalance cases. The control scheme will enable a grid-tied three-level NPC converter to operate reliably and stably under various types of grid faults.

• 한국전산유체공학회지
• /
• 제15권3호
• /
• pp.24-31
• /
• 2010

boiling flow in vertical tube. The multiphase flow model used in this CFD analysis is the two-fluid model in which liquid(water) and gas(vapour) are considered as continuous and dispersed fluids, respectively. A wall boiling model is also used to simulate the subcooled boiling heat transfer at the heated wall boundary. The diameter and heated length of tube are 0.0154 m and 2 m, respectively. The system pressure in tube is 4.5 MPa and the inlet subcooling is 60 K. The near-wall grid size in the non-dimensional wall unit for lqiuid phase ($y^+_{w,l}$) was examined from 101 to 313 at the outlet boundary. The CFD calculations predicted the void distributions as well as the liquid and wall temperatures in tube. The predicted axial variations of the void fraction and the wall temperature are compared with the measured ones. The CFD prediction of the wall temperature is shown to slightly depend on the near-wall grid size but the axial void prediction has somewhat large dependency. The CFD prediction was found to show a better agreement with the measured one for the large near-wall grid, e.g., $y^+_{w,l}$ > 300 at the tube exit.

• 한국구조물진단유지관리공학회 논문집
• /
• 제6권4호
• /
• pp.107-118
• /
• 2002

The purpose of this study is to investigate the strengthening effect of RC beams with carbon fiber grid. Carbon fiber grid that is very lightweight and stronger than steel reinforcement does not rust or corrode and has a very high resistance to salt. In this study, five real size specimens which are strengthened with different types of carbon fiber grid are tested. With the results of this tests, we found the physical and mechanical properties of carbon fiber grid and polymer mortar which are used to strengthen the damaged or cracked reinforcement concrete beams. we also investigate the strengthening effect of carbon fiber grid on the five flexural test specimens that have cracks.

• 한국위성정보통신학회논문지
• /
• 제9권2호
• /
• pp.18-22
• /
• 2014

위성 통신은 지상 무선국과 위성 사이의 통신으로, 지상 무선국을 유기적으로 활용함으로써 효율적인 위성 통신이 가능하다. 무선 통신은 이동성, 지형 및 방해 신호가 중요한 성능 결정 요인이며, 그리드 네트워크의 한 요소이다. 따라서 그리드 네트워크의 지속적인 연구 성과를 차기 위성 통신에 적용할 수 있을 것이다. 군 통신은 무선 시스템을 기반으로 사용하기에, 군 통신에서 많이 사용하고 있는 라우팅 프로토콜, OSFP (Open Short Path First) 를 적용하여 그리드 네트워크의 성능 향상을 위한 시뮬레이션을 실시하였다. 본 논문에서는 BER (Bit Error Rate) 및 라우터 수에 따른 성능 변화와 그에 의한 네트워크의 MSS (Maximum Segment Size)를 연구하였으며, 그 결과를 제시하였다. 연구 결과를 통하여 다양한 BER 및 라우터 수에서 최적의 MSS를 확인할 수 있었다.

• 한국지진공학회논문집
• /
• 제27권6호
• /
• pp.265-273
• /
• 2023

This study proposes a methodology for the regional seismic risk assessment of structural damage to buildings in Korea based on evaluating individual buildings, considering inconsistency between the administrative district border and grid lines to define seismic hazard. The accuracy of seismic hazards was enhanced by subdividing the current 2km-sized grids into ones with a smaller size. Considering the enhancement of the Korean seismic design code in 2005, existing seismic fragility functions for seismically designed buildings are revised by modifying the capacity spectrum according to the changes in seismic design load. A seismic risk index in building damage is defined using the total damaged floor area considering building size differences. The proposed seismic risk index was calculated for buildings in 29 administrative districts in 'A' city in Korea to validate the proposed assessment algorithm and risk index. In the validation procedure, sensitivity analysis was performed on the grid size, quantitative building damage measure, and seismic fragility function update.

• 한국전산유체공학회지
• /
• 제12권4호
• /
• pp.68-73
• /
• 2007

Computational Fluid Dynamics (CFD) approach is now playing an important role in the engineering process in these days. Generating proper grid system in time for the region of interest is prerequisite for the efficient numerical calculation of flow physics using CFD approach. Grid generation is, however, usually considered as a major obstacle for a routine and successful application of numerical approaches in the engineering process. CFD approach based on the unstructured grid system is gaining popularity due to its simplicity and efficiency for generating grid system compared to the structured grid approaches, especially for complex geometries. In this paper an automated triangular surface grid generation using CAD(Computer Aided Design) surface data is proposed. According to the present method, the CAD surface data imported in the STL(Stereo-lithography) format is processed to identify feature edges defining the topology and geometry of the surface shape first. When the feature edges are identified, node points along the edges are distributed. The initial fronts which connect those feature edge nodes are constructed and then they are advanced along the CAD surface data inward until the surface is fully covered by triangular surface grid cells using Advancing Front Method. It is found that this approach can be implemented in an automated way successfully saving man-hours and reducing human-errors in generating triangular surface grid system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전력기술부문
• /
• pp.137-139
• /
• 2003

Micro-Sources arc emerging as a providing environmentally friendly and reliable and effective solution. Micro-Source converter DC voltage of prime mover to AC voltage using voltage source inverter for interjecting with AC grid system. This paper studies optimal series inductance size for interjecting with AC grid system.

• 한국의류학회지
• /
• 제40권5호
• /
• pp.954-965
• /
• 2016

This study was designed to help develop an optimized sizing system for the military winter jackets of Korean males. First, we conducted a survey on the supply rate of military winter jackets and the wearing of suitable size jackets in order to identify problems in the current sizing system. We next developed a new sizing system generation method to satisfy the coverage rate and appropriate size number: Hybrid of Grid with Optimization. The findings of this study were: 1. The survey indicated that a 90 (chest girth) size is necessary; in addition, a one-step large size jacket fit well as a right size jacket. 2. We developed three optimized sizing systems for Korean male military winter jackets using the Hybrid of Grid with an optimization method and suggested one of them as a final new sizing system. The new sizing system consisted of two primary dimension: chest girth and stature. It has a 14 size number and its extended coverage rate is larger than the current sizing system and it has a 90 (chest girth) size. It also selected an optimized size for the area of low population density. The new sizing system is therefore considered very effective for Korean male soldiers military winter jackets.

• Wind and Structures
• /
• 제24권3호
• /
• pp.223-247
• /
• 2017

By using numerical simulation, vast and detailed information and observation of the physics of flow over a train model can be obtained. However, the accuracy of the numerical results is questionable as it is affected by grid convergence error. This paper describes a systematic method of computational grid refinement for the Unsteady Reynolds Navier-Stokes (URANS) of flow around a generic model of trains using the OpenFOAM software. The sensitivity of the computed flow field on different mesh resolutions is investigated in this paper. This involves solutions on three different grid refinements, namely fine, medium, and coarse grids to investigate the effect of grid dependency. The level of grid independence is evaluated using a form of Richardson extrapolation and Grid Convergence Index (GCI). This is done by comparing the GCI results of various parameters between different levels of mesh resolutions. In this study, monotonic convergence criteria were achieved, indicating that the grid convergence error was progressively reduced. The fine grid resolution's GCI value was less than 1%. The results from a simulation of the finest grid resolution, which includes pressure coefficient, drag coefficient and flow visualization, are presented and compared to previous available data.

• 한국환경과학회지
• /
• 제16권4호
• /
• pp.523-532
• /
• 2007

본 연구에서는 DEM격자 크기와 하천생성 임계면적크기에 따른 수문 지형특성인자의 변화특성과 이들 자료를 이용한 유출변화특성 분석함으로서 수치지형도를 이용한 강우-유출해석시에 수문기상학적 특성인자 추출에 소요되는 시간적 경제적 노력을 최소화 할 수 있는 적정 임계면적을 제안하는데 목적을 두었다. 1) 격자크기에 따른 유역형상을 검토한 결과 격자크기가 작을수록 해상도가 뚜렷하며, 정확도에서도 우수하게 나타났으며, 격자크기별 최소임계면적별 하천차수를 분석한 결과 격자크기가 하천차수에 영향을 미치지는 않으며, 하천의 갯수도 1차하천에서는 큰 차이가 있으나 2차하천이상의 개수는 큰 차이가 없는 것으로 분석되었고, 하천차수법칙을 설명하는 $R_A,\;R_B,\;R_L$의 검토결과 격자크기가 클수록 미소한 차이로 크게 나타났으며, 임계면적 $0.15km^2$를 기준으로 큰 변화를 나타내고 있었다. 2) GIUH모형의 모델매개변수인 N, K의 검토결과 격자크기의 영향은 없으나, 임계면적이 클수록 작은 값을 나타내고 있음을 알 수 있었다. 3) 분석결과로 볼 때 수치지형도를 이용한 유출해석 모형에서 사용되는 수문지형학적 매개변수 추출에 있어서 격자의 크기는 $R_B,\;R_L$에서는 격자크기 $10m{\times}10m,\;R_A$, N, K에서는 $30m{\times}30m$ 격자크기가 적합하며 하천생성을 위한 임계면적은 $0.15km^2{\sim}0.20km^2$가 적합한 것으로 판단된다. 그러나 본 연구는 1/25,000 수치지형도를 이용한 결과이므로 계속되는 연구에서는 1/5,000 및 1/50,000 지형도를 대상으로 추가로 분석함으로서 강우-유출해석시 적정 임계면적과 격자크기를 제안할 수 있을 것으로 판단된다.측할 수 있어 사용자 분류를 활용한 사용자인터페이스(UI)디자인의 가능성을 확대시킬 수 있을 것이다. 스크린의 사용에 있어서 사용자의 시각적 한계성을 극복하기 위한 새로운 GUI의 시도와 제안은 향후 모바일 기기 디자인의 새로운 방향성을 제시하고 있다.각되며 이를 위해서는 호스피스 관련 기관뿐만 아니라 국가적 차원의 아동 호스피스에 대한 관심과 지원이 요구된다고 생각한다. 양상과 일치하였고 표준조건(water flux 1 cm/일)에서 예측된 이동소요시간에 따라 metolcarb는 most mobile, molinate와 fenobucarb, isazofos는 mobile내지 most mobile, dimepiperate는 moderately mobile이나 mobile, diazinon은 mobile, fenitrothion과 parathion은 slightly mobile 또는 mobile, chloipyrifos-methyl은 immobile이나 slightly mobile 등급에 속하는 것으로 나타났다.히 요구되고 있는 현실이다.브로 출시에 따른 마케팅 및 고객관리와 관련된 시사점을 논의한다.는 교합면에서 2, 3, 4군이 1군에 비해 변연적합도가 높았으며 (p < 0.05), 인접면과 치은면에서는 군간 유의차를 보이지 않았다 이번 연구를 통하여 복합레진을 간헐적 광중합시킴으로써 변연적합도가 향상될 수 있음을 알 수 있었다.시장에 비해 주가가 비교적 안정적인 수준을 유지해 왔다고 볼 수 있다.36.4%)와 외식을 선호(29.1%)${\lrcorner}$ 하기 때문에 패스트푸드를 이용하게 된 것으로 응답 하였으며, 남 여 대학생간에는 유의한 차이(p<0.05)가 인정되었다. 응답자의 체형은 ${\ulcorner}$적당하다${\lrcorner}$고 응답한 경우가 가장 많이