• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.9
• /
• pp.12-17
• /
• 2007

The dynamic false contour noise was analyzed with consideration for the phosphor decay time of an ac PDP by computer simulation based on the measurement of the 1/10 phosphor decay times of the primary colors red, green and blue at the main wavelengths of each phosphor. The noise level of dynamic false contour is strongly dependent on phosphor decay time. The noise level decreases incrementally with the phosphor decay time, whereas the noise width increases. The moving velocity of an object does not affect the noise level. The entire experiment was performed under the condition of 8 subfields ADS driving scheme, 2.5[${\mu}sec$] scan speed, and 5[${\mu}sec$] sustain period with VGA grade panel.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.970-973
• /
• 2006

The effects of the additional visual and auditory stimuli on the loudness evaluation of road traffic noise was investigated by the method of magnitude estimation. As a result, it was shown that additional visual stimulus of noise barrier can influence on the loudness perception of road traffic noise. Also, additional auditory stimuli such as green music or sound of flowing water can influence on the loudness perception of road traffic noise. approximately $5{\sim}10%$ lower than the absence of stimuli. But this effect was disappeared in the range of over 65dB(A).

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.04a
• /
• pp.636-642
• /
• 1997

Laminar vortex shedding behind a circular cylinder with and without splitter plates attached to the circular cylinder at low Reynolds numbers are simulated by solving the unsteady incompressible Navier-Strokes equations. The Strouhal number, lift and drag rapidly change with the splitter plate. Far-field noise from the vortex shedding behind the cylinder is computed using the Lighthill acoustic analogy and the Curle's solution for the Lighthill equation. The acoustic source functions are obtained from the computed near-field velocity and pressure. Numerical results show that the volume quadrupole noise is small at low Mach numbers, compared with the surface dipole noise. Also the amplitude and frequency of the acoustic density fluctuations are varied with the length of splitter plates. The scattering effects at the edge of a splitter plate are considered by using the half-plane Green's function.

• International conference on construction engineering and project management
• /
• 2005.10a
• /
• pp.814-819
• /
• 2005

There is growing consciousness of the environmental performance of buildings in Hong Kong. The Buildings Department, the Lands Department and the Planning Department of the Hong Kong Government issued the first of a series of joint practice notes [1] to promote the construction of green and innovative buildings. Green features are architectural features used to mitigate migration of noise and various air-borne pollutants and to moderate the transport of heat, air and transmission of daylight from outside to indoor environment in an advantageous way. This joint practice note sets out the incentives to encourage the industry in Hong Kong to incorporate the use of green features in building development. The use of green features in building design not only improves the environmental quality, but also reduces the consumption of non-renewable energy used in active control of indoor environment. Larger window openings in the walls of a building may provide better natural ventilation. However, it also increases the penetration of direct solar radiation into indoor environment. The use of wing wall, one of the green features, is an alternative to create effective natural ventilation. This paper therefore presents a preliminary numerical study of its ventilation performance using Computational Fluid Dynamics (CFD). The numerical results will be compared with the results of the wind tunnel experiments of Givoni.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.298-299
• /
• 2014

The solution of transient response of complex stiffness system was obtained using a green function of this system. To derive the green function, governing equation of this systems was expressed in Steady Space and solved by the diagonalization. The solution of this system are written as a convolution integral form. The result that are calculated by the numerical integration process for transient responses was showed properly.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.4
• /
• pp.151-159
• /
• 1998

The heavy equipment such as tracter has been studied to improve rather the performance of engine than comfort. The mufflers of tracters have various specifications according to their uses. The exact analysis of various mufflers is needed to reduce the level of exhaust moise, a major noise source of engine, to improve the ride quality of tracter. In this study, a software based on Green's function is developed to predict the performance of sound transmission loss for a muffler according to the locations of inlet/outlet pipes. The locations of inlet and outlet pipes can be fixed at different position individually. The conventional muffler has the locations of inlet/outlet pipes on the direction of longitudinal axes. On other hand, the inlet and outlet pipes may be located at the circumferential surface of a test muffler such as one of tracter. The software is verified by analysis and experiment on current muffler of tracter and the improvement technique is proposed to reduce the level of exhaust noise.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.682-685
• /
• 2005

In this research, how the evaluation of the spacial image influenced by the environmental friendly elements included in the visual information, and how the selection of the sound changed depending on the characteristics of spatial image by the 40 subjects were carried out. Vast tracts of green land and the waterfront were highly preferred and impressive than the other spaces. The green music, signal with water sound and bird chirping sound were highly scored. In the frequency characteristics of the factors, the first factor was artificial sound(high at the low frequency band), the second was natural sound(uniform at all frequency band) and the third was water sound(high at the middle and high frequency band over 500Hz). This shows that the proposal of the sound which has the frequency characteristics fit to the spacial image should be selected for the soundscape of the target space.

• Nuclear Engineering and Technology
• /
• v.51 no.6
• /
• pp.1479-1486
• /
• 2019

The purpose of the present study is to develop the 3D static and noise simulator based on Galerkin Finite Element Method (GFEM) using the unstructured hexahedral elements. The 3D, 2G neutron diffusion and noise equations are discretized using the unstructured hexahedral by considering the linear approximation of the shape function in each element. The validation of the static calculation is performed via comparison between calculated results and reported data for the VVER-1000 benchmark problem. A sensitivity analysis of the calculation to the element type (unstructured hexahedral or tetrahedron elements) is done. Finally, the neutron noise calculation is performed for the neutron noise source of type of variable strength using the Green function technique. It is shown that the error reduction in the static calculation is considerable when the unstructured tetrahedron elements are replaced with the hexahedral ones. Since the neutron flux distribution and neutron multiplication factor are appeared in the neutron noise equation, the more accurate calculation of these parameters leads to obtaining the neutron noise distribution with high accuracy. The investigation of the changes of the neutron noise distribution in axial direction of the reactor core shows that the 3D neutron noise analysis is required instead of 2D.

• Journal of Broadcast Engineering
• /
• v.21 no.5
• /
• pp.816-823
• /
• 2016

This paper studies a light emitting diode(LED) overlapping method of a head-up display that consists of a digital micro device(DMD) panel and a red, green, blue LED in order to increase the brightness of display system and optical output power. This optimization overlapping method removes a quantization noise which occur due to LED overlapping too excessive and stabilizes the junction temperature of LED. In order to reduce junction temperature of LED, the a correlation between a green duty and LED overlapping ratio is studied. Throughout this study, the brightness of head-up display exhibited high increasement ratio of luminance around 33.3 percent at 39 percent overlapping method.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.476-477
• /
• 2009

The smallest green laser containing a built-in temperature controlling unit has been demonstrated. The device volume was just 0.5 cubic centimeters, which is nearly the same size as existing red and blue diode lasers, has an electrical-to-optical conversion efficiency of 10% and 150 mW power output. Furthermore as an alternative approach for compact green laser development, a quasi-phase matching method with wide spectral bandwidth for the reduction of speckle noise will be presented.