• 한국운동역학회지
• /
• 제14권1호
• /
• pp.117-131
• /
• 2004

The foreign superior players and national team players' turning phase was measured, compared and analyzed to help the representative players improve the skill of turn. The underwater video camera used to analyze and evaluate the representative players' skill of turn in detail and the result is as follows. 1. The record for the phase of turn was similar to the rank of the last record. The improvement of the skill of turn was required because Korean players' record was lower than the foreign players' one. In case of 200m events the 1st turn was the fastest and it took more time as the turn is repeated. 2. It shows that the preparation phase and turing motion cause the difference between the players and within one player. 3. The horizontal movement of center of gravity moves to turning point slowly in the preparation phase, does not move nearly in the turning phase and increase again in the propulsion phase. Good record has short time for turn phase. The result means that the shorten the turning phase is the most important factor. Therefore the preparation for this is required. The vertical movement is maintained or increase a little and then move to from the turning phase. 4. The characteristic of horizontal velocity in center of gravity is that there is any big changes at the preparation phase, the faster velocity is found from the better record and the accelerating time is fast at the propulsion phasen. The wrong motion is made by not using the swimming velocity for fuming and waiting and more time is required by this. 5. The angle of knee when the player touch the turning point is 106.22-135.56 and the maximum angle of knee during the driving after the touch of tuning point is full extension. The size of maximum angle of knee did not match with the required time of propulsion phase. It seems that the individual difference is big when the players touch the turning point the angle of knee and the research for the individual angle which can reveal the maximum power should be carried out. The national team player's skill for the him is behind the foreign players' one and a lot of problems were found. It shows that the players could not practice the skill for turn during the training. The 1st reason for it is the various facilities like underwater window or analyzing equipment like underwater camera with which the coaches can teach and correct the players' detailed skill. It is need to evaluate the players' detailed skill exactly and correct it by objective data to complete the good skill in the future. In this regard, the investment for the facility is necessary.

• 한국운동역학회지
• /
• 제30권1호
• /
• pp.17-25
• /
• 2020

Objective: The purpose of this study is to provide a better understanding of long turn mechanism by describing long turns after kinematic analysis and provide skiers and winter sports instructors with data through which they are able to analyze right postures for turns in skiing in a systematic, rational and scientific manner. Method: For this, a mean difference of kinematic variables (the center of gravity (CG) displacement of distance, trajectory, velocity, angle) was verified against a total of 12 skiers (skilled and unskilled, 6 persons each), regarding motions from the up-start to down-end points for long turns. Results: First, concerning the horizontal displacement of CG during a turn in skiing, skilled skiers were positioned on the right side at the upstart and edge-change points at a long turn. There was no difference in anteroposterior and vertical displacements. Second, in terms of CG-trajectory differences, skilled skiers revealed a significant difference during a long turn. Third, regarding skiing velocity, skilled skiers were fast at the edge-change and maximum inclination points in long turns. Fourth, there was no difference in a hip joint in terms of a lower limb joint angle. In a knee joint, a large angle was found at the up-start point among skilled skiers when they made a long turn. Conclusion: In overall, when skilled and unskilled skiers were compared, to make a good turn, it is required to turn according to the radius of turn by reducing weight, concerning the CG displacement. Regarding the CG-trajectory differences, the edge angle should be adjusted via proper inclination angulation. In addition, a skier should be more leaned toward the inside of a turn when they make a long turn. In terms of skiing velocity, it is needed to reduce friction on snow through the edging and pivoting of the radius or turn according to curvature and controlling ski pressure. Regarding a lower limb joint angle, it is important to make an up move by increasing ankle and knee angles instead of keeping the upper body straight during an up motion.

• 한국실내디자인학회논문집
• /
• 제34호
• /
• pp.3-9
• /
• 2002

Entering into the 21st century, digital culture and the innovation of media technology have drastically changed our understanding of the concept of space. Increased availability of information made possible by technological advancement has, directly or indirectly, contributed to the development of space design, which, in turn, offers a possibility for a new paradigm in space design. Given these fundamental changes, this study seeks to explore how to understand the expansion of the concept of space. In order to answer this question, this study investigates de-materialization tendency in modern architectural design such as transparency, anti-gravity, complexity and simultaneity of space. It examines the interaction-oriented nature of space among human, information and time. Finally, based on concepts such as new hyper-surface, which transcend the limitations of space and time, it explores new emerging trends in space design.

• 한국유체기계학회 논문집
• /
• 제19권3호
• /
• pp.19-24
• /
• 2016

Oil sands are a mixture of sand, clay, and a high-viscosity petroleum called bitumen. Steam-Assisted Gravity Drainage (SAGD) is the most viable and environmentally safe recovery technology for extracting bitumen. It extracts the viscosity-lowered bitumen by high pressure, high temperature steam injected into the bitumen reservoir. The steam is produced at the Central Processing Facility (CPF). Typically, more than 90% of the energy consumed in producing bitumen are used to generate the steam. Fuels are employed in the process, which cause economic and environmental problems. This paper explores the retrofit of heat exchanger network to reduce the usage of hot and cold utilities. The hot and cold utilities are reduced respectively 6% and 37.3% which in turn resulted in 5.3% saving of total annual cost by improving the existing heat exchanger network of the CPF.

• 한국항만학회지
• /
• 제14권3호
• /
• pp.291-301
• /
• 2000

T his paper presents the lateral and longitudinal control algorithm for the driving of a 4WS AGV(Automated Guided Vehicle). The control law to the lateral and longitudinal control of the AGV includes adaptive agin tuning ability, that is the controller gain of the gravity compensated PD controller can be changed on a real-time. The gain tuning law is derived from the Lyapunov direct method using the output error of the reference model and the actual model, And to show the performance of the presented lateral and longitudinal control algorithm, we simulate toe nonlinear AGV equations of the motion by deriving the Newton-Euler Method, The read path is from quay yard area to docking position in loading yard area. The quay yard area is where the quay crane loads the container to the AGV and the docking position is where the container is transferred to the gantry crane. The road types are constructed in a straight line and J-turn. When driving the straight line, the driving velocity is 6㎧ and the J-turn is 3㎧.

• International Journal of Aeronautical and Space Sciences
• /
• 제12권4호
• /
• pp.365-370
• /
• 2011

This paper presents the air-to-air missile autopilot design for a $180^{\circ}$ heading reversal maneuver during boost-phase. The missile's dynamics are linearized at a set of operating points for which angle of attack controllers are designed to cover an extended flight envelope. Then, angle of attack controllers are designed for this set of points, utilizing a pole-placement approach. The controllers' gains in the proposed configuration are computed from aerodynamic coefficients and design parameters in order to satisfy designer-chosen criteria. These design parameters are the closed-loop frequency, damping ratio, and time constant; these represent the characteristics of the control system. To cope with highly nonlinear and rapidly time varying dynamics during boost-phase, the global gain-scheduled controller is obtained by interpolating the controllers' gains over variations of the angle of attack, Mach number, and center of gravity. Simulation results show that the proposed autopilot design provides satisfactory performance and possesses good [ed: or "sufficient" or "excellent"] capabilities.

• 한국운동역학회지
• /
• 제29권4호
• /
• pp.219-226
• /
• 2019

Objective: The purpose of this study is to provide a better understanding of short turn mechanism by describing short turns after kinematic analysis and provide skiers and winter sports instructors with data through which they are able to analyze right postures for turns in skiing in a systematic, rational and scientific manner. Method: For this, a mean difference of kinematic variables (ski-hip angle, ski-shoulder twist angle, pole checking angle, the center of gravity (CG) displacement, trunk forward lean angle) was verified against a total of 12 skiers (skilled and unskilled, 6 persons each), regarding motions from the up-start to down-end points for short turns. Results: There was no difference in a ski-hip twist angle. The ski-shoulder twist angle was large at the up-start point while a pole-checking angle was high at the down-end point in skilled skiers. Concerning the horizontal displacement of CG, skilled skiers were positioned on the right side at the upstart point. No significant difference was observed in the trunk forward lean angle. Conclusion: According to the ski-shoulder twist angle and CG horizontal displacement results, the upper body should be kept leant toward the pole. In addition, big turns should be made via edging and angulation. During pole checking, the hand holding the pole should be thrown and released toward a vector direction of the forearm.

• Journal of Korea Trade
• /
• 제23권7호
• /
• pp.96-112
• /
• 2019

Purpose - "Trade Facilitation" aims the easier flow of trade across borders, driven not only by effective customs administration, the efficiency of appropriate authorities, but also by telecommunications, the quality of infrastructures and competent logistics. Facilitating trade will help lower trade development costs as well as improve economic development and enhance economic benefits for emerging economies at a time when imports and exports are sent in and out across borders several times in the form of intermediate and final products. Not only that, globalization is being accelerated, which in turn increases competitiveness and this makes logistics one of the key factors when it comes to international trade. Highly efficient logistics services promote product movement, ensure product safety and delivery speed, and reduce trade costs between countries. The purpose of this study is, by using the LPI indices based on gravity model estimates, to analyze the impact of each LPI component on trade with the 20 biggest exporting countries of Northeast Asian countries-Korea, Japan, and China-which account for 19.05% of global exports. Design/methodology - Also, this study statistically analyzes the impact of trade on Northeast Asian countries' top 20 exporting countries, using the LPI indices relevant to Trade Facilitation based on the gravity model estimates. Findings - As a result, it was turned out that the distance, GDP, and the LPI components have relevant impact on the trade exports of all three countries but demonstrated little relation to the demographic perspective. Originality/value - The study also found we can increase the trade volume by improving three countries' trade partners' LPI indices since Korea, Japan, and China share most of their 20 biggest trade partners.

• 한국산학기술학회논문지
• /
• 제19권2호
• /
• pp.64-70
• /
• 2018

대형트럭으로 견인되는 트레일러는 무게중심이 일반 차량에 비해 상대적으로 높기 때문에 전복사고 위험이 높게 된다. 곡선 주행 구간에서 차체를 기울여 곡선부의 주행속도를 향상시키는 원리를 적용하는 틸팅 시스템은 고속철도 차량에서 먼저 그 개념이 연구되고 사용되어 왔는데, 이 논문에서는 일반 대형트럭의 트레일러 적재함에 이 틸팅 시스템을 적용함으로써 아주 작은 틸팅각의 변화로도 급회전 시 주행 안정성을 크게 개선할 수 있는 가능성에 대해 연구하였다. 틸팅 가능한 트레일러의 동역학적 모델을 사용하여 선회주행 시 운동 관계식을 유도함으로써 주어진 도로 선회반경과 하중조건에 대해 원심력 효과와 수직력의 균형으로 전복임계속도를 결정할 수 있었다. 본 논문에서는 보수적인 기준을 선택하여 한쪽 바퀴가 지면으로부터 떨어지는 순간을 전복임계상태로 정의하였다. 실제로 틸팅 시스템을 작동시키기 위해서는 조향각과 주행속도로부터 최적 틸팅각을 계산해야 한다. 트레일러가 달린 대형트럭을 간단하게 모델링하고 시뮬레이션을 통해 곡선주행시 차량의 틸팅각에 따른 전복임계속도의 변화를 분석하고, 틸팅의 효과를 입증하였다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2004년도 춘계 학술발표대회 개요집
• /
• pp.176-178
• /
• 2004

Gas tungsten arc welds on Al-4 wt% Cu alloys were investigated to determine effects of gravitational orientation on the weld solidification behavior. Outward convection flows in the parallel-down weld might be inhibited because of its reverse direction with respect to the gravity vector. This resulted in abnormal 'S' shape of the trailing s-1 interface and the solidification rate (Vs), which was receded toward the weld pool center. Significant influence of gravitational orientation resulted in the variation on the weld pool shape associated with convection flows, which in turn affected solidification orientation/morphology and the primary dendrite spacing(λ$_1$).