• Korean journal of food and cookery science
• /
• v.26 no.3
• /
• pp.300-306
• /
• 2010

Arabica coffee has been classified for trading according to the New York Board of Trade (NYBOT) green coffee classification. The aim of the present study is to evaluate the physiochemical and sensorial characteristics of coffees classified by NYBOT as NY2 (specialty coffee), NY3/4 and NY4/5 (commercial coffee). The density of green coffee was higher for the NY2 sample. The amount of total solids in brewed coffee increase as the green coffee grade decreased and the pH levels decreased as the coffee grade decreased. Descriptive analysis using a 15cm line scale was carried out by 12 trained panelists prepared by espresso coffee and consumer preference tests were carried out by 168 consumers. The NY2 sample had the highest fruity, acidity, sweetness and aftertaste characteristics. In addition, green, rio, sour and astringency characteristics increased as the coffee grade decreased. Acceptance of aroma, flavor, taste balance and overall were higher for the NY2 sample. In the consumer preference test, the NY2 and NY4/5 samples had a similar distribution, but consumers between the ages of 20 to 30 who like to drink brewed coffee more than instant coffee preferred the NY2 than sample over the NY3/4 sample. In conclusion, significant differences were observed among the three groups of green coffee classification in all physicochemical and sensory parameters.

• International Journal of Highway Engineering
• /
• v.13 no.4
• /
• pp.211-220
• /
• 2011

TOD(Transit Oriented Development) has recently been active, which presents that TOD planning elements should be comprehensively taken into consideration in order to enhance domestic transit ridership by changing environments in rail station areas and an empirical analysis on the type of rail station areas and transportation demand should be a prerequisite for usage of future development planning. This study aims to grasp a variety of TOD of influence factors in Seoul rail station area and to perform analysis to identify relationship between public transportation demand and these TOD design factors. To make it come true, we gathered data with respect to Density, Diversity, and Accessibility as representative TOD planning elements and carried out factorial and regression analysis. Consequently, we drew 7 influence factors base on factorial analysis: Factor 1(Diversity/ -Use Mix(LUM)), Factor 2(Density/development density), Factor 3(Accessibility/public transportation facility supply), Factor 4(Design/street design), Factor 5(Green/access mode (pedestrian, bike), Factor 6(Design/subway size), Factor 7(Accessibility/Public transit operation) As the result of model development by using factorial and regression analysis, positive influence factors on passenger flow in rail station area are Factor 1(Diversity : Land-Use Mix), Factor 3(Accessibility : public transportation facility supply), Factor 2(Density : development density), Factor 5(Design/ access mode) and Factor 6(subway size) Next, negative influence factor on passenger flow in rail station area shows Factor 7(Accessibility/Public transit operation) as the most influential factor. This is because the growth of service interval of linked subway and bus leads to reduced demand.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.22 no.3
• /
• pp.55-71
• /
• 2019

The purpose of this study is to propose an evaluation method to assess green environments of streetscapes to improve urban street green spaces in Jeonju City. Through a rapid assessment of urban street green spaces, we suggest an objective basis for expanding street green space as well as for adopting sustainable maintenance and improvement measures. We choose 12 sections of streetscapes (roads and sidewalks) to investigate existing street conditions which have more than four lanes and function as major road axes. Six large roads and six medium roads of Jeonju City center area are investigated as pilot assessment study sites. Site inventory checklists consist of environmental characteristics of streetscape, street tree status, and planting condition evaluation. Environmental characteristics of streetscapes are composed of physical and neighborhood factors. For instance, items for physical factors are types and width of road/sidewalks, paving materials, tree protection materials, and green strip. And surrounding landuse is a neighborhood factor. Assessment items for street tree status are street plant names (tree/shrubs/ground cover), size, and planting intervals. Planting condition evaluation items are tree shape, damage, canopy density, and planting types with existence of adjacent green space. Evaluation results are classified into three levels such as A(maintain or repair), B(greening enhancement), and C(structural improvement). In case of grade A, streetscapes have enough sidewalk width for maintaining green strip and a multi-layered planting(in large road only) with fairly good growing conditions of street trees. For grade B and C, streetscapes have a moderate level of sidewalk width with a single street tree planting. In addition, street tree growing conditions are appeared poor so that green enhancement or maintenance measures are needed. For median, only grade B and C are found as its planting growing foundations are very limited in space. As a result, acquiring enough sidewalk space is essential to enhance ecological quality of urban street green. Especially, it is necessary to have green strip with reasonable widths for plant growing conditions in sidewalks. In addition, we need to consider native species with multi-layer plant compositions while designing street green.

• Corrosion Science and Technology
• /
• v.8 no.1
• /
• pp.27-39
• /
• 2009

Non metallic composite materials, for example, GECM(graphite epoxy composite material) show high specific strength because of low density. These kinds of non metallic composite materials improved the structural effectiveness and operation economics. However, if these materials contacted several metals, corrosion can be arisen since non metallic composite materials have electrical conductivity. This paper dealt with galvanic corrosion between graphite epoxy composite material and several metals. Base on the electrochemical galvanic corrosion test between GECM and metals, corrosion current of carbon steel and aluminium increased with time but corrosion current of stainless steels and titanium decreased and galvanic potential increased. This behavior shows the galvanic corrosion depends upon the presence of passive film. Also, galvanic effect of GECM coupled with ferrous alloys and non-ferrous alloys was lower than that of 100% graphite, which is attributed to lower exposed area of graphite fiber in the GECM than apparent area of the GECM specimen used for the calculation of galvanic current in this work.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.34 no.4 s.117
• /
• pp.105-115
• /
• 2006

Biotope Area Ratio ($BFF; BiotopFl{\"{a}}chenFaktor$) was developed in Berlin, Germany in 1990s and introduced to Korea in 1999. It is the ratio of the uncovered soil areas which have the natural circulating capability compared to whole development areas. This study seeks for alternative ways to increase Biotope Area Ratio of residential areas in the metropolitan areas of Korea by investigation on new housing developments. The study investigates four new towns including Seoul Eunpyung new town, Yongin Kusung district, Goyang Pungdong and Juyeopdong districts and Hwasung Dongtan district. The Biotope Area Ratio of study sites is between 23.51 % and 40.69%. This result is not relevant to land use conditions, such as the building-ta-land ratio, natural ground green area ratio. This ratio satisfies the minimum requirements of City of Seoul, except 2 sites. Considering that the study sites are relatively low density land use areas compared to Seoul's average, thus, a higher standards is necessary for new town housing complexes. Because Biotope Area Ratio includes artificial ground green area ratio, Biotope Area Ratio is possible can be increased with decreased natural ground green area ratio. And so, when Biotope Area Ratio is applied to new town development, it must go side by side with a definite natural ground green area ratio.

• Asian Journal of Atmospheric Environment
• /
• v.11 no.3
• /
• pp.194-201
• /
• 2017

This study investigates the factors that affect China's air pollution using city-level panel data and spatial econometric models. We address three air pollutants ($PM_{10}$, $SO_2$, and $NO_2$) present in 30 cities in China between 2004-2012 using global OLS and spatial models. To develop the spatial econometric analysis, we create a spatial weights matrix to define spatial patterns based on two neighborhood criteria - the queen contiguity and k nearest neighbors. The results show that the estimated coefficients are relatively consistent across different spatial weight criteria. The OLS models indicate that the effect of green spaces is statistically significant in decreasing the concentrations of all air pollutants. In the $PM_{10}$ and $SO_2$ analyses, the OLS models find that the number of buses and population density are also positively related to a reduction in the concentration of air pollutants. In addition, an increase in the temperature and the presence of secondary industries increase $SO_2$ and $NO_2$ concentrations, respectively. All spatial models capture a positive and significant effect of green spaces on reducing the concentration of each air pollutant. Our results suggest that green spaces in cities should receive priority consideration in local planning aimed at sustainable development. Furthermore, policymakers need to be able to discern the differences among pollutants when establishing environmental policies.

• KIEAE Journal
• /
• v.8 no.3
• /
• pp.27-36
• /
• 2008

Urban architecture density is getting higher, and this trend is expected to continue in the future. Therefore, skyscrapers are being brought into relief as future alternative architecture beyond symbolic meaning in the aspect of demand and supply of urban space. However, skyscrapers which were newly built have many problems such as consumption of enormous amounts of energy, destruction of natural environment, and traffic jam. For this reason, environment-friendly skyscrapers based on the concept such as Green Building and Green Skyscraper started to be built around the world. However, plans or evaluation standards, which take account of the environment-friendly aspect of skyscrapers, leave much to be desired. And especially it is hard to find environment-friendly skyscrapers. Therefore, this study aims to establish the concept of environment-friendly skyscrapers that has not properly been defined, and to find realistic planning methods and practical alternatives through the analysis of the works that have brilliant ideas about environment-friendly architectural method. From the perspective of architectural planning, we did case analysis focused on site planning, form planning, elevation and floor planning, and tried to give useful ideas for high-rise architectural planning in Korea by finding practical solution focused on the active use of natural energy, saving resources, the reduction of wastes, natural architectural environment design and natural friendly system from the view of environment-friendly technological analysis.

• Food Science and Preservation
• /
• v.5 no.3
• /
• pp.207-210
• /
• 1998

To prolong the shelf life of green chili pepper, packaging films such as 30 $\mu\textrm{m}$ low density polyethylene(LDPE), 20 $\mu\textrm{m}$ perforated polyolefin (SM250), 30 $\mu\textrm{m}$ cast polypropylene (CPP) and 15 $\mu\textrm{m}$ polyolefin (MPD) were used. LDPE showed a suitable gas concentration which consisted of 3-5% O$_2$ and below 5% CO$_2$for keeping quality of green chili peppers after 10 days. Though weight loss was 9.3% for SM250 after 5 days, others showed below 2.0% weight loss after 40 days. Green chili peppers inside CPP package revealed a great decrease in ascorbic acid content after 30 days. SM250 showed a less total microbial count among packages, but there was no great differences among packages.

• Journal of Forest and Environmental Science
• /
• v.34 no.3
• /
• pp.246-248
• /
• 2018

Urban development and population have augmented the increase of impervious land-cover. This phenomenon has amplified the effects of climate change and increasing urban island effects due to increases in urban temperatures. Seoul, South Korea is one of the largest metropolitan cities in the world. While land uses in Seoul vary, land cover patterns have not changed much (under 2%) in the past 10 years, making the city a prime target for studying the effects of land cover types on the urban temperature. This research seeks to generalize the urban temperature of Seoul through a series of statistical tests using multi-temporal remote sensing data focusing on multiple scales and typologies of green space to determine its overall effectiveness in reducing the urban heat. The distribution of LST values was reduced as the size of urban forests increased. It means that changing temperature of large-scale green-spaces is less influenced because the broad distribution could be resulted in various external variables such as slope aspect, topographic height and density of planting areas, while small-scale urban forests are more affected from that. The large-scale green spaces contributed significantly to lowering urban temperature by showing a similar mean LST value. Both of concentration and dispersal of urban forests affected the reduction of urban temperature. Therefore, the findings of this research support that creating urban forests in an urban region could reduce urban temperature regardless of the scale.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.2
• /
• pp.104-110
• /
• 2003

As exhaust emission standards are more stringent, higher conversion efficiency of automotive catalytic converter is required. In addition, catalytic converter is deteriorated during mileage accumulation of vehicle. Therefore the specification of catalytic converter should be decided in consideration of emission standards and deterioration. Because the decision of the specification of catalytic converter is required at the beginning of vehicle development procedure, it is important and necessary to fix the target values of green vehicle exhaust emissions. To do this, a linear regression analysis was done with in-use exhaust emissions data of 5 different kinds of vehicle that received US94 emission standards certification, and data handling methods including some statistical estimation were proposed. As a result, the fixed target values of NMHC, CO, NOx of green vehicle against US94 emission standards were 0.079, 0.83, 0.116, respectively. And expected in-use deterioration factor of NMHC, CO, NOx were 1.75, 2.02, 1.38, respectively. And also it was blown that even if failure rate is 30% after 80,000km driven, it might be sufficiently safe from emission failure confirmatory test of Korea. It is hopeful to make a database of in-use emissions to increase the confidence in correctness of the calculated target values.