• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.33 no.4
• /
• pp.231-238
• /
• 2007

In the previous study, the anti-oxidant activity of extract/fraction of Sueada asparagoides (SA) was investigated and the results showed that the ethylacetate (EtOAc) fraction and its aglycone fraction had the best performance on the free radical scavenging activity, reactive oxygen species scavenging (ROS) activity and cell protective activity (J. Soc. Cosme. Scientists Korea, 33(3), 145 (2007)). In this study, the stability of cream containing 0.3% SA EtOAc extract (called extract below) was evaluated. pH, viscosity and absorbance (363 nm) were measured under the 4 different temperatures ($0^{\circ}C,\;25{\circ}C,\;37{\circ}C\;and\;45{\circ}C$) and under the sun light at the 4 week intervals during the 12 weeks in total. The control cream without containing the extract did not show pH change under the different temperatures mentioned above. However, the pH of the cream the extract was decreased 0.08 at the temperature ranges of $0^{\circ}C\;to\;37^{\circ}C$. Under the $45^{\circ}C$ and sun light condition, the pH was decreased 0.51 and 0.66, respectively. The cream containing the extract did not show absorbance change at the temperature ranges of 0 to $37^{\circ}C$ for 12 weeks. Instead, the absorbance of the cream treated under $45^{\circ}C$ and sun light condition was decreased 7.6 % and 7.4 %, respectively. This decrease in absorbance is relatively small compared to the 48.3 % decrease of the extract sampled from the cream using ethanol solution. This indicates that the extract is stabilized in the cream. After treating the cream for 12 weeks under the different temperatures, the viscosity was measured for the cream containing the extract and control cream. The values were increased by 1,748 cPs in average compared to the initial value for the former and by 951 cPs in average for the latter. On the other hand, the viscosity of control cream treated under the sun light for 12 weeks was significantly decreased (4,022 cPs) relative to the cream containing the extract, which showed 2,484 cPs increase in viscosity. This indicates that the SA extract contributes to the stability of the emulsion product by protective effect to maintain the viscosity of the cream against sun light. In addition, any change in color or smell was not observed through 12 weeks of the experimental time period. Thus, it is concluded that it is still not clear in the stability of the cream containing the extract when it is stored for the long time. Accordingly, it is suggested that further study is needed to provide more information to the manufactures, who are seeking for the application of the extract to improve the anti-oxidant activity and stability of cosmetic products.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.4
• /
• pp.458-465
• /
• 2010

To investigate the growth and nutrient uptake response of sorghum${\times}$sudangrass ($S{\times}S$) hybrid to different rate of livestock manure compost, a field experiment was conducted in the experimental grassland of Chonnam National University. Six treatments were laid out in a randomized block design with triplicates; control (no input), synthetic fertilizer (20 g N $m^{-2}$ and 20 g $P_2O_5\;m^{-2}$), compost 1 (3.4 g N $m^{-2}$ and 3.6 g $P_2O_5\;m^{-2}$), compost 2 (6.8 g N $m^{-2}$ and 7.2 g $P_2O_5\;m^{-2}$), compost 4 (13.4 g N $m^{-2}$ and 14.4 g $P_2O_5\;m^{-2}$), and compost 6 (20.2 g N $m^{-2}$ and 21.6 g $P_2O_5\;m^{-2}$). Ninety days after treatment, above-ground parts of the plants were harvested and measured for dry matter yield (DMY) and amounts of nutrients (N and P) uptake. Synthetic fertilizer application achieved the greatest DMY (2.4 kg $m^{-2}$) and nutrient uptake (38.3 g N $m^{-2}$ and 15.3 g $P_2O_5\;m^{-2}$). Increasing compost application rate tended to enhance DMY accumulation and nutrient uptake (P<0.01), but DMYs of compost 4 (1.9 kg $m^{-2}$) and 6 (1.8 kg $m^{-2}$) treatments were not different. Therefore, it was suggested that application compost alone may not achieve DMY of $S{\times}S$ hybrid compatible to synthetic fertilizer application. As nutrient uptake efficiency data showed that availability of compost P could be better than SF, it might be a strategy to apply compost as P source with supplementary N application such as liquid manure, SF or green manure if necessary considering availability of N input and the yield goals.

• Korean journal of applied entomology
• /
• v.43 no.4 s.137
• /
• pp.297-304
• /
• 2004

The development of Aphidoletes aphidimyza, an aphidophagous gall midge, was studied at various constant temperatures ranging from 15 to $35^{\circ}C$, with $65{\pm}5\%$ RH, and a photo-period of 16L:8D. When A. aphidimyra was fed either on Aphis gossypii or Myzus persicae, it took 43.9 and 44.5 days, respectively, to develop from egg to pupa at $15^{\circ}C$, whereas at $25^{\circ}C$, 14.3 and 15.8 days. The developmental zero was 10.7 and $10.0^{\circ}C$, respectively, while the effective accumuative temperatures were 210.8 and 245.5 day-degrees. The nonlinear shape of temperature-dependent development, shown by A. aphidimyza when fed on either species of the aphids, was well described by the modified Sharpe and DeMichele model. When distribution model of completion time of development for each growth stage was expressed as physiological age and fitted to the Weibull fuction, the completion time of development gradually shortened from egg to larva, and to pupa. In addition, the coefficient of determination $r^2$ ranged between 0.86-0.93 and 0.85-0.94, respectively providing a good approximation of cumulative developmental rates. The life span of adult was 8.7 and 9.2 days at $15^{\circ}C$, and 3.1 and 2.7 days at $30^{\circ}C$, respectively. Egg incubation period was relatively short at $35^{\circ}C$ but hatchability was less than $50\%$ and the mortality of the larva at $35^{\circ}C$ reached $100\%$. At $30^{\circ}C$, the time of development lengthened and the adult longevity was short suggesting ill effect of high temperatures. Even though the life span of adults at $15^{\circ}C$ was relatively long, none moved freely in the rearing cage and no oviposition occurred. Accordingly, in case A. aphidimyza is adopted to suppress phytophagus aphid populations, it could be applicable to cropping systems with ambient temperatures above $20^{\circ}C$ and below $30^{\circ}C$. Within this range, A. aphidimyza adults was observed to be active and oviposit fully.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.5 no.1
• /
• pp.21-30
• /
• 1985

The tension leg platform (TLP) is a kind of compliant structures, and is also a type of moored stable platform with a buoyancy exceeding the weight because of having tensioned vertical anchor cables. In this paper, among the various kinds of tension leg structures, Deep Oil Technology (DOT) TLP was analyzed because it has large-displacement portions of the immersed surface such as vertical corner pontoons and small-diameter elongated members such as cross-bracing. It also has results of hydraulic model tests, comparable with theorectical analysis. Because of the vertical axes of symmetry in the three vertical buoyant legs and because there are no larger horizontal buoyant members between these three vertical members, it was decided to develop a numerical algorithm which would predict the dynamic response of the DOT TLP using the previously developed numerical algorithm Floating Vessel Response Simulation (FVRS) for vertically axisymmetric bodies of revolution. In addition, a linearized hydroelastic Morison equation subroutine would be developed to account for the hydrodynamic pressure forces on the small member cross bracing. Interaction between the large buoyant members or small member cross bracings is considered to be negligible and is not included in the analysis. The dynamic response of the DOT TLP in the surge mode is compared with the results of the TLP algorithm for various combinations of diffraction and Morison forces and moments. The results which include the Morison equation are better than the results for diffraction only. This is because the vertically axisymmetric buoyant members are only marginally large enough to consider diffractions effects. The prototype TLP results are expected to be more inertially dominated.

• Journal of Bio-Environment Control
• /
• v.23 no.2
• /
• pp.158-166
• /
• 2014

This experiment has investigated suitable methods to improve precision water content monitoring of coconut coir substrates to control irrigation by frequency domain reflectometry(FDR) sensors. Specifically, water content changes and variations were observed at different sensing distances and positions from the irrigation dripper location, and different spaces between the FDR sensors with or without noise filters. Commercial coconut coir substrates containing different ratios of dust and chips(10:0, 7:3, 5:5, 3:7) were used. On the upper side and the side of the substrates, a FDR sensor was used at 5, 10, 20, 30cm distances respectively from the irrigation dripper point, and water content was measured by time after the irrigation. In the glass beads, sensors were installed with or without noise filtering. Closer sensing distance had a higher water content increasing rate, regardless of different coir substrate ratios. There were no differencies of water content increasing rates in 10:0 and 3:7 substrates between the upper side and the side. Whereas, 7:3 and 5:5 substrates showed higher increasing rates on the upper side measurements. Substrates with higher ratios of chip(3:7) had lower increasing rates than others. And, with noise filters, the exatitude of measurement was improved because the variation and deviation were reduced. Therefore, in coconut coir with FDR sensors, an efficient water content measurment to control irrigations can be achieved by installing sensors closer to an irrigation point and upper side of substrates with noise filters.

• Journal of the Korean Wood Science and Technology
• /
• v.8 no.1
• /
• pp.13-21
• /
• 1980

This experiment was carried out to investigate the effect of heating periods on the physical and mechanical properties of maple (Acer mono Max.) by oven heating and heating in water at 100$^{\circ}C$ for 0, 2, 4, and 6 days respectively. The results obtained are summarized as follows: 1. The green volume specific gravity due to oven heating decreased from 6 days of exposure, and that, due to heating in water decreased from 4 days of exposure. 2. The radial shrinkage due to oven heating decreased from 2 days of exposure, but that due to heating in water increased from 6 days of exposure. The tangential shrinkage due to oven heating decreased from 2 days of exposure, but that due to heating in water increased from 2 days of exposure. 3. The amount of water absorption due to oven heating decreased from 2 days of exposure, but that due to heating in water increased from 4 days of exposure. 4. The compressive strength pararelled to grain due to oven heating increased till 4 days of exposure but decreased from 6 days, and that due to heating in water decreased from 2 days of exposure. 5. The shearing strength pararelled to grain due to oven heating increased till 2 days of exposure, but decreased from 4 days of exposure, and that due to heating in water decreased from 4 days of exposure. 6. The bending strength due to oven heating increased till 4 days of exposure but decreased from 6 days, and that due to heating in water decreased from 6 days of exposure. The impact bending absorbed energy due to oven heating decreased from 4 days of exposure, and that due to hearing in water decreased from 2 days of exposure.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.5
• /
• pp.511-526
• /
• 2018

Effects of heat treatment on the characteristics of Royal paulownia (Paulownia tometosa) wood were investigated. The results were compared with those of Suwon silver poplar (Populus tementiglandulosa) and Korean red pine (Pinus densiflora) woods. The wood samples of the three species were treated at $160^{\circ}C$, $180^{\circ}C$, $200^{\circ}C$ and $220^{\circ}C$ in an electric furnace for 2 hours. The changes of color, density, mass loss, and relative crystallinity were investigated before and after heat treatment. The lightness ($L^*$) decreased rapidly from $200^{\circ}C$ in all species. There were no change in red-green chromaticity($a^*$) and yellow-blue chromaticity($b^*$) of Royal paulownia and poplar woods with increasing temperature. Whereas, yellow-blue chromaticity($b^*$) of Korean red pine wood decreased sharply from $200^{\circ}C$. Royal paulownia wood showed appreciable color change(${\Delta}E^*$) after heat treatment above $180^{\circ}C$. Poplar and pine woods, however, presented significant color change from $160^{\circ}C$. Color change of the three wood species increased rapidly with increasing temperature. Mass loss of the three wood species by heat treatment was the highest in the Royal paulownia wood and the lowest in the pine wood. Mass loss and relative crystallinity increased and density decreased slightly with increasing temperature. Consequently, it is revealed that Royal paulownia wood showed considerable differences in the temperature of color change, weight loss and change of relative crystallinity compared to the other wood species.

• Environmental and Resource Economics Review
• /
• v.14 no.1
• /
• pp.167-199
• /
• 2005

The following policy implications can be drawn from this study: 1) The Air Pollution Emission Amount Report published by the Ministry of Environment since 1991 classifies industries into 4 sectors, i. e., heating, manufacturing, transportation and power generation. Currently, the usability of report is very low and extra efforts should be given to refine the current statistics and to improve the industrial classification. 2) Big pollution industries are as follows - s7, s17 and s20. The current air pollution control policy for these sectors compared to other sectors are found to be inefficient. This finding should be noted in the implementation of future air pollution policy. 3) s10 and s17 are found to be a big polluting industrial sector and its pollution reduction effect is also significant. 4) The effect of emission coefficient (${\Delta}f$) has the biggest impact on the reduction of emission amount change and the effect of economic growth coefficient (${\Delta}y$) has the biggest impact on the increase of emission volume. The effect of production technology factor (${\Delta}D$) and the effect of the change of the final demand structure (${\Delta}u$) are insignificant in terms of the change of emission volume. 5) Further studies on emission estimation techniques on each industry sector and the economic analysis are required to promote effective enforcement of the total volume control system of air pollutants, the differential management of pollution causing industrial sectors and the integration of environment and economy. 6) Korea's economic growth in 1990 is not pollution-driven in terms of the Barry Commoner's hypothesis, even though the overall industrial structure and the demand structure are not environmentally friendly. It indicates that environmental policies for the improvement of air quality depend mainly on the government initiatives and systematic national level consideration of industrial structures and the development of green technologies are not fully incorporated.

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.4
• /
• pp.10-39
• /
• 1988

This study investigated the temperatures and relative humidities in the semi-greenhouse type solar dryer with a black rock-bed heat storage and without heat storage and outdoor temperature and relative humidity at 9 a.m. and 2 p.m.. A comparison was made of the drying rates, final moisture contents, moisture content distributions, casehardening stresses, drying defects, volumetric shrinkage of dried lumber for solar- and air-drying from the green condition of mixtures of Douglas-fir, lauan, taun, oak and sycamore 25mm- and 50 mm-thick lumber during the same period for four seasons, and heat efficiencies for solar dryer with and without the heat storage for saving of heat energy and the cost of lumber drying using the solar energy. The results from this study were summarized as follows: I. The mean weekly temperatures in the solar dryers were 3 to $6^{\circ}C$ at 9 a.m. and 9 to $13^{\circ}C$ at 2 p.m. higher than mean outdoor temperature during all the drying period. 2. The mean weekly relative humidities in the solar dryers were about 1 to 19% at 9 a.m. higher than the outdoor relative humidity. and the difference between indoor and outdoor relative humidity in the morning was greater than in the afternoon. 3. The temperatures and relative humidities in the solar dryer with and without the heat storage were nearly same. 4. The overall solar insolation during the spring months was highest and then was greater in the order of summer, atumm, and winter month. S. The initial rate of solar drying was more rapid than that of air drying. As moisture content decreased, solar drying rate became more rapid than that of air drying. The rates of solar drying with and without heat storage were nearly same. The drying rate of Douglas-fir was fastest and then faster in the order of sycamore, lauan, taun and oak. and the faster drying rate of species, the smaller differences of drying rates between thicknesses of lumber. The drying rates were fastest in the summer and slowest in the winter. The rates of solar drying during the spring were more slowly in the early stage and faster in the later stage than those during the autumn. 6. The final moisture contents were above 15% for 25mm-thick air dried and about 10% for solar dried lumber, but the mean final MCs for 50mm-thick lumber were much higher than those of thin lumber. The differences of final MC between upper and lower course of pile for solar drying were greater than those of pile for air drying. The differences of moisture content between the shell and the core of air dried lumbers were greater than those of solar dried lumber, smallest in the drying during summer and greatest in the drying during winter among seasons. 7. Casehardening stresses of 25mm- and 50mm-thick dried lumber were slight, casehardening stress of solar dried lumber was severer than that of air dried lumber and was similar between solar dried lumber with and without heat storage, Casehardening stresses of lumber dried during spring were slightest and then slighter in the order of summer, autumn, and winter. Casehardening stresses of Douglas -fir, sycamore and lauan were slight, comparing with those of taun and oak. 8. Maximum initial checks of 25mm-thick lumber occurred above and below fiber saturation point and those of 50mm-thick lumber occurred in the higher moisture content than thin lumber. As the moisture content decreased, most of checks were closed and didn't show distinct difference of the degree of checks among drying methods. The degree of checks were very slight in case of Douglas-fir and lauan, and severe in case of taun and oak. The degree of checks for 50mm-thick lumber were severer than those for 25mm-thick lumber. 9. The degree of warpage showed severe in case of oak and sycamore lumber, but no warping was found in case of Douglas-fir, lauan and taun. 10. The volumetric shrinkages of taun and oak were large and medium in case of Douglas-fir, lauan and sycamore. 11. Heat efficiencies of solar dryer with heat storage were 6.9% during spring, 7.7% during summer, 12.1% during autumn and 4.1% during winter season. Heat efficiency of solar dryer with heat storage was slightly greater than that of without heat storage. As moisture content of lumber decreased, heat efficiency decreased.

• Korean Journal of Organic Agriculture
• /
• v.20 no.4
• /
• pp.535-542
• /
• 2012

This study was carried out from 2011 to 2012 in order to analyze the cultivation technology system by six organic rice cultivation types in the southern provinces for the purpose of utilizing organic rice farming guidelines. This surveys were conducted by site visit on 8 counties and 115 farms in southern area. Cultivation technology system by six organic rice cultivation types were cultivated by the principle of minimum input or non-input. cropping systems, a mixture of barley and rice, or rice green manure crops were grown. Cultivars were mixture of the local cultivars and Japanese varieties. Soil were managed by a self-manufactured compost, indigenous microorganisms and barley straw without any fertilization. Pest control was mainly practied by purchased eco-friendly organic materials or herbal medication residue and indigenous microbial self-manufactured. Weed was controled by snails and barley straw. In addition, considering the restore of a longtail pitching shrimp and grasshoppers, the fuction of environmental ecology of six organic rice cultivation type proved to be excellent all. Meanwhile, the productivity of the organic farming per 10a were the order of Life and environment > Natural circulation > Stevia > Ji jang > Art and nature > Taepyoung of Farming Methods, but the farmers received prices showed the opposite tendency. Simple profitablity did not show a big difference. But, the productivity of all type of the organic farming were lower then the conventional farming. Finally, If we want to conduct safety and easy farming, we can suggest stevia farming, Natural circulation farming and life and environmental farming out of 6 organic rice cultivation types.