• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 춘계 학술논문 발표대회
• /
• pp.103-107
• /
• 2008

This study was to execute the experiment for analyzing the quality characteristics of mortar by type of recycled sand by using the recycled sand produced by the manufacturing system by wet gravity separation in order to develop the removal device of impurities for the production of high-quality recycled sand. As a result, this study has sown that the mortar using the high-quality recycled sand through the manufacturing system by wet gravity separation in the fluidity property, strength property, and shrinkage property largely, compared with the mortar using low-quality recycled sand that not passed the device of sand flux. There was a tendency similar to the plane mortar. In conclusion, it was considered as various quality performances of the recycled sand were improved through the production stage of prototype.

• Journal of the Korean Wood Science and Technology
• /
• 제24권1호
• /
• pp.95-99
• /
• 1996

The bending and compression strength properties of two types Rhus verniciflua specimens, which made of no heat-treated wood and heat-treated wood for urushiol extraction, were measured. The heat-treated specimens were finger-jointed with either resorcinol-phenol or polyurethane resin adhesives, and the vertical type bending strength property was also measured in these specimens. The results obtained are as follows ; 1. The correlation coefficient between the compression strength and specific gravity in the specimens of no heat-treated and heat-treated wood was high. However there was no difference in compression strength property as affected by heat treatment. 2 The correlation coefficient between the bending strength and specific gravity in the specimens of no heat-treated and heat-treated wood was also high. However, there was no difference in bending strength property as affected by heat treatment. 3 The bending test showed high correlation between modulus of elasticity and modulus of rupture for the specimens made of no heat-treated and heat-treated wood. However, there was no difference in bending strength property between the specimens made of heat-treated and no heat-treated wood. 4. The efficiencies of bending strength test on the finger-jointed specimens of heat-treated wood with resorcinol-phenol and polyurethane resin adhesives were 0.85, 0.81. respectively.

• 한국주조공학회지
• /
• 제33권5호
• /
• pp.210-214
• /
• 2013

Recently, the automotive industry has replaced cast iron to lightweight materials like aluminum for engine efficiency of automobiles and an emission control by government. In this paper we studied two auto parts manufacturing methods using an alloy of A356. That is gravity casting and H-NCM Rheo-diecasting forging. We analyzed the microstructure and mechanical properties for this method. In Microstructure analysis results, H-NCM Rheo-diecasting forging has more finer microstrucre and better forging effect. Resulting in better mechanical properties than gravity forging.

• 지구물리
• /
• 제3권4호
• /
• pp.291-310
• /
• 2000

국립해양조사원이 1999년도 '해양2000'호를 이용하여 측정한 서해 남부지역의 선상 중력자료를 처리하였다. 자료처리 결과 264개 교점에서 고도이상의 RMS는 0.436mGal로 매우 좋은 결과를 나타내고 있다. 국립해양조사원이 '해양2000'호를 이용하여 측정한 선상 중력은 우리나라 일원의 중력관련 연에 매우 큰 기여를 할 것이다.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제37권3호
• /
• pp.194-204
• /
• 2010

실세계의 공간이나 이에 대응되는 가상세계의 공간은 공간의 일부인 지역(region)들과 그것들을 차지하고 있는 물리적 객체(physical object)들로 구성되어 있다. 이러한 공간 구성요소들간의 공간관계의 표현의 실제와의 부합성과 다양성은 이러한 공간에서 활동하는 에이전트의 공간관계 추론이나 이벤트(event)의 전개의 사설성과 정교함의 바탕이 된다. GIS나 AI 분야에서 연구되고 있는 기존의 공간관계 모델들은 객체의 규모에 따라 이원화된 영역에 적절한 모델들이거나 제한된 위상관계만 표현할 수 있기 때문에 다양한 지역과 객체를 가진 일반적 공간의 통합적 표현에는 부적합하다. 본 연구에서 개발될 공간표현 모델은, 첫째 대규모 공간과 소규모 공간 관계에 통합적으로 적용가능한 계층구조를 바탕으로 구성한다. 둘째, 소규모 객체들간에도 disjoint나 touch와 같이 제한된 위상 공간관계(topological relations)만이 아닌 접촉관계와 구성요소객체들의 조합을 바탕으로 하여 충분히 다양한 공간관계를 표현할 수 있도록 세분화한다. 셋째, solid object에 대비되는 container성질을 추가하고 중력 방향을 고려하여 공간관계를 추가로 다양화한다. 본 연구의 결과인 중력의 영향을 고려한 통합적 공간관계 모델은 컴퓨터상에서 실세계와 유사한 복잡한 가상공간을 공간적 사건들과 연관지어 정밀하게 시뮬레이션할 수 있게 하고 가상공간에서 에이전트들이 행동을 할 때 공간적 측면의 상황판단을 할 수 있도록 가상공간에 대한 에이전트들의 공간적 지식을 표현하는 수단을 제공한다.

• 한국공작기계학회논문집
• /
• 제15권1호
• /
• pp.113-118
• /
• 2006

In this work, we observed the changes in mass difference according to Al-foam's amount of Ca contents which depends on the viscosity control of fusion, quality of foamed addition, mixing, temperature tests. These are crucial influencing factors in determining foam-metal's size in the manufacturing process. In order to obtain the specimen, we changed the specific gravity from 0.2 to 0.3 for the study of the light weight, and obtained the optimal values of specific gravity, and then showed the mechanical characteristics of ultra-lightweight metal according to the changing mass. The optimal conditions for aluminum foam is when the addition of Ca content in $1.5wt\%~2.0wt\%$

• 패션비즈니스
• /
• 제11권5호
• /
• pp.155-164
• /
• 2007

Viscose rayon has advantages such as vivid luster, good dyeability, low static electricity, good absorbance and good spinnability but also has flaws such as easy crease and decrease of physical properties when it gets wetting, and it requires dry cleaning. Therefore in order to synthesize the polymer to solve the problems of rayon while keeping the advantages of it, this study made the high specific gravity polyester for ultra drape property and high contraction polyester for rayon-like fiber having volume, soft and warm sense. The polyester with high specific gravity, 1.47 was made by adding 7 wt% of $BaSO_4$ as additive. High contraction polyester was made by copolymerization by using IPA 5 mole% to increase the amorphous region as comonomer and also using Newpol BPE-20(NPE) 1.5 wt% not to decrease the properties.

• 아동학회지
• /
• 제28권4호
• /
• pp.245-264
• /
• 2007

This study analyzed physical knowledge displayed in the utterances of 10 Korean children 23 - 76 months of age. Utterances were blocked into four-month time periods, except the first two months and classified into 5 categories including properties of physical objects and materials, friction, buoyancy, gravity, and the motion of physical objects. All five types of physical expressions were found in the data of the earliest period the percent age of the properties and motion was higher than the percent of friction, buoyancy, and gravity. Data suggested two transitional points of change in physical knowledge : 2-year-old's descriptions were based only on perceptually salient physical features 3- to 4-year-olds described only end-state results while children older than 4 included systematic causality.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1190-1193
• /
• 2004

The purpose of this study is to evaluate the possibility of identifying joint damping property through commercially available isokinetic ergometer (BIODEX). The proposed method is to estimate the damping torque of the knee joint from the difference between the external joint torque for maintaining isokinetic movement and the gravity torque of the lower leg. The damping torque was estimated at various joint angular velocities, from which the damping property would be derived. Measurement setup was composed of the BIODEX system with an external force sensor and Labview system. Matlab was used in the analysis of the damping property. The experimental result showed that the small variation in angular velocity due to acceleration and deceleration of the crank arm resulted in greater change of inertial torque than the damping torque, so that the estimation of damping property from the isokinetic movement is difficult.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.245-250
• /
• 1998

The Elastic modulus depends on the elastic property of composition materials, the gravity of aggregate, the bond strength of binder, the usage and quantity of admixture, curing and measuring method, etc. Accordingly, the aim of this study, by manufacturing concrete of practical high strength range(600~ 1000kg/$\textrm{cm}^2$) with the specific cement and mineral admixtures, is to compare elastic modulus with the existing equations and also to estimate elastic property of use materials. As a result, it could be confirmed that the existing equations which were proposed by the ACI 363, CEB-FIP Code, and New-RC have a tendency to the overestimation in general. However, it could be confirmed that the KCI-96 and Norwegian NS 3473 equations are closed to measuring results, and that the elastic modulus property have a different tendency due to types of cements.