• Journal of Biosystems Engineering
• /
• 제31권5호
• /
• pp.430-435
• /
• 2006

Greenhouse horticulture in South Korea covered about 52,000 ha in 2005. Greenhouse area of about 12,000 ha has been heated during winter season with heating cost of $20{\sim}40%$ of total Production cost. Farmers engaged in greenhouse horticulture were changed into aged people. Therefore the laborsaving of working process and the saving of greenhouse heating cost should be accomplished simultaneously to increase income of greenhouse horticulture. The best method for saving of greenhouse heating cost is to install thermal tunnels into greenhouse. Then hot air heaters using fossil fuel should be changed into hot water heaters. In other words air heating using forced convection should be changed into natural convection system. In this research coil tube made of flexible PE pipe was designed as hot water heat exchanger and its heat exchanging characteristics were analyzed. This new heat exchanger has been adopted as a natural convection system for hot water heating of greenhouse horticulture.

• 농업과학연구
• /
• 제41권4호
• /
• pp.455-460
• /
• 2014

In this study, structural behavior of plastic greenhouse foundation was investigated using rational finite element modeling for structures which have different material properties each other. Because the concrete foundation of plastic greenhouse and soil which surround and support the concrete foundation have very different material property, the boundary between two structures were modeled by a interface element. The interface element was able to represent sliding, separation, uplift and re-bonding of the boundary between concrete foundation and soil. The results of static and dynamic analysis showed that horizontal and vertical displacement of concrete foundation displayed a decreasing tendency with increasing depth of foundation. The second frequency from modal analysis of structure including foundation and soil was estimate to closely related with wind load.

• 농업과학연구
• /
• 제40권4호
• /
• pp.317-323
• /
• 2013

This research was conducted to obtain the basic information for establishment of standard guidelines in the design and installation of roof ventilation system in single-span plastic greenhouse. To achieve this, the greenhouse structure & characteristics, cultivation status, and ventilation system were investigated for single-span greenhouse with roof ventilation system cultivating the Cucurbitaceae vegetables, watermelon, cucumber, and oriental melon. Most of single-span watermelon greenhouse in Haman and Buyeo area were a hoop-style and the ventilation system in those greenhouses mostly consisted of two different types of 'roof vent (circular or chimney type) + side vent (hole) + fan' and 'roof vent (circular type) + side vent (hole or roll-up type)'. The diameter of circular and chimney-type vent was mostly 60cm and the average number of vents was 10.5 per a bay with vent spacing of average 6.75m. The ratio of roof vent area to floor area and side vent area in the single-span watermelon greenhouse with ventilation fan were 0.46% and 7.6%, respectively. The single-span cucumber greenhouse in Haman and Changnyeong area were a gable roof type, such as even span, half span, three quarter and the 70.6% of total investigated single-span greenhouses was equipped with a roof ventilation fan while 58.8% had a circulation fan inside the greenhouse. The ratios of roof vent area to floor area in the single-span cucumber greenhouse ranged from 0.61 to 0.96% and in the case of the square roof vent, were higher than that of the circular type vent. On average, the roof ventilation fan in single-span cucumber greenhouse was equipped with the power input of 210W and maximum air volume of $85.0m^3/min$, and the number of fans was 9.75 per a bay. The number of roof vent of single-span oriental melon greenhouse with only roll-up type side vent ranged from 8 to 21 (average 14.8), which was higher than that of other Cucurbitaceae vegetables while the vent number of the greenhouse with a roof ventilation fan was average 7 per a bay.

• 생물환경조절학회지
• /
• 제21권1호
• /
• pp.74-78
• /
• 2012

본 연구는 전북 부안에서 재배되고 있는 뽕나무를 대상으로 온실 재배를 통하여 조기 수확 및 안정적 수확량 확보가 가능한지를 알아보고자 신초 생육 특성과 이에 관계하는 기상 요인을 분석하였다. 발아 및 착색 시기는 온실의 뽕나무에서 노지에 비해 18~19일 정도 빨랐고, 발아시에서 착색시까지의 일수는 39일로 차이를 나타내지 않았다. 발아 후 39일 동안 온실에서 뽕나무의 신초 길이, 신초당 착과수는 노지와 차이를 나타내지 않았지만, 마디수는 적었다. 생육 기간 동안 온실 내부의 주별 광량은 노지에 비해 0.3~0.8배 범위 수준이었고, 총 누적량은 절반수준으로 아주 적었다. 그러나 온실에서 주별 누적온도는 노지와 거의 차이를 나타내지 않고 후반기로 가며 다소 상승하는 경향이었으며, 총 누적량도 노지에 1.1배로 거의 유사한 수준이었다. 생육 기간 동안 상대습도는 온실에서 53~94.5%로 노지에 비해 대부분 높은 수준을 유지하였다. 따라서 뽕나무는 광의 영향을 적게 받고 안정적인 수량을 조기에 확보할 수 있어 온실 재배 작목으로 적합하다.

• 농업과학연구
• /
• 제41권4호
• /
• pp.461-472
• /
• 2014

This study was conducted to build the CFD simulation model which can quantify the distribution of the meteorological factors in air-heated greenhouse for chrysanthemum according to the location and capacity of air-circulation fan. The CFD model was also verified by experiment. It was judged that SST model was the most appropriate turbulence model which can properly describe the airflow by the air-circulation fan. According to the simulation results, the differences between the measured and predicted temperatures from 18 points at each height in the greenhouse were $0.2{\sim}0.4^{\circ}C$ in average. This showed a good agreement between the predicted data and the measured ones. The developed CFD model can be a useful tool to evaluate and design the air-circulation systems in the greenhouse with various configurations.

• 농촌계획
• /
• 제23권4호
• /
• pp.27-38
• /
• 2017

Humans are provided with a wide range of public benefits from ecosystems and agricultural ecosystems. But the establishment of the horticulture complex is a space that hampers the public ecosystem. Therefore, we have evaluated the creating landscape function of the horticulture complex and found improvement. A total of 20 landscape slides were used for the study. Korea-paddy field, Korea-vinyl greenhouse, Korea-glass greenhouse, Japan-vinyl greenhouse and Netherlands-glass greenhouse were selected as 4 slides. The evaluation used the AHP method and 10 adjectives Likert which compares 20 landscape slides. Four Korea-paddy fields were rated highly positive images. All 10 adjectives can be selected as representative images of production scenes. In most adjectives, four scenes of KVG1, KVG2, KVG3 and KVG4, which are the Korea-greenhouse scenes, were evaluated as negative images. Netherlands and Korea-glass greenhouse scenes and Japan-vinyl greenhouse scenes were generally positive images. In conclusion, it is confirmed that glass greenhouse scenery is higher than vinyl greenhouse scenery. And Japan and Netherlands scenery are higher and better than Korea. Therefore, JVG1 in Japan and NGG3 in the Netherlands were proposed to be set as landscape improvement targets.

• 한국식품과학회지
• /
• 제32권2호
• /
• pp.439-443
• /
• 2000

시설원예산물 중 DON 생성능이 있는 균주의 오염 여부를 조사하기 위해 진주를 비롯한 서부 경남 일원과 경북 안동 근교에서 총 192점의 시료를 분리하여 균 분리를 실시한 결과 Fusarium속 103균주를 분리하였다. 분리된 균을 YES배지로 $28^{\circ}C$, 15일 배양한 후 ethyl acetate로 추출하여 thin layer chromatography(TLC)법으로 확인한 결과 DON 생성 균주 8개가 확인되었다. Enzyme amplification system immunoassay법을 이용하여 DON 생성 균주 8개를 정량한 결과 검출범위는 $0.007-1.21\;{\mu}g/mL$ 이었다. 이 중 남해 토양에서 분리한 32-D-3 균주가 $1.21\;{\mu}g/mL$로 가장 높았다.

• 한국생물환경조절학회:학술대회논문집
• /
• 한국생물환경조절학회 2007년도 춘계 학술대회 및 정기총회
• /
• pp.178-181
• /
• 2007

• 생물환경조절학회지
• /
• 제21권4호
• /
• pp.428-436
• /
• 2012

본 연구에서는 토마토 재배에 적합한 규격을 가지면서 기상재해에 안전한 토마토 재배용 연동 비닐하우스를 설계하였다. 토마토 하우스의 규격은 폭 7m, 측고 4.5m, 동고 6.5m이다. 1995년에 농촌진흥청에서 개발한 1-2W형 하우스와 비교해서 폭은 같지만 측고는 1.8m, 동고는 2m 더 높다. 중방은 작물하중과 장치하중을 견딜 수 있도록 트러스 구조로 설계하였다. 토마토 하우스는 높으면서도 내재해 설계 기준(MIFFAF, 2010)에 맞게 만들어졌다. 즉, 최고 설계 기준인 풍속 $40m{\cdot}s^{-1}$, 적설 40cm 이상에 안전하도록 구조안전성 분석을 통해 하우스 기둥, 서까래 등의 부재 규격과 설치 간격을 설정하였다. 1-2W형 하우스와 달리 토마토 하우스에는 랙-피니언 타입의 천창을 용마루 부분에 설치하여 외부 공기 유입과 자연 환기를 극대화할 수 있도록 하였다. 하우스 높이가 증가하면 난방비는 증가하므로 토마토 하우스에는 보온력이 우수한 다겹 보온커튼을 설치하여 하우스 바깥으로 빠져나가는 열을 최소화하였다.

• 한국생물환경조절학회:학술대회논문집
• /
• 한국생물환경조절학회 2005년도 세계의 친환경 시설원에 기술동향 및 춘계 국제학술대회 발표논문집
• /
• pp.83-88
• /
• 2005