• Journal of Energy Engineering
• /
• v.24 no.2
• /
• pp.129-143
• /
• 2015

Increasing concerns on climate change and energy security accelerated policies to reduce green-house gas emission, especially from the transportation sector. Electric vehicle (EV) has been on the spotlight to deal with such environmental issue and V2G (Vehicle-to-Grid) technology began to draw attentions as an alternative to reduce ownership costs while contributing to an efficient and decentralized power grid. This study conducts a scenario analysis on total cost of ownership of EV under V2G scheme and compare with non-V2G EV and Internal Combustion Engine (ICE) vehicle. As result, V2G service is expected to provide an annual average profit of $210 to EV users willing to reverse flow its residual power in the battery. The profit from V2G service leaves a margin of $4,530 over operational lifetime, compared with $2,420 cost of charge for non-V2G EV. In summary, total cost of ownership of V2G-capable EV was 6.2% less than non-V2G EV and 10.2% higher than ICE vehicle. The results confirm a comparative economic advantage of operating EV under V2G scheme. Increased number of EVs with V2G service has shown to provide positive effects to power industry for valley filling in load distribution, thus, favorably increasing the overall economic feasibility.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.1
• /
• pp.37-47
• /
• 2009

For the inspection of wood, machine vision is the most common automated inspection method used at present. It is required to sort wood products by grade and to locate surface defects prior to cut-up. Many different sensing methods have been applied to inspection of wood including optical, ultrasonic, X-ray sensing in the wood industry. Nowadays the scanning system mainly employs CCD line-scan camera to meet the needs of accurate detection of lumber defects and real-time image processing. But this system needs exact feeding system and low deviation of lumber thickness. In this study low cost CCD area sensor was used for the development of image processing system for lumber being fed. When domestic red pine being fed on the conveyer belt, lumber images of irregular term of captured area were acquired because belt conveyor slipped between belt and roller. To overcome incorrect image merging by the unstable feeding speed of belt conveyor, it was applied template matching algorithm which was a measure of the similarity between the pattern of current image and the next one. Feeding the lumber over 13.8 m/min, general area sensor generates unreadable image pattern by the motion blur. The red channel of RGB filter showed a good performance for removing background of the green conveyor belt from merged image. Threshold value reduction method that was a image-based thresholding algorithm performed well for knot detection.

• Land and Housing Review
• /
• v.3 no.4
• /
• pp.423-431
• /
• 2012

The trends of Green growth and environmentally-friendliness came to be the key development indicator for sustaining global environment for the future. Korean government reflected these trends in the main flows of the national development index. Korean construction industry is concentrating investment on fields related to these trends such as technologies for carbon dioxide deduction, materials or products for environmentally-friendly building and alternative energy development, as well. However, efforts to follow these trends during the construction process as a step for production phrase are not being considered enough. In this study, we analysed current status and points to be improved of on-site environment management by surveying major project owners and representatives of the environmental affairs in the leading companies of those fields. Also, we suggested organizational structure and operation model as a solution for enhancing environmentally-friendliness for systematic approach to manage on-site environment in public construction sites. In addition to these solutions, further approaches such as shifting paradigm of project owners and contractors, securing workforce and practical budget for efficient management activities, developing environmental management manuals, setting standards for evaluation of activities are needed for the stable settlement of on-site environmental management.

• Korean Journal of Food Science and Technology
• /
• v.52 no.3
• /
• pp.212-219
• /
• 2020

The physicochemical characterstics of El Salvadoran Coffea arabica cv. Bourbon coffee extracts under various roasting conditions were investigated. Green beans were roasted under four different conditions (Light-medium, Medium, Moderately dark, and Very dark). The coffee extracts were prepared by using the espresso or drip methods. As the roasting degree increased, the coffee bean moisture content decreased and the ash content increased. The lightness and yellowness of the beans and coffee extracts decreased along with the increasing roasting degree. In the drip coffee, the reducing sugar content decreased and the pH value increased along with the increasing roasting degree. Both in the espresso and drip coffee, total organic acid and chlorogenic acid contents decreased, while the caffeine content increased along with the increasing roasting degree. Therefore, it is suggested that the roasting degree affects the physicochemical characteristics of coffee extracts.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.47 no.2
• /
• pp.79-87
• /
• 2011

A fishing lamp is fishing gear to gather fish in the night. But the cost of oil which is used to a light fishing lamp, goes significantly up to almost one hundred million won for 50 tonnage vessels and forty million won in case of vessels less than 10 tonnages. This cost has almost taken 30.40% of total fishing costs. As oil price increases, the business condition of the fishery gets worse and worse. Therefore, it is very urgent to develop an economical fishing lamp, to solve the problem of fishery's business difficulty. This research aims at developing a fishing lamp for squid jigging fishery and hairtail angling fishery using the LED, which has excellent efficiency and durability. One fishing lamp has about 160Watt capacity and five fishing lamps are installed one aluminium panel in which sea water flows to emit generated heat from LED to outside. Developed fishing lamp lights to an effective direction of jigging and angling operation. This fishing lamp can be controlled to light the direction of fish shoal because the aluminium panel can be controlled to up and down direction. The wave length of fishing lamp has white and blue color. White color light is to gather fish shoal of horizontal direction and blue color light is to gather fish shoal of vertical direction. After development of this fishing lamp, 60.110 units are established on the boat, and operated fishing. Consequently, in the case of squid jigging, spent energy was reduced to 39%, in the case of hairtail angling, 68% of spent energy was reduced. And the catch was more than another boat.

• The Korean Journal of Malacology
• /
• v.28 no.2
• /
• pp.117-123
• /
• 2012

We studied that the effects of mesh size and material of cages on the growth of C. farreri (initial shell height 38.6 mm and shell total weight 7.2 g) held in suspension cage from September 2005 to October 2006. The experiment was performed with two mesh sizes (1 cm and 2 cm) and two materials (net and plastic) of cages in same densities. After 13 months from culture beginning, ranges of shell height and total weight were from 69.7 mm to 73.9 mm and from 36.1 g to 47.0 g, respectively. The survival rate was from 93% to 100%, respectively. The growth rates of the scallop were positively correlated with the mesh size. In the growth rate according to culture material, the growth of scallop in the plastic cage was faster than that in the net cage from September 2005 to June 2006, but the growth in the plastic was slower than that in the net cage for obstruction by attaching organisms from June to October 2006.

• The Korean Journal of Malacology
• /
• v.27 no.1
• /
• pp.43-53
• /
• 2011

The gametogenic cycle and the spawning season in female and male Cyclina sinensis were investigated by quantitative statistical analysis using an image analyzer system, and the biological minimum size (the size at 50% of sexual maturity) was calculated by combination of quantitative data by size and von Bertalanffy's equation. Compared the gametogenic cycle by quantitative statistical analysis with the previous qualitative results in female and male C. sinensis, monthly changes in female and male gametogenic cycles calculated by quantitative statistical analysis showed similar patterns to the gonadal stages in female and male reproductive cycles by qualitative histological analysis. Comparisons of monthly changes in the portions (%) of each area to eight kinds of areas by quantitative statistical analysis in the gonads in female and male C. sinensis are as follows. Monthly changes in the portions (%) of the ovary areas to total tissue areas in females and also monthly changes in the portions of the testis areas to total tissue areas in males increased in March and reached the maximum in May, and then showed a rapid decrease from June to October. Monthly changes in the portions (%) of oocyte areas to ovarian tissue areas in females and also monthly changes in the portions of the areas of the spermatogenic stages to testis areas in males began to increase in March and reached the maximum in June in females and males, and then rapidly dropped from July to October in females and males when spawnig occurred. From these data, it is apparent that the number of spawning seasons in female and male C. sinensis occurred once per year, from July to October. Monthly changes in the number of the oocytes per mm2 and in the mean diameter of the oocyte in captured image which were calculated for each female slide showed a maximum in May and reached the minimum from December to February. Therefore, C. sinensis in both sexes showed a unimodal gametogenic cycle during the year. The percentage of sexual maturity of female and male clams ranging from 25.1 to 30.0 mm in length was over 50% and 100% for clams over 40.1 mm length. In this study, the biological minimum size (sexually mature shell lengths at 50% of sexual maturity) in females and males were 26.85 and 26.28 mm, respectively.

• Korean Journal of Plant Resources
• /
• v.24 no.2
• /
• pp.195-199
• /
• 2011

Tomato (Lycopersicon esculentum M.) is one of the most important crops to the fresh vegetable market and the food processing industry. To evaluate genetic variation in tomato fruits, major characteristics such as soluble solids, acidity and carotenoid contents were analyzed for 771 genetic resource lines. Lines in red color was about 85% which is the largest one followed by peach color, yellow, green, orange, and black. The sweetness of juice ranged from 2.2 to 11.5% (in brix), the average being 5.6%. The acidity ranged from 0.124% to 1.665%, and the average was 0.881%. The lycopine contents was up to 80.4 ${\mu}g/g$, and 43.4 ${\mu}g/g$ in average. ${\beta}$-carotine ranged 1.8 to 48.8 ${\mu}g/g$ and it average was 10.8 ${\mu}g/g$. Statistical analysis indicates that there is coefficient of correlation between acidity and sweetness, acidity and pH, pH and lycopine, lycopine and ${\beta}$-carotine. It is expected that the result of this study can be used for breeding more competitive species with respect to contents in sugar or functional chemicals from the selected characteristic species.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.5
• /
• pp.287-296
• /
• 2020

The wave-impact load on offshore structures can be divided into green-water and wave-slamming impact loads. These wave impact loads are known to have strong nonlinear characteristics. Although the wave impact loads are dealt with in the current classification rules in the shipping industry, their strong nonlinear characteristics are not considered in detail. Therefore, to investigate these characteristics, wave-impact loads induced by a breaking wave on a circular cylinder were analyzed. A model test was carried out to measure the wave-impact loads due to breaking waves in a two-dimensional (2D) wave tank. To generate a breaking wave, the focusing wave method was applied. A series of 2D tank tests under a horizontal wave impact was carried out to investigate the structural responses of the cylindrical structure, which were obtained from the measured model test data. According to the results, we proposed a structural damage-estimation procedure of an offshore tubular member due to a wave impact load. Furthermore, a recommended wave-impact load is suggested that considers the minimum required thickness of each member. From the experimental results, we found that the required minimum thickness is dependent on the impact pressure located in a three-dimensional space on the surface of a tubular member.

• The Korean Journal of Physiology and Pharmacology
• /
• v.19 no.3
• /
• pp.219-228
• /
• 2015

Excessive microglial activation and subsequent neuroinflammation lead to synaptic loss and dysfunction as well as neuronal cell death, which are involved in the pathogenesis and progression of several neurodegenerative diseases. Thus, the regulation of microglial activation has been evaluated as effective therapeutic strategies. Although dieckol (DEK), one of the phlorotannins isolated from marine brown alga Ecklonia cava, has been previously reported to inhibit microglial activation, the molecular mechanism is still unclear. Therefore, we investigated here molecular mechanism of DEK via extracellular signal-regulated kinase (ERK), Akt and nicotinamide adenine dinuclelotide phosphate (NADPH) oxidase-mediated pathways. In addition, the neuroprotective mechanism of DEK was investigated in microglia-mediated neurotoxicity models such as neuron-microglia co-culture and microglial conditioned media system. Our results demonstrated that treatment of anti-oxidant DEK potently suppressed phosphorylation of ERK in lipopolysaccharide (LPS, $1{\mu}g/ml$)-stimulated BV-2 microglia. In addition, DEK markedly attenuated Akt phosphorylation and increased expression of $gp91^{phox}$, which is the catalytic component of NADPH oxidase complex responsible for microglial reactive oxygen species (ROS) generation. Finally, DEK significantly attenuated neuronal cell death that is induced by treatment of microglial conditioned media containing neurotoxic secretary molecules. These neuroprotective effects of DEK were also confirmed in a neuron-microglia co-culture system using enhanced green fluorescent protein (EGFP)-transfected B35 neuroblastoma cell line. Taken together, these results suggest that DEK suppresses excessive microglial activation and microglia-mediated neuronal cell death via downregulation of ERK, Akt and NADPH oxidase-mediated pathways.