• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.20 no.6
• /
• pp.67-77
• /
• 2017

Demands for housing has diversified recently due to low birth rate and the growth of aging population. Also, a share of idle houses and obsolete houses over 20 years old is gradually rising. Therefore, there is a need for a sustainable, environment-friendly improvement policy that is in line with a new housing paradigm and avoids full-scale new construction, such as a customized housing renovation plan considering local economic circumstances. Therefore, afforestation system applicable to buildings are assessed positively, but lack objective performance evaluation. Through one-year, long-term monitoring of replicated obsolete buildings that have poor insulation performance, this study calculated monthly average power consumption and analyzed power charges by applying pricing plans before and after the revision of progressive tax in order to examine economic effects expected by applying the afforestation system. In the obsolete buildings, the study showed that monthly average power consumption was reduced by 16.6kWh with 5.2% average reduction rate. Highest reduction was made in July at 11.3%. Aggregate monthly power consumption charges were relatively high in winter before and after the revision of progressive tax. Power charges reduction effect was highest in March when monthly power consumption was reduced to 300kWh level by applying the afforestation system.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.6
• /
• pp.873-880
• /
• 2011

As environmental pollution, global warming, and exhaustion of fossil fuel become global issue recently, there has been strong research motivation to develop green energy technology. Along the same line of motivation, some research efforts have been put into the development of environment-friendly bicycle equipped with various smart energy technologies to increase the usability of the bicycle as short-distance transportation. Among the technologies related with new generation bicycle, PAS (power assist system) is one of the most important systems that are essential in efficiently integrating human power and the electrical power supplied by electric motor driven by battery. In this paper, a novel torque sensor technology which is core component for PAS is proposed. Unlike existing technologies, strain gauges are attached to rear shaft directly under the hub bearings, which eliminates the requirement of slip-ring, Furthermore, the sensor is able to not only measure the torque transmitted to driving axle by human but also estimate the position of the gear to which the chain is currently engaged.

• Korean Chemical Engineering Research
• /
• v.50 no.6
• /
• pp.1043-1048
• /
• 2012

In this study, activated carbons (ACs) were modified as electrode materials for an electric double layer capacitor (EDLC) by controlling oxygen- and nitrogen-containing functional groups. The morphological and chemical properties of ACs were analyzed through scanning electron microscopy (SEM), fourier transform infrared (FTIR) spectrometer, automatic elemental analyzer (EA) and Boehm titration. Also, charge/discharge tests were performed to investigate the EDLC performance. Oxygen- and nitrogen-containing functional groups were introduced on the surface of ACs through acid and urea treatments, respectively. ACs with nitrogen-containing functional groups showed 2 mA increase of gravimetric discharge capacity and quick achievement of maximum charge/discharge performance. However, ACs with oxygen-containing functional groups showed low discharge capacity and its gradual decrease during further cyclic test, since the functional groups interrupted adsorption/desorption of charges in the electrolyte on the surface of ACs.

• Applied Chemistry for Engineering
• /
• v.3 no.1
• /
• pp.1-6
• /
• 1992

In this energy and environment conscious age, methanol has come to attention increasingly since the well established process is commercially available to produce methanol from abundant low grade carbonaceous resources ; methane, carbon dioxide, coal and biomass etc. Methanol is a Clean energy source which is a readily storable and transportable liquid. It is elaborated to correlate power generation, city gas and chemical feed stocks including transportation fuel, enhancing the national efficiency of resource utilization as well as reducing the environmental problems for the future via C1 technology. It is emphasized that $CO_2$ could be used to produce methanol as a mean of hydrogen storage as in the nature, which will alleviate the environmental problem such as green house effect.

• Journal of Ocean Engineering and Technology
• /
• v.31 no.1
• /
• pp.36-46
• /
• 2017

Most of the studies on the hydraulic characteristics of wave-current interaction have used 2-D hydraulic experiments or 2-D numerical simulations. However, it is difficult to understand the wave-current interaction found in actual estuaries using these. Therefore, a numerical water tank was constructed in this study to perform simulations involving a 3-D river mouth. The result showed a change in the water surface at the river mouth from the wave-current interaction. With an increase in the ratio ($V_c/C_i$) between the river current and wave celerity, the wave height and mean water level of the river increased at the wave and current meeting point. A higher $V_c/C_i$ caused a stronger wave-current interaction and increased the turbulence kinetic energy. Thus, the wave height attenuation became larger by the wave-current interaction with a higher $V_c/C_i$. In addition, it was possible to understand the flow characteristics in the vicinity of the river mouth as a result of the wave-current interaction using the mean flow and mean time-averaged velocity at the mid-cross section of river.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.4 no.4
• /
• pp.300-306
• /
• 2011

In this paper, we suggest a usage profiles for electric home appliances. In Korea, it is published the records for total consumption of electricity in a house but the electric home appliance consumption records in a households are not. To build the data, we must collect the usage of every appliances in a house and the information of the household which live in the house. Unfortunately, it is hard to get the data because of the worry about the breach of privacy. In this paper, we make a scenarios on the electricity consumption pattern of a few households type. Based on the conjecture, we make the power consumption profiles for some home appliances. Comparison to the total electric consumption records for a house, we found our scenarios are quite reasonable.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.14 no.4
• /
• pp.11-23
• /
• 2011

Mountain streams, which are major components of an entire river network, play an important role as the source of water, sediment, coarse and fine organic matter, and nutrients for lowland rivers. Therefore, dynamics and downstream linkages of each compartment of the mountain stream can be essential for watershed management in catchment scale. The dynamics and downstream linkages are understood as a development of step-pool sequences along a river course. Recently, stream restoration after flooding event often employ the development of step-pool sequences in the world. In this paper, we 1) examined the geomorphic characteristics and the role of step-pool sequences in steep mountain streams by reviewing the results of past studies, and 2) introduced the case studies of stream restoration using step-pool sequences, and finally 3) addressed design methods considering geometry and stability of artificial step-pool sequences for stream restoration. Step-pool sequences play an important role not only as roughness with energy dissipation but also as heterogeneity of stream feature for aquatic habitat. Step-pool sequences, even if they are constructed artificially along a stream, may be effective for small stream restoration considering eco-friendly torrent controls. So far the artificial step-pool sequences were employed for mountainous streams, but those would be applied to urban stream.

• New & Renewable Energy
• /
• v.18 no.2
• /
• pp.1-8
• /
• 2022

This study aimed to determine the optimal conditions for fabricating pitch pine (PCP) and Mongolian oak (MOK) pellets using chestnut-shell tea waste (CSW) and castor oil (CSO) as additives. For pellets fabricated using a pilot-scale flat-die pellet mill, all moisture content (MC) was in line with A1 wood pellet standards for residential and small-scale commercial uses designated by the National Institute of Forest Science at the Republic of Korea (NIFOS), regardless of fabricating conditions; the durability of PCP pellets prepared using PCP particles with 10% MC, and CSW addition also satisfied these criteria. The moisture tolerance of PCP pellets improved with combination of 2 wt% CSW and 2-6 wt% CSO. Overall, use of 20 mesh CSW as an additive, PCP with 10% MC, and MOK with 12% MC was found to be optimal. Moreover, using CSO as an additive, high-quality PCP and MOK pellets can be fabricated by adjusting the particles to 12% MC. However, the durability of PCP and MOK pellets prepared using these conditions did not meet the wood pellet standards for residential and small-scale commercial use. Therefore, further research is needed to improve the durability of these pellets.

• New & Renewable Energy
• /
• v.18 no.3
• /
• pp.23-31
• /
• 2022

This study evaluated the potential of coffee waste (CW) and used frying oil (UFO) as an additive in the production of pitch pine (PIP) and Mongolian oak (MOK) pellets. Ash contents obtained from CW and UFO were 0.5% and <0.1%, respectively. The calorific values of UFO (31.4 MJ/kg) and CW (26.3 MJ/kg) are higher than PIP (20.6 MJ/kg) and MOK (19.1 MJ/kg). For pellets fabricated using a pilot-scale flat-die pellet mill, regardless of fabricating conditions, moisture content (MC) and bulk density of PIP and MOK pellets satisfied the A1 wood pellet standard for residential and small-scale commercial uses, as designated by the National Institute of Forest Science (NIFOS) of the Republic of Korea. When CW was used as an additive, durability of PIP pellets made with 12%-MC sawdust and MOK pellets increased. The optimal conditions for producing PIP and MOK pellets could be by adding 20 mesh CW as an additive and the using of 12%-MC sawdust. However, durability of PIP pellets and ash content MOK pellets did not satisfy the A1 wood pellet standard of NIFOS. Thus, further research is needed to improve the properties of wood pellets with additives.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.4
• /
• pp.57-62
• /
• 2003

The Mechanical and drying characteristics of Pinus densiflora wood, which was damaged by forest fire, and sound wood were examined. There were no significant differences in axial compressive properties, shearing strength and impact bending absorbed energy between damaged and sound woods. But the bending properties of damaged wood were slightly higher than those of sound wood. The green moisture content of sapwood in damaged wood was lower than that in sound wood, but oven-drying rate was similar in both woods. Number of initial check in damaged wood was smaller than that in sound wood, and inner check in damaged and sound woods was not observed. Consequently, it is considered that mostly damaged wood by forest fire can be used for wood material after removing the bark.