Journal of Construction Engineering and Project Management
/
제4권2호
/
pp.12-22
/
2014
Over the last decade, Saudi Arabia has experienced significant economic increases as evidenced by the 30% growth in its gross domestic product; furthermore, the construction industry has increased 10% in the same time period. Due to this significant growth, the construction industry is encountering issues related to construction quality resulting in significant waste and associated environmental impacts. In this research, we applied our previously developed framework that integrates three different methods-Lean, Green, and Six-sigma - to a residential construction complex in Saudi Arabia. Our aim of this case study was to explore the application of the framework in practice to glean quantitative results and further validate the framework. In the case study, we used the developed framework to identify a significant issue related to quality and delays - final completion of 53 residential units was delayed because of failed exterior buildings surfaces. We then used the framework to define the causes behind the defects via a field investigation of the 53 units. Of the defect, construction execution was responsible for 43% of the defect, 31% untrained workers, 19% unfavorable construction weather condition, with 7% accounting for other issues. A procedure was developed in concert with the construction manager and overall developer reducing the amount of rework and waste causes revealed by the field examination and the framework. Although two steps were added to the original construction process to overcome waste causes, still save a lot of resources and reduces environmental impact. In summary, we found that the Lean, Green, Six-sigma framework increased productivity, quality, and reduced waste.
Kim, Gwang Hoon;Moon, Kyoung-Hyoun;Kim, Je-Yoon;Shim, Junbo;Klochkova, Tatyana A.
ALGAE
/
제29권4호
/
pp.249-265
/
2014
As with land crops, cultivated algae are affected by various diseases ranging from large outbreaks of a disease to chronic epiphytes, which may downgrade the value of the final product. The recent development of intensive and dense mariculture practices has enabled some new diseases to spread much faster than before. A new disease is reported almost every year, and the impact of diseases is expected to increase with environmental change, such as global warming. We observed the incidence of diseases in two Pyropia sea farms in Korea from 2011 to 2014, and estimated the economic loss caused by each disease. Serious damage is caused by the oomycete pathogens, Pythium porphyrae and Olpidiopsis spp., which decreased the productivity of the Pyropia sea farms. In Seocheon sea farms, an outbreak of Olpidiopsis spp. disease resulted in approximately US $1.6 million in loss, representing approximately 24.5% of total sales during the 2012-2013 season. The damage caused by green-spot disease was almost as serious as oomycete diseases. An outbreak of green-spot disease in the Seocheon sea farms resulted in approximately US $1.1 million in loss, representing 10.7% of total sales in the 2013-2014 season in this area. However, the causative agent of green-spot disease is still not confirmed. "Diatom felt" is regarded as a minor nuisance that does not cause serious damage in Pyropia; however, our case study showed that the economic loss caused by "diatom felt" might be as serious as that of oomycete diseases. Bacteria and cyanobacteria are indigenous members of epiphytic microbial community on Pyropia blades, but can become opportunistic pathogens under suitable environmental conditions, especially when Pyropia suffers from other diseases. A regular acid wash of the Pyropia cultivation nets is the most common treatment for all of the above mentioned diseases, and represents approximately 30% of the total cost in Pyropia sea farming. However, the acid wash is ineffective for some diseases, especially for Olpidiopsis and bacterial diseases.
최근들어 우리나라 국민의 식품소비 형태가 점차 고급화됨에 따라 메밀의 어린 식물체와 종실은 건강 별미식품의 원료로서 수요량은 단속 증가될 전망이다. 엽채소용으로 이용되는 메밀의 어린 식물체는 30% 이상의 단백질과 500mg / 100g 이상의 Rutin과 상당한 양의 미네랄, 비타민 함유하여 단경기 재배시 녹채소의 수량은 파종량, 파종기, 재배환경 조건에 따라서 262~2,270 / 10a로 차이가 매우 컸으며 예상조수익도 52.4~183.5만원 / 10a이었다. 엽채소용 메밀의 육묘기간을 20, 25, 30일로 하였을 경우 육묘기간이 길수록 초장, 줄기의 굵기, 잎의 수와 크기가 증대되었다. 4배체품종 신주대메밀의 생체중은 2배체품종 수원재래와 신농001에 비하여 35%가 더 무거웠으며 엽육이 두껍고 잎이 커서 상품가치가 더 좋았다.
The task of improving a fungal strain is highly time-consuming due to the requirement of a large number of flasks in order to obtain a library with enough diversity. In addition, fermentations (particularly those for fungal cells) are typically performed in high-volume (100-250 ml) shake-flasks. In this study, for large and rapid screening of itaconic acid (IA) high-yielding mutants of Aspergillus terreus, a miniaturized culture method was developed using 12-well and 24-well microtiter plates (MTPs, working volume = 1-2 ml). These miniaturized MTP fermentations were successful, only when highly filamentous forms were induced in the growth cultures. Under these conditions, loose-pelleted morphologies of optimum sizes (less than 0.5 mm in diameter) were casually induced in the MTP production cultures, which turned out to be the prerequisite for the active IA biosynthesis by the mutated strains in the miniaturized fermentations. Another crucial factor for successful MTP fermentation was to supply an optimal amount of dissolved oxygen into the fermentation broth through increasing the agitation speed (240 rpm) and reducing the working volume (1 ml) of each 24-well microtiter plate. Notably, almost identical fermentation physiologies resulted in the 250 ml shake-flasks, as well as in the 12-well and 24-well MTP cultures conducted under the respective optimum conditions, as expressed in terms of the distribution of IA productivity of each mutant. These results reveal that MTP cultures could be considered as viable alternatives for the labor-intensive shake-flask fermentations even for filamentous fungal cells, leading to the rapid development of IA high-yield mutant strains.
In this study, the heat flow of the plant scale aluminum extrusion process was investigated to establish optimum continuous heat treatment conditions. During the extrusion of 6061 aluminum alloy, processing parameters such as the extrusion pressure, speed and temperature histories of billets were logged as a function of time. The surface temperature of the billets increased at constant ram speed, while it decreased with decreases of the ram speed. In order to maintain the billet temperature within a solutionizing temperature range prior to the succeeding water quenching step, the ram speed or the temperature of the blower should be controlled. The temperature histories of the billets during the extrusion and hot air blowing processes were successfully simulated by using the velocity boundary model in ANSYS CFX. The methodology to design an optimum process by using a commercial simulation program is described in this study on the basis of the metallurgical validation results of the microstructural observation of the extrudates. The developed model allowed the advantages of taking into account the motion of the extrudate coupled with the temperature change based on empirical data. Calculations were made for the extrudate passing through the isothermal chamber maintained at appropriate temperature. It was confirmed that the continuous heat treatment system is beneficial to the productivity enhancement of the commercial aluminum extrusion industry.
사업장 가연성폐기물은 그 자체의 높은 발열량(3,000kcal/kg 이상)으로 인해 고형연료 원료로 매우 유용하게 사용할 수 있다. 현재 국내 대부분의 고형연료 제조업체는 제조가 쉽고 발열량이 높은 필름류 플라스틱을 주로 사용하고 있기 때문에 본 연구에서는 보다 다양한 폐기물을 이용하여 고형연료 제조 가능성을 알아보았다. 실험에 사용된 폐기물 중에서 폐합성수지, 폐타이어로 제조된 고형연료는 발열량이 6,000kcal/kg 이상을 나타내었으며 폐지, 폐목재가 혼합될 경우 발열량은 감소하였다.
Fischer-Tropsch 합성용 Co/$Al_2O_3$ 촉매에서 알루미나 지지체에 인산 용액으로 알루미나 표면을 개질하여 촉매적 활성은 물론이고, 기계적 강도와 수열 안정성을 개선하였다. FT-IR과 같은 촉매 표면 분석법을 통하여 P 첨가로 알루미나 표면에 $AlPO_4$ 상이 생성되어 촉매인 코발트와 지지체인 알루미나 사이의 상호작용이 약화되어 촉매의 환원도가 높아졌음을 보였다. 이에 따른 촉매성능을 평가하기 위하여 $C_{5+}$ productivity와 turnover frequency를 계산하였다. 또한, 2 wt.% P 첨가 알루미나를 대상으로 지지체의 소성온도가 촉매활성에 미치는 영향도 살펴보았다. 한편, 고온 가압 하에서 물을 이용하여 P 첨가 알루미나(P-알루미나)를 지지체로 한 촉매의 수열 특성을 살펴보았으며, 실험 전후의 XRD 패턴을 분석함으로써 P 첨가 알루미나 기반 촉매가 수열 안정성이 우수하다는 것을 증명하였다. 뿐만 아니라, 촉매의 기계적 강도를 측정하기 위하여 유동화 반응기를 직접 제작하여 P-알루미나 기반 촉매의 P 함량이 증가할수록 마모도가 감소함을 확인하였다. 촉매 활성, 수열 안정성, 그리고 기계적 강도를 모두 고려하면, 알루미나에 첨가된 P의 함량이 1~2 wt.% 이고, 지지체를 $500^{\circ}C$에서 소성하여 제조한 촉매가 가장 좋은 성능을 보였다.
본 연구는 시화간척지에서 하계 사료작물의 초종 및 품종이 생육특성 및 생산성에 미치는 영향을 구명하기 위하여 수행하였다. 시험에 공시된 하계사료작물은 옥수수, 수수×수단그라스 교잡종 및 기장이었다. 시험에 공시된 각각의 품종은 옥수수는 광평옥, P15453, P1952 및 P2088을 이용하였고, 수수×수단그라스 교잡종은 877F, Green star, Honey chew 및 Turbo gold 품종을 이용하였다. 기장은 국립식량과학원에서 육성한 이백찰, 금실찰 및 만홍찰 품종을 이용하였다. 사료작물의 파종은 옥수수와 수수×수단그라스 교잡종은 2019년 5월 21일 그리고 기장은 6월 4일에 하였으며 수확은 9월 2일에 하였다. 옥수수의 초장 및 착수고는 품종간에 유의성이 없었으며 수량은 P1543 품종이 가장 많았고 P2088 품종이 가장 적었으나 처리간 유의성은 나타나지 않았다. 수수×수단그라스 교잡종은 877F의 초장이 가장 컸으며 Turbo gold 품종이 가장 작았다(p<0.05). 건물수량은 877F가 3,862 kg/ha로 가장 많았고 Green star가 2,669 kg/ha로 가장 낮았다(p<0.05). 기장의 초장은 이백찰이 138cm로 가장 컸으며 나머지 품종은 유의적인 차이가 없었다. 기장의 생초수량은 평균 15,778 kg/ha로 옥수수나 수수×수단그라스 교잡종보다 많았으며, 건물수량은 평균 4,780 kg/ha이었으며 이백찰 품종이 다른 품종들에 비해 가장 많았다(p<0.05). 옥수수의 사료가치에서 TDN 함량은 P2088품종이 가장 높았고 광평옥이 가장 낮았다(p<0.05). 수수×수단그라스 교잡종은 Green star 및 Honey chew 품종이 유의적으로 높았으며 RFV 값은 Turbo gold가 가장 낮았다. 기장은 평균 조단백질 함량은 7.03%이었고 TDN 및 RFV 값은 금실찰이 64.36% 및 106으로 가장 높았다. 염농도에 따른 하계 사료작물의 발아율 조사에서 옥수수는 0.4%까지는 83.1%의 발아율을 나타내었다. 특히 P2088 및 P1921 품종은 0.6% 농도에서도 발아율이 80% 이상이었다. 수수×수단그라스 교잡종은 877F 품종의 발아율이 0.8% 농도에서도 93.3% 이었으며 Honey chew는 88.3%로 나타나 다른 품종에 비해 염 농도에 대한 저항성이 높은 것으로 나타났다. 기장은 0.6%의 염 농도에서도 84.0-88.7%의 높은 발아율을 나타내었다. 이상의 결과를 종합하여 볼 때 염농도가 높은 시화 간척지에서 가장 적합한 초종은 기장이 추천되었으며, 이백찰은 수량이 높아 적합한 품종으로 권장되었다.
Vertical farming systems offer many advantages in urban spaces. They have also been proposed as an engineering solution to increase the productivity per unit area of cultivated land by extending crop production in the vertical dimension. However, soil water retention is a major constraint affecting the plant environment. This study analyzed the effects of growth environment of Tropaeolum majus and Fragaria spp., on the vertical farming system, by using four different types of cover material types including sphagnum moss (Control), a shading net (S.N.), multi-layered fabric (M.L.F.), and non-woven fabric (N.W.F.). The volumetric soil moisture contents and plant characteristics were investigated from May to September 2014. Plant materials were individually cultivated in hanging baskets measuring $30{\times}17{\times}17cm$, filled with a mixture of soil and perlite, and placed at 1.5m height. Each treatment was performed in quadruplicate and consisted of five plants, amounting to a total of 20 plants. The analysis indicated that different covers were associated with multiple functions and soil water retention improvements may have a positive impact on the vertical farming system. The difference in soil water retention increased in the following order: M.L.F. > Control > N.W.F. > S.N.. Furthermore, the differences in plant height and survival rate increased in the following order: M.L.F. > Control > N.W.F. > S.N. Therefore, M.L.F yielded satisfactory good response for the vertical farming system of cover materials. Our results clearly demonstrate that vertical spaces represent an attractive alternative to urban farming and suggest that further increases in yield may be achieved via different cover materials in vertical farming using hanging baskets.
국내 유기농 밭 토양은 가축분퇴비, 유기질비료 등의 지속적인 투입에 의해 인산을 포함한 다량 양분이 축적되고 있다. 친환경 토양관리를 위하여 가축분퇴비나 유기질비료의 대안으로 보리(B)와 헤어리베치(H)의 혼파를 활용하고자 한다. 보리와 헤어리베치의 혼파가 녹비작물의 수량 및 양분 생산성에 미치는 효과를 평가하기 위하여, 가축분퇴비 연용으로 토양 양분이 축적된 유기농 밭 토양에 보리와 헤어리베치를 2016년 11월에 기준 파종량(B 160 kg/ha ; H 90 kg/ha) 대비 B 66%와 H 33%, B 33%와 H 66% 비율로 혼파 재배하였다. 수확기에 녹비작물 수량, 양분생산성을 분석하여 혼파 효과를 평가한 결과는 아래와 같다. 보리와 헤어리베치를 혼파 할 경우 녹비작물 수량이 헤어리베치 단파 보다 78~132% 증가되어, 혼파시 수량증대 효과가 있었다. 질소 생산성도 혼파에서 보리 단파보다 43~44% 증가, 인산 생산성도 헤어리베치 단파보다 200% 이상 증가되어 혼파의 양분생산성 증대 효과를 확인하였다. 본 연구 결과 보리와 헤어리베치의 혼파재배는 녹비작물의 수량 및 질소와 인생산성 증대에 효과적이라는 결과를 얻었으며, 2가지 측면을 모두 고려할 때, 기준 파종량 대비 보리 66%와 헤어리베치 33%를 혼파하여 파종한 처리(B66H33)가 가장 비료로써의 가치가 높아 양분이 축적된 유기농경지에서 활용할 수 있을 것으로 판단된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.