• International Journal of Automotive Technology
• /
• 제4권2호
• /
• pp.95-100
• /
• 2003

Automobile industry has been developed rapidly as a key manufacturing industry in Korea. Meanwhile, air pollution is getting worse noticeably than ever. In the diesel emission, PM (Particulate Matter) and NOx (Nitrogen Oxides) have been exhausted with a great amount and the corresponding emission regulations are getting stringent. In order to develop low emission engines, it is necessary to research on better qualified fuels. Sulfur contained in fuel is transformed to sulfur compound by DOC (Diesel Oxidation Catalyst) and then it causes to the increase of sulfate-laden PM on the surface of catalyst. In this research, ULSD (Ultra Low Sulfur Diesel) is used as a fuel and some experimental results are investigated. ULSD can reduce not only PM but also gas materials because cetane value, flash point, distillation 90%, pour point and viscosity are improved in the process of desulfurization. However, excessively reduced sulfur may cause to decease lubricity of fuel and engine performance in fuel injection system. Therefore, it requires only modest adjusted amount of sulfur can improve engine performance and DOC, as well as decrease of emission.

• 한국통신학회논문지
• /
• 제35권12B호
• /
• pp.1192-1198
• /
• 2010

삶의 질이 향상되면서 현대 사회에서는 건강에 대한 관심도가 높아져 질병이 발생되기 전에 조기에 진단하여 예방하는 대체의학이 건강 패턴의 중심으로 자리잡고 있다. 이러한 대체의학 중 귀에 침을 자입하여 치료를 하는 것이 이침(耳針)요법이다. 따라서 본 논문에서는 신장과 관련된 이(耳)혈 상응점을 자극하여 신장의 기능이 향상되는 것을 얼굴 영역 색상 분석 기반 기술의 적용으로 실험을 수행하였다. 이를 위해 동일한 조건에서 시행되는 신장 이혈 상응점을 자극하기 전과 후의 얼굴 영상을 수집하였다. 수집된 얼굴 영상에서 신장과 관련된 지각 부위에 대해 CMYK 색체계 중 K값과 Lab 색체계 중 L값의 변화율을 추출, 분석하여 신장 기능의 향상 정도를 실험하는 연구를 수행하였다.

• 한국전자파학회논문지
• /
• 제11권2호
• /
• pp.278-285
• /
• 2000

본 논문에서는 급전점에서의 입력 임피던스 정합을 위해 리액턴스 소자를 이용한 지향성 틸트 다이폴 안테나 소자의 기본 특성을 검토하고 있다. 방사 지향성의 틸트는 급전점의 위치를 적절히 선돼하여 설현시키고, 틸트각 을 크게 변화시키지 않으면서 안테나를 강제적으로 공진시킬 수 있도록 리액턴스 소자를 장하시키고 있다. 수치 계산 결과, 방사 지향성의 틸트각을 크게 변화시키지 않으면서 강제공진을 취할 수 있도록 하기 위해서는 리액턴 스 소자를 급전점 부판에 장하시켜야 한다는 것을 확인할 수 있었다. 제안한 안테나의 길이를 $0,8\lambda$, 급전점을 $0.2\lambda$로 선택하였을 경우, 주 지향성의 틸트각은 57.7도가 얻어졌으며 전력이득은 최대 8,6 dB를 얻을 수 있었다.

• 대한기계학회논문집A
• /
• 제25권8호
• /
• pp.1246-1252
• /
• 2001

Reverse engineering has been widely used for the shape reconstruction of an object without CAD data and the measurement of clay or wood models for the development of new products. To generate a surface from measured points by a laser scanner, typical steps include the scanning of a clay or wood model and the generation of manufacturing data like STL file. A laser scanner has a great potential to get geometrical data of a model for its fast measuring speed and higher precision. The data from a laser scanner are composed of many line stripes of points. A new approach to remove point data with Delaunay triangulation is introduced to deal with problems during reverse engineering process. This approach can be used to reduce a number of measuring data from laser scanner within tolerance, thus it can avoid the time for handling point data during modelling process and the time for verifying and slicing STL model during RP process.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 지반환경 및 준설매립에관한 학술세미나
• /
• pp.42-71
• /
• 2001

Leakage detection system can possibly locate leak point without laboratory analysis. Several different types of sensors provide these benefits. But the use of these technologies is not widespread, mainly because of cost. Each of the leakage detection systems available has different advantages and disadvantages. The ideal system would be affordable, durable enough to last through the life of the landfill, automated, and applicable to all types of landfills. The laboratory tests were performed to investigate the relationship between electrical resistivity and the unsaturated subsurface condition and to evaluate the contamination due to leachate based on measuring electrical resistivity. The results of experiment show that the electrical resistivity of soil decreases as moisture density increases. The electrical resistivity of soil decreases as the concentration of leachate in pore fluid increases. These facts indicate that electrical resistivity method can be a promising tool in detecting of leachate. Also, the field model tests were conducted to verify that detection of leachate leak point on detection system using electrical characteristics is accurate. Field model test results of leakage detection system imply that the leakage detection system using electrical characteristics have the great potential of detecting exactly the leak point of leachate.

• Journal of Information Processing Systems
• /
• 제16권4호
• /
• pp.750-759
• /
• 2020

The wide application of various integrated location-based services (LBS social) and tourism application (app) has generated a large amount of trajectory space data. The trajectory data are used to identify popular tourist attractions with high density of tourists, and they are of great significance to smart service and emergency management of scenic spots. A hot spot analysis method is proposed, based on spatial clustering of trajectory stop points. The DBSCAN algorithm is studied with fast clustering speed, noise processing and clustering of arbitrary shapes in space. The shortage of parameters is manually selected, and an improved method is proposed to adaptively determine parameters based on statistical distribution characteristics of data. DBSCAN clustering analysis and contrast experiments are carried out for three different datasets of artificial synthetic two-dimensional dataset, four-dimensional Iris real dataset and scenic track retention point. The experiment results show that the method can automatically generate reasonable clustering division, and it is superior to traditional algorithms such as DBSCAN and k-means. Finally, based on the spatial clustering results of the trajectory stay points, the Getis-Ord Gi* hotspot analysis and mapping are conducted in ArcGIS software. The hot spots of different tourist attractions are classified according to the analysis results, and the distribution of popular scenic spots is determined with the actual heat of the scenic spots.

• 대한한의학회지
• /
• 제17권2호
• /
• pp.17-33
• /
• 1996

Chinese medical science with long history has experience and theory of cure and prevention as well as the perfect different system with western medicine. Western medical science also was introduced in recent times and has been used in fast development in China extensively. Therefore only China that coexist oriental and western medicine is used the term, the integration of oriental and western medicine. Its object is to make better treatment and prevention value with utilizing their strong point and weak point. That is, its great principle is to develop through interchange together without interference in the other science. For mutual growth of both medical science, national concern and support, medical staffs, administrative system and a lot of fruits, etc should be arranged simultaneously. This paper was obtained the as follows. 1. The system of public health administration is composed a sanitary department for a western medicine and a managing agency for a chinese one in the center. There are each local organization under the control both agency in the locality 2. The importance of the integration of chinese and western medicine is to get the merit of special chinese system through the interchange of both medicine and union with modem science and chinese pharmacy. 3. It is the long term and great project. So its important study field is illness treatment and cure, oriental medical remedy and theory, acupuncture and moxibution etc. 4. It makes steady progress in all the healthy medical field. It has studied its foundation, the education of medical staffs, scientific study and strengthening of skill management considerably. 5. The products are the development of new chinese medicines and many researches about traditional chinese medical science. In brief, the integration of chinese and western medical science is the historical stream. Besides it will contribute toward the cure and prevention of human illness for future 21 century.

• Korean Journal of Acupuncture
• /
• 제35권3호
• /
• pp.117-122
• /
• 2018

Objectives : Most meridians have each well point located at the distal end of fingers or toes, congruous with their meridian courses. Exceptively, ST45(Yeotae), stomach meridian(ST)'s final point, is located at the lateral side of the tip of the second toe, while the tip of the second toe was not mentioned in the course of ST. So, we studied the course of lower limb region of ST. Methods : Courses of ST in Categorized Collection of Literatures on Chinese Meridians and Collaterals(CCM) was examined. The literatures included in CCM was selected as study subjects to be studied if the meridian route was different from "Youngchu" or more detailed notes were attached. There are 3 branches in lower limb region of ST, we analyzed theories of scholars of all time about the 3 branches of ST. Results and Conclusions : Branch 1 descends along the lateral margin of the fibula to the dorsum of foot, entering into the medial side of the middle toe. Branch 2 leaves ST36 separately, terminating at the lateral side of the middle toe. Branch 3 leaves ST42 and descends to the end of the great toe. The medial side of the middle toe equate to the lateral side of the second toe, and it is connected to ST45. So branch 1 is the main stream of ST. Branch 3 drives to the great toe passing between first and second toe, it goes medial side of LR2.

• 대한화학회지
• /
• 제8권2호
• /
• pp.68-74
• /
• 1964

물은 용융점, 끓는점, 용융열 및 증발열등의 수소와 6족원소와의 화합물의 성질로부터 예측되는 값보다 훨씬 크고, ice-I녹을 때 부피의 감소가 일어나는 등 특이한 성질을 가지고 있다. 이와같은 성질들을 정량적으로 설명하려고 지금까지 많은 연구자들이 노력해왔다. 저자들은 물의 큰 표면자유에네르기와 용융시의 특수한 부피변화로 미루어 물의 구조모델을 다음과 같이 생각하였다. 즉, 얼음이 용융함에 따라 분자크기의 이동성 빈자리가 도입되면 물의 큰 표면에네르기 밀도로 말미암아 빈자리 주위의 물분자는 촘촘한 배열을 가지게 되면 빈자리에서 떨어져있는 분자는 ice-I의 구조를 가질것으로 생각된다. 빈자리 주위의 분자가 빈자리에 뛰어 들어갈 때는 이동자유도를 지니게 될 것이다. 저자들은 H. Eyring의 액체구조이론을 써서 물의 liquid partition function을 위에 말한 바와 같이 구조모델로부터 유도하고 물의 증기압, 용융 및 증발엔트로피 등 여러가지 열역학적 성질 및 몰부피를 계산하여 실측치와 좋은 일치를 얻었다.

• 수산해양교육연구
• /
• 제18권3호
• /
• pp.244-260
• /
• 2006

The main objective of this study aims at analyzing the national roles of fisheries in the global economy from the constitutional view point. Globalization provides general firms and businessmen with great opportunities that allow them to be able to plan and operate their business strategies beyond the national boundaries. WTO and FTA negotiations must be important facilitators of such globalization. However, Korean primary industries like fisheries under comparative disadvantage have a high probability that there may have to be the trade-offs between the primary and the industrial sector to maximize national benefits in the process of bilateral and/or multilateral international trade deals. Since, moreover, fishermen face strong binding constraints under which they hardly carry out fishing operations standing aloof from national boarders, they have to manage fishing businesses within their own national territory, to maintain and develop fisheries culture, and to explore their own destiny for themselves. Because of such reasons, the constitution imposes upon the State the duty to support and develop fisheries and fishing villages. Considering its article and spirit associated with fisheries(i.e. article 123), it seems unnecessary at this point in time that Korean society makes debates over national consensus for supporting fisheries. The reason is because the explicit provisions of the constitution do not allow their arbitrary interpretation depending upon interests or policy situations. However, where national support to the particular sector could not meet the expected social value system, there would be a great deal of chance to invite serious societal debates over such national commitment to the fisheries. Therefore, whether using it efficiently and realizing the socially expected policy goals must be a responsibility of both fisheries administration and fishing industries.