• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.163-163
• /
• 2010

저차원 나노양자구조에서 전자적 구조와 광 이득에 대한 연구는 전자소자나 광소자의 효율을 증진시키는데 중요한 역할을 하고 있다. 전자적 부띠 구조를 결정하기 위해서는 변형효과와 비포물선 효과를 고려하여 계산하면 나노 양자구조의 전자적 구조를 비교적 정확하게 계산 할 수 있다. 양자우물에서의 광 이득은 전자적 구조에 따른 전도 대역의 전자와 가전자 대역의 정공 사이에 발생하는 쿨롱 상호작용에 의한 엑시톤 결합 에너지를 고려함으로 정확히 계산할 수 있다. 본 연구에서는 양자 우물의 격자 부정합에 따른 변형효과와 전도대역에서 전자 에너지의 비포물선 효과가 양자 우물의 전자적 성질에 미치는 영향에 대하여 조사하였다. 또한, 온도변화에 따른 양자 우물의 전자적 구조를 계산하였고, 전자적 구조에 따라 엑시톤 결합 에너지가 광 이득에 미치는 영향을 계산하였다. 양자우물 구조에서 전자 및 정공의 부띠에너지, 파동함수 및 부띠천이 에너지를 가변메시 유한차분법으로 결정하였고, interacting pair Green's function 방법과 energy space integrated function 방법을 이용하여 광 이득을 계산하였다. 계산한 결과를 광루미네센스 측정으로 관측한 부띠에너지 천이와 비교하여 변형효과와 비포물선 효과가 전자적 구조에 미치는 영향과 엑시톤 결합 에너지가 광 이득에 미치는 영향에 대하여 비교하였다. 반도체 양자우물의 전자적 구조는 변형효과와 비포물선 효과에 의하여 영향을 받고 있는 것을 알 수 있었다. 또한, 전자-정공의 쿨롱 상호작용을 고려하여 계산한 광 이득이 온도 변화에 따라 관측한 실험 결과와 잘 맞는 것을 알 수 있었다. 이러한 결과는 격자 부정합한 화합물 반도체 양자우물의 저차원적인 전자적 구조와 광 특성을 이해하는데 많은 도움이 된다고 생각된다.

• Journal of Korea Society of Industrial Information Systems
• /
• v.11 no.2
• /
• pp.9-17
• /
• 2006

Over the last couple of years, established Cumulus Pricing Scheme(CPS) has become an important research issue for efficiently charging differentiated internet services. This paper proposes the adjusted CPS technique that expressed information of over or under-use of resources in bandwidth. And, 1 propose CPS with respect to the six main pricing and charging conditions. Also, accumulation technique may indicate an information between specified charging and eventually requires to adapt the initial contract. So called red and green Cumulus Points(CP) are used to judge the behavior of customer. At this point, the actual resource consumption is described by function v(t) at time t.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.5
• /
• pp.51-62
• /
• 2013

The water wave interactions on any three-dimensional structure of arbitrary geometry can be calculated numerically through the use of source distribution or Green's function techniques. However, such a method can be computationally expensive. In the present study, the water wave interactions in floating circular cylinder arrays were investigated numerically using the eigenfunction expansion method with the three- dimensional potential theory to reduce the computational expense. The wave excitation force, added mass coefficient, radiation damping coefficient, and wave run-up are presented with the water wave interactions in an array of 5 or 9 cylinders. The effects of the number of cylinders and the spacing between them are examined because the water wave interactions in floating circular cylinder arrays are significantly dependent upon these.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.3
• /
• pp.41-46
• /
• 2001

The very large vessels like VLCC and container ship have been built recently and those vessels have smaller structural strength in comparison with the other convectional skips. As a result the fatigue destruction of upper deck occurs a frequently due to the springing phenomenon at the encountering frequencies. In this study, the hydrodynamic loads are calculated by three-dimensional source distribution method with the translating and pulsating Green function. A ship is longitudinally divided into 23 sections and the added mass, damping and hydrodynamic force of each section is calculated. focusing only on the vertical motion. Stiffness matrix is calculated by the Euler beam theory. The calculation is carried out for Esso Osaka.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.3
• /
• pp.133-134
• /
• 1982

This experiment has been made to investigate the absorption of watersoluble zinc chloride by Pinus densiflora S. et Z. at different moisture content, under soaking process, to decide the optimum content condition for the maximum absorption of zinc chloride by the wood tested and to investigate the concentration of zinc chloride affecting each moisture content of wood. Material was cut in the Dept. of Forest, College of Agr. S.N.U. Suwon, Korea. Sample was divided into sap and heartwood group and cut $2{\times}2{\times}2\;cm$ in size, having exact three dimensions, using the part of D.B.H. The numbers of sample were 20 pieces for each moisture content condition for both sap and heartwood. Especially, the samples were protected from exposure to keep moisture content in green condition. The ranges of moisture content tested were as the table 3 and 4. The conclusions were as follows: 1. With 3% zinc chloride solution, the rate of absorption decreased with the time increased, if the air seasoned Korean red pine (Pinus densiflora S. et Z.) was treated in steeping process. Initial absorption for 30 minutes was more than 50% of total absorpon for 24 hours. 2. Rate of absorption was same under the green condition, while rate of absorption under the moisture content 7 to 30% varied. 3. Although it was not quite proportional change in the absorption with the difference of moisture content, the great change in the absorption occured by seasoning. With exception sap green condition, sapwood twice more permeable than the heartwood in the oven dried condition and it has been observed the nearly same amount of absorption at the moisture content of 7%, 10% and 15% respectively in heartwood. 4. It was better from water in wood from view-point of absorption of zinc chloride solution, but it was difficult practically to obtain the smallest moisture content, and then it was decided that values of allowable moisture content, on the basis of mean absorption, were 15% to 20% in the sapwood, and in the heartwood, 10% to 15%. The mean absorption for each moisture content in the sap and the heartwood were as following. 5. In general, the concentration of zinc chloride after steeping was nearly same between moisture content and sap and heartwood respectively.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.8 no.4
• /
• pp.274-286
• /
• 1996

Two-dimensional flexible body analysis (hydroelasticity theory) is adopted to a very large floating structure that may be multimodule and extend in the longitudinal direction. The boundary-element method (BEM) and Green function method(GFM) are used to obtain the hydrodynamic coefficients. The structure is considered to be a flexible beam responding to waves in the vertical direction and a consistent formulation for the hydrostatic stiffness is derived. The resulting coupled equations of motion are solved directly. Two designs of the module connectors are considered: a rotationally-flexible hinge connector, and a rotationally-rigid connector Numerical examples are presented to an integrated system of semi-submersibles. The analysis provides basic motions and section forces, which are useful to develop an understanding of the fundamental modes of displacement and force amplitudes for which multi-module VLFSs must be designed. The results show that while the hinge connectors result in greater motion, the rigid connectors increase substantially the sectional moments.

• Economic and Environmental Geology
• /
• v.27 no.5
• /
• pp.491-498
• /
• 1994

The integral equation method is used for magnetotelluric (MT) modeling of a finite inhomogeneity in a two-layered earth. An integral equation relates the incident plane-wave field and the scattering currents in the three-dimensional (3-D) inhomogeneity through the electric tensor Green's function appropriate to a layered earth. This paper describes an effect of overburden and basement on MT responses of 3-D body. The effect of overburden is to reduce the detectability of target, and the reduction of detectability is more apparent for conductive overburden than for resistive one. The effect of basement, on the other hand, may enhance the anomaly due to 3-D body in the upper layer. In case of the resistive basement current perturbations about the body tend to be confined to the more conductive upper layer.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.540-540
• /
• 2012

강우 발생시 유역에 집수된 물이 하천에 이르는 경로에 따른 유출은 지표유출, 지표하유출, 지하수유출로 구분된다. 정확한 수문순환 과정의 해석을 위해서는 지표 흐름뿐만 아니라 지표하 및 지하수 흐름의 해석이 중요한 실정이나 일반적으로 실무에서 사용되는 강우-유출해석 모형은 지표유출을 해석하기 위한 모형이 대부분이며, 지표하 유출과 침투량을 산정하는데 어려움이 있다. 일반적인 강우-유출해석 모형은 Horton 방법, NRCS 방법, Green-Ampt 방법에 의해 유효우량을 분리하며, 이 과정은 침투량을 직접적으로 모형화 할 수 없으므로 지표 및 지표하, 지하수 흐름을 복합적으로 해석할 수 있는 모형이 질적이나 양적으로 부족한 실정이다. 이러한 지표하 흐름과 침투량을 산정하기 위하여 FE-FLOW, PM, MS-VMS, GMS, GW-VISTAS, ARGUS 및 MODFLOW와 같은 지하수 모형을 사용하고 있다. 본 연구에서는 지표하유출 산정을 위한 침투량의 비교분석을 위해 현재 가장 범용되는 지하수 유동 모델링 프로그램인 Visual Modlfow 모형과 GMS 모형을 이용하여 침투량 산정을 위한 수치 모의를 진행하였다. 각 모형의 입력자료는 2009년 국립방재연구원에서 수행한 침투실험시설 자료를 이용하여 동일한 조건을 부여하고, 두 모형의 비교를 위해 Visual Modflow에서는 MODFLOW의 기본 해석방법인 유한차분법(FDM)을 이용하고, GMS 모형에서는 3차원 유한요소해석이 가능한 GMS-FEMWATER를 이용하였다. 두 모형의 수치모의 조건으로 2009년 국립방재연구원에서 수행한 침투실험방법과 동일하게 공극률에 따른 투수성 보도블럭의 구분과 50mm/hr, 100mm/hr, 150mm/hr, 200mm/hr의 강우강도별 선행함수조건에 따른 수치모의를 진행하였으며, 수치모의된 침투량의 적정성을 판단하기 위하여 국립방재연구원의 침투실험 결과자료와 비교분석하였다. 침투실험 자료와 각각 수치모의된 침투량을 비교분석한 결과 서로 유사한 경향을 보이고 있으나 초기 침투시 상대오차가 비교적 크게 발생하였다. 이는 수치모형의 경우 수리실험과는 다르게 모의시작과 동시에 해당 강우강도의 침투가 시작되므로 초기 유입 유출량 발생시간의 차이가 종료시간까지 누적 침투량에 미치는 것으로 판단되며, 매개변수에 많은 영향을 받는 것으로 판단된다.

• Korean Journal of Organic Agriculture
• /
• v.26 no.4
• /
• pp.649-660
• /
• 2018

To control the pepper anthracnose caused by Colletotrichum acutatum, antifungal bacterium strains which was selected among bacterium from natural soil, was tested the antimicrobial activity against various pathogens and its control efficacy on anthracnose disease in the fields. We confirmed that antagonistic activity of CAB13001 strain to pathogens such as Sclerotinia cepivorum, Sclerotinia sclerotium and Botrytis cinerea including Colletotrichum acutatum was remarkable superior with the dual culture method in the artificial medium. In vitro bioassay using the green pepper fruit, CAB13001 strain suppressed the lesion development of Anthracnose disease, and its control value compared to the untreated one was 82.4% on pepper fruit in field test. These results suggested that CAB13001 strain could be a very useful biological control agents to anthracnose disease caused by air born plant pathogens of pepper. By the way, analysis of nucleotide sequence of the gene 16S rDNA, antagonistic bacterium CAB13001 strain used in this study was identified as Burkholderia lata.

• Korean Journal of Remote Sensing
• /
• v.29 no.5
• /
• pp.555-568
• /
• 2013

Atmospheric optical thickness during nighttime was estimated in this study using analysis on the images of the moon taken from commercial digital camera. Basically the Langely Regression method was applied to the observations of the moon for the cloudless and optically stable sky conditions. The spectral response functions for the red(R), green(G), and blue(B) channels were employed to derive effective wavelength centers of each channel for the observations of the moon, and the correspondent Rayleigh optical thickness were also calculated. Aerosol optical thickness (AOT) was calculated by subtracting Rayleigh optical thickness from the atmospheric optical thickness derived from the Langley regression method. As there are only handful of nighttime AOT observations, the AOT from the moon observations was compared with the AOT from sun-photometers and the MODIS satellite sensor, which was taken several hours before the moon observations of this study. As a result, the values of AOT from moon observations agree with those from sun-photometers and MODIS within 0.1 for the R, G, B channels of the digital camera. On the other hand, ${\AA}$ngstr$\ddot{o}$m Exponent seems to be subject to larger errors due to its sensitiveness to the spectral errors of AOT. Nevertheless, the results of this study indicate that the method reported in this study is promising as it can provide nighttime AOT relatively easily with a low cost instrument like digital camera. More observations and analyses are warranted to attain improved nighttime AOT observations in the future.