• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.153-161
• /
• 2016

Urban design claiming the notion of 'Sustainability', which inevitably includes ecological complexity, is normally geared towards the reflection of environmentally-friendly technical guidelines in the existing planning process. Although physical planning should be combined with economic, social, cultural, environmental issues, and policies, it is conducted conventionally as the sum of the closed sectoral approaches of planning. To overcome this limit, Design Charrette was invented for sustainable urban design or community design, which should consider the complexity of diverse issues. This design process unveils complicated and divergent problems and a variety of stakeholders participate in the integrated design simultaneously and cooperatively. Because Design Charrette must also be a process of agreement, it is used for sustainable community design. The aim of this study was to introduce Design Charrette as an alternative of Korean sustainable urban design, which is regarded as 'making guidelines related to green principles'. For such a purposes, the definition and differentiation of Design Charrette will be explained with an analysis of the introduction background, benefit and procedure. The contents, system and process of Design Charrette will be analyzed through case studies in Canada, where this method of design is widespread. In the last part, the implementation system (the comprehensive system of organization / content and direction of planning / process and output) will be deduced after concentrated analysis of one respected case, 'Sensitive Urban Infill Charrette' of the City of Surrey. This implementation system will be a crucial reference to develop Korean Design Charrette.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.1
• /
• pp.58-70
• /
• 2020

Detour behavior on the expressway means that the driver uses the local road by passing the part of the expressway which is stagnant at the time of the traffic demand such as holidays. Since the detour rate was estimated through the survey at toll gate in the past, there was a difficulty in estimating the actual detour rate due to the small sample of the survey. In this study, we use DSRC-based route travel data to conduct empirical studies on detour patterns such as the estimation of actual detour rate, the improvement of travel time using detour road, and the correlation between traffic conditions on the expressway and detour rate. On the day of Chuseok and the day before Chuseok, the analysis of Giheung-DongtanIC→OsanIC and Seopyeongtaek IC→Walgott JC showed that the use of detour roads increased gradually during the congestion of the main line and travel time reduced when using detour roads, However, when the traffic congestion of the main line is not severe, the travel time increases when using the detour roads. The correlation between the traffic condition of the expressway and the actual detour rate has a negative correlation, which is consistent with the congestion pattern of the main line. The results of this study can be used to overcome limitations of detour pattern research based on surveys in the past and to establish a detour strategy for expressway sections where traffic demand is concentrated.

• Journal of Navigation and Port Research
• /
• v.38 no.2
• /
• pp.105-110
• /
• 2014

Korean government sets up a goal that jumps up to the third ranked powerful nation of offshore wind in the world until 2020 and announced "The plan for 2.5-gigawatt wind farm off the south-west coast by 2019". Such above, according to green energy policy, offshore wind farms(OWF) will be increased continuously. The development of OWF should be taken account of wind volume as well as marine traffic environment. Specially aids to navigation of OWF play a significant role in preventing collision between vessels navigating near waters and structures. For purpose of distinguishing OWF, IALA recommendations define installation of lights on SPS and IPS. However, there is no mention of light character that plays important role in identification of lights as marking offshore wind farm. Also the research on selection of proper light character has been insufficient state. Therefore in this paper, we analyzed internal and external regulations concerned marking with light on SPS and IPS in OWF. And suggested patterns and rhythms of light having not only easily recognized feature but also no confusion with other light of aids to navigation. The proposed light characters were verified by simulation, and the results were analysed that synchronism flickering of "Fl Y(4) 12s(SPS)" and "Fl Y 6s(IPS)" would be useful in combination of both lights.

• Journal of Energy Engineering
• /
• v.24 no.2
• /
• pp.129-143
• /
• 2015

Increasing concerns on climate change and energy security accelerated policies to reduce green-house gas emission, especially from the transportation sector. Electric vehicle (EV) has been on the spotlight to deal with such environmental issue and V2G (Vehicle-to-Grid) technology began to draw attentions as an alternative to reduce ownership costs while contributing to an efficient and decentralized power grid. This study conducts a scenario analysis on total cost of ownership of EV under V2G scheme and compare with non-V2G EV and Internal Combustion Engine (ICE) vehicle. As result, V2G service is expected to provide an annual average profit of $210 to EV users willing to reverse flow its residual power in the battery. The profit from V2G service leaves a margin of $4,530 over operational lifetime, compared with $2,420 cost of charge for non-V2G EV. In summary, total cost of ownership of V2G-capable EV was 6.2% less than non-V2G EV and 10.2% higher than ICE vehicle. The results confirm a comparative economic advantage of operating EV under V2G scheme. Increased number of EVs with V2G service has shown to provide positive effects to power industry for valley filling in load distribution, thus, favorably increasing the overall economic feasibility.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.3
• /
• pp.77-84
• /
• 2015

The key objective of this research is to review the effectiveness of spatial regression to identify the influencing factors of spatial distribution patterns of floating population. To this end, global and local spatial autocorrelation test were performed using seoul floating population survey(2014) data. The result of Moran's I and Getis-Ord $Gi^*$ as used in the analysis derived spatial heterogeneity and spatial similarities of floating population patterns in a statistically significant range. Accordingly, Geographically Weighted Regression was applied to identify the relationship between land use attributes and population floating. Urbanization area, green tract of land of micro land cover data were aggregated in to $400m{\times}400m$ grid boundary of Seoul. Additionally public transportation variables such as intersection density transit accessibility, road density and pedestrian passage density were adopted as transit environmental factors. As a result, the GWR model derived more improved results than Ordinary Least Square(OLS) regression model. Furthermore, the spatial variation of applied local effect of independent variables for the floating population distributions.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.4
• /
• pp.153-163
• /
• 2017

This research is based on the previous research that personally preferred safe distance, rotating angle and speed are differentiated. Thus, we use machine learning model for recognizing maneuvering modes trained per personal or per similar driving pattern groups, and we evaluate automatic driving according to maneuvering modes. By utilizing driving knowledge, we subdivided 8 kinds of longitudinal modes and 4 kinds of lateral modes, and by combining the longitudinal and lateral modes, we build 21 kinds of maneuvering modes. we train the labeled data set per time stamp through RNN, LSTM and Bi-LSTM models by the trips of drivers, which are supervised deep learning models, and evaluate the maneuvering modes of automatic driving for the test data set. The evaluation dataset is aggregated of living trips of 3,000 populations by VTTI in USA for 3 years and we use 1500 trips of 22 people and training, validation and test dataset ratio is 80%, 10% and 10%, respectively. For recognizing longitudinal 8 kinds of maneuvering modes, RNN achieves better accuracy compared to LSTM, Bi-LSTM. However, Bi-LSTM improves the accuracy in recognizing 21 kinds of longitudinal and lateral maneuvering modes in comparison with RNN and LSTM as 1.54% and 0.47%, respectively.

• Journal of the Economic Geographical Society of Korea
• /
• v.6 no.2
• /
• pp.443-470
• /
• 2003

This study is to consider economic, political, socio-cultural and environmental characteristics of the new urbanization process and its spatial structures and urban policy of Seoul in the 1990s. Some experimental findings which have been identified throughout this study can be summarized as follows. First of all, Seoul, the largest city in S.Korea has experienced a restructuring process of economy, which has been promoted by the development of producer services as well as knowledge- based or high tech industries. Secondly, the autonomy of Seoul has increased after the introduction of local self-government, with relatively higher self-management of local finance than other cities, strengthening the tendency of enterpreneurialism, empowering civil movements, and increasing the political participation of women. Thirdly, in the socio-cultural aspect, the material wants to gain a certain identity through consumption, using urban environments culturally, varying consuming attitudes and ways of leisure times in relation with the rapid development of transportation and information communication. Fourthly, in the environmental aspect, Seoul has tried to introduce the concept of sustainable development in terms of increasing wants on the quality of life, and to develop a pro-environmental eco-city with environmental rehabilitation, constructing green space and eco-park. Finally, in the spatial dimension, Seoul has shown a structuration of multi-centers, with highly spectacular urban landscapes and seemingly authentic urban planning. These results make us confirm that Seoul has been in the process of new urbanization which can be distinguished from the previous one.

• Journal of Environmental Health Sciences
• /
• v.19 no.4
• /
• pp.51-58
• /
• 1993

The integrated solid waste management for Seoul Metropolitan city can be established on the basis of the following hierarchy of priorities: 1. Efforts for source reduction should be propelled by both government and citizens to achieve the effects of resource conservation. The adequate production and consumption which are environmentally amenable and sustainable can be induced by the reasonable imposition of deposit money for waste treatment to one-time use products. To accomplish source reduction effectively, the induction of legal and institutional regulation of producer and consumer participation is requisite. 2. For resource recovery, wastes generated should be recycled as far as practicable. Community residents are responsible to separate discharge, the authorities concerned have responsibility of separate collection, and recycling industry should be assissted through tax reduction and financing. Resource separation facilities can be constructed at Kimpo Metropolitan landfill site for wastes not separately collected due to some unavoidable circumstances. 3. Garbage should be composted. Garbage is uneconomical for incineration, because it has high moisture content and low calorie, thus there is no reason for the incineration of garbage even though garbage is classified into combustibles. Composting facilities can be located at sites which are not densely populated and easily accessible to transportation, for example, Kimpo Metropolitan landfill site. Compost produced can be managed by the authorities for the use of fertilizer to a green tract of suburban land and farms. 4. Nonhazardous combustible wastes not recyclable can be utilized for thermal recovery at the incinerators which are completely equipped with pollution control devices. According to the trend of local autonomy and the equity principle of local autonomous entities, incineration facilities of minimal capacity required can be constructed at each districts of Seoul Metropolitan city which have organized local assembly. In case of Yangcheon district, the economically combustible waste quantity is about 260 tons/day which exceeds 150 tons/day, the incineration capacity of existing facility. But, from now on, waste quantity can be reduced substantially by the intensive efforts of citizens for source reduction and recycling and the institutional support of administrative organizations. Especially, it is indispensable for the government to constitute institutional and technological bases that can recycle paper and plastics form 43% of waste generated. A good time for constructing of incineration facilities for municipal solid waste can be postponed to the time that pollution control technologies of domestic enterprises are fully developed to satisfy the standards of air pollution prevention, because the life expectancy of Kimpo Metropolitan landfill site is about 25 years. Within this period, institutional improvements and technological advancements can be attained, while the air qual. ity of Seoul Metropolitan city can be ameliorated to the level to afford incineration facilities. 5. For final disposal, incombustibles and ash are landfilled sanitarily at Kimpo Metropolitan landfill site.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.9
• /
• pp.604-612
• /
• 2012

Self-management plan for GHG (Greenhouse Gas) reduction should be prepared in academic facilities, which occupy a large amount of energy consumption. In this study, a university was chosen as one of the major academic facilities and its energy consuming pattern and GHG emission were analyzed. The results have shown that annual $CO_2$ emission from university buildings was 10,452 ton-$CO_2$ (0.65 ton-$CO_2/m^2$), and dependent upon 78.0% electricity, 20.5% LNG and 1.5% oil, respectively as energy sources. According to more detail analysis by usage of energy consumption, appliances occupies 36.7% followed by gas heating (18.9%), lighting (18.6%), heating with electricity (12.5%), cooling with electricity (10.2%), transportation (1.5%), gas cooling (1.2%) and cooking (0.4%). Furthermore, annual $CO_2$ emissions per unit area and a student by electricity usage were evaluated to 51.30 kg-$CO_2/m^2$ and 981.86 kg-$CO_2$/capita, respectively and those by LNG usage were 14.61 kg-$CO_2/m^2$ and 241.01 kg-$CO_2$/capita.

• Journal of the Korean Institute of Gas
• /
• v.22 no.6
• /
• pp.123-128
• /
• 2018

MDF was treated on the surface of MDF with fire retardant lacquer, water-soluble flame retardant coat and water-soluble wood cover on the MDF wood, and the pyrolysis characteristics and the atmospheric noxious gas generation characteristics were investigated by using the large capacity thermal analyzer. As a result of investigating pyrolysis and combustion gas generation characteristics after treatment of 0.11 / 11.55 g in terms of mass ratio, it was found that combustion starting time was slightly longer than that of pure MDF in the case of treatment with fire retardant lacquer. The combustion temperature was increased from $340^{\circ}C$ to $450^{\circ}C$. The pyrolysis and combustion gas generation characteristics of the MDF wood treated with the aqueous flame retardant coat showed the changes in combustion starting time and temperature from $260^{\circ}C$ to $542^{\circ}C$ for about 26 minutes at the mass ratio of 0.13 / 11g. Also, when the commercially available waterproof wood cover was treated with 0.13 / 11.55 g of MDF, the sudden weight change tended to increase from $300^{\circ}C$ to $370^{\circ}C$ and showed a second change at approximately $500^{\circ}C$.