• 아시안잔디학회지
• /
• 제25권2호
• /
• pp.223-228
• /
• 2011

본 연구는 잔디 생육에 따른 그린스피드의 변화를 알아보고자 시행되었으며, 이를 위해 실제 골프장그린의 잔디밀도, 토양수분, 표면경도, 예고를 6개월 동안 매일 조사함으로써 그린스피드 향상을 위한 효과적인 그린관리 방법을 모색하였다. 연구결과 잔디밀도, 토양수분, 표면경도 그리고 잔디예고와 그린스피드 사이의 신뢰도는 각각 0.4742, 0.5690, 0.4632, 0.2806로 측정되어 토양수분이 그린스피드에 가장 큰 영향을 미치는 요소라 사료된다. 따라서, 잔디 생육에 지장을 주지 않는 범위라면 토양수분을 조금 낮게 유지하는 것이 그린스피드를 향상시키는데 유리한 환경이 될 것이다. 잔디밀도의 경우 그린업 시기이며 가장 활발한 생육기인 5~6월에 충분한 밀도를 확보할 경우 빠른 그린스피드를 내는 효과적일 것이라 사료된다. 표면경도는 롤링과 같은 관리 작업을 통해 경도를 높이는 것이 상당히 효과적인 방법이라는 점을 확인할 수 있었다. 다만, 롤링은 잔디에 높은 스트레스를 주는 작업이므로 정기적인 배토작업을 병행하는 관리가 좋은 대안이 될 수 있겠다. 그린예고와 그린스피드 신뢰도는 0.2806으로 토양수분이나 표면 경도에 비해 낮았다. 본 결과를 통해, 예고를 3.0 mm 이하로 낮게 관리하는 것은 그린스피드 향상에 도움이 되며, 시기적으로는 벤트그래스의 생육이 왕성한 시기에 예고를 조절하여 그린스피드를 관리하는 것이 유리하다는 점을 알 수 있었다. 하지만, 예고의 범위가 2.9~3.4 mm로 다양하지 못했던 상황을 고려하여 향후 좀 더 다양한 예고에서 그린스피드를 조사하는 연구가 필요할 것이다. 결과적으로, 잔디예고를 제외한 다른 세 가지 요소 잔디밀도, 토양수분, 표면경도는 그린스피드와 상당 수준의 신뢰도는 있는 것으로 조사되었으며, 잔디의 상태와 시기에 따라 각 요소가 독립적으로 그린스피드에 영향을 미치는 것으로 사료된다. 따라서, 관리자가 연중 높은 그린스피드를 유지하기 위해서는 시기별로 잔디생육 상태를 고려해 각 요소별로 집중 관리가 필요할 것으로 사료된다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.387-390
• /
• 2006

The protective layer of AC-PDP was fabricated by laminating an MgO green sheet. The MgO green sheet was made by coating MgO solution composed of solvent, dispersant, binder, and MgO nano-powder. The MgO solution was coated by the die casting method on the base film. We fabricated three kinds of MgO green sheets of which thicknesses were 20, 28, and $40\;{\mu}m$, respectively. The MgO nano-powder showed lower CL intensity and ${\gamma}i$ than the e-beam MgO. The MgO green sheet applied panels showed low luminance and current density. The efficiency was almost same as the conventional e-beam MgO panel.

• 한국전기전자재료학회논문지
• /
• 제19권12호
• /
• pp.1112-1117
• /
• 2006

The properties of LTCC green tape with addition of binder were investigated in order to understand an effects of binder on multilayer processing. A green sheet form was fabricated through tape casting method with the MLS-22 powder. The lamination density increased with increasing amount of binder and lamination pressure. With increasing amount of binder, the elongation of ceramic sheets increased but the tensile stress and air-permeability decreased. The addition of excessive binder is caused defects in the green sheet during via hole punching. The optimum condition of the via hole without defects was observed from amount of the binder 10 wt%.

• 한국주거학회논문집
• /
• 제14권5호
• /
• pp.141-151
• /
• 2003

Recently, the housing market in Korea has been changed from new construction to building-stocks, and focusing on supplier to focusing on users. Open housing is a design method not only content to users' various needs but also to the means of sustainable development by adapted to longevity of buildings. There are some indicators for Open Housing related to Green Building Certification Criteria which were worked by Mock & ME. But those indicators are limited to flexible design methods. This is a basic study for the selecting of Open Housing indicators for complementation of Green Building Certification Criteria by the analysis of SI housing in Japan, domestic Green Building Labelling and those of other countries.

• 한국전기전자재료학회논문지
• /
• 제21권3호
• /
• pp.236-241
• /
• 2008

The effect of organic solvent mixture ratio on the rheology property of slurry and thickness control of ceramic green sheet was investigated. For selecting a suitable dispersant multiple light scattering method was used to evaluate the particle migration velocity and variation of clarification layer thickness. Using the selected dispersant the dispersion property of solution according to solvent mixture ratio was investigated. Binder and plasticizers were added to formulate slurries and their viscosity was evaluated according to solvent mixture ratio. Ceramic green sheets with average thickness of 30, 50 urn were fabricated via tape casting and their thickness tolerances measured. As a result according to solvent mixture ratio the solution and slurry properties varied and for the mixture ratio of ethanol/toluene of 80/20 the ceramic green sheet with the lowest thickness tolerance was obtained.

• 소성∙가공
• /
• 제16권4호
• /
• pp.313-316
• /
• 2007

The purpose of this paper is the development of measurement algorithm for green-sheet based on the digital image processing technique. The Low Temperature Co-fired Ceramic(LTCC) technology can be employed to produce multilayer circuits with the help of single tapes, which are used to apply conductive, dielectric and/or resistive pastes on. These single green-sheets must be laminated together and fired at the same time. Main function of the green-sheet film measurement algorithm is to measure the position and size of the punching hole in each single layer. The line scan camera coupled with motorized X-Y stage is used. In order to measure the entire film area using several scanning steps, an overlapping method is used.

• 대한가정학회지
• /
• 제43권6호
• /
• pp.171-182
• /
• 2005

This study discusses the environmental awareness and the second-hand clothing usage of those consumers who actively purchase used clothing through a clothing swap at a used clothing market. The study used the questionnaire method, weか the subjects being those with experience of buying second-hand clothing. The findings were as follows. 1. The group of higher environmental awareness differed from the group with low environmental awareness in terms of donating or swapping clothing at a green store or in terms of discontinuing the wearing of used clothing bought from a green store. 2. The higher environmental awareness group valued fashion, status symbols and the alignment with others while the group with low environmental awareness valued comfort and economy more than those with the higher environmental awareness. 3. It was discovered that environmental awareness, education and income levels were interrelated.

• 한국세라믹학회지
• /
• 제43권12호
• /
• pp.859-864
• /
• 2006

For the pressure compaction process of the ceramic powder, the green density is very different with both the ceramic body shape and the processing conditions. The density difference cause non-uniform shrinkages and deformations, and make cracks in the sintered ceramics. In this paper, Material properties of the alumina powder mixed with binder and the friction coefficient between the powder and the tool set were determined through the simple compaction experiments: Also the powder flow characteristics were simulated and the green density was analyzed during the powder compaction process with Finite Element Method (FEM). The results show that the density distributions of the green body were improved at the optimized processing condition and both the possibility of the farming crack generation and rho deformation of the sintered Alumina body were reduced.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2019년도 추계학술대회
• /
• pp.156-157
• /
• 2019

경량전철과 같은 대용량 전력 시스템에 무선전력전송 기술을 적용할 때 전력변환장치의 병렬 운전은 필수적이다. 병렬 연결된 전력변환장치의 경우 출력이 공통으로 연결되어 전력을 공급하게 되는데, 이 때 집전 컨버터의 부하균등제어는 각각의 집전 컨버터의 부하 불균형을 막아줌으로써 집전 컨버터의 수명과 효율이 감소하는 것을 막아준다. 본 논문에서는 부하균등제어방법을 적용한 무선 경량전철 시스템을 통해 기존에 제안된 제어기법을 적용하여 검증하였다. 실증시험의 경우 경산에 위치한 한국철도기술연구원 경량전철시험선의 시험용 경량전철을 두 개의 역사를 반복하여 셔틀 운행하여 최대 400kW의 전력을 두 개의 집전 장치가 전력을 균등하게 공급하는 것을 확인 및 분석하여 논문의 타당성을 검증하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 추계 학술논문 발표대회 논문집
• /
• pp.71-74
• /
• 2006

The introduction of materials and methods of construction which are appropriated to property of green roofs could be a decisive factor in a long-range durability and economical maintenance cost, moreover, it support to variety construction system and organization. In this paper I focused to assure the basic system for waterproofing materials and root barrier apply to green roof as searching the application of field condition. And I suggest proper waterproofing and root barrier as considering the mutual connection and plant growth. and it can be a standard model to adopt to domestic green roof system.